Re: [PATCH 2.6.25] igb: fix legacy mode irq issue

["Kok, Auke" <auke-jan.h.kok@intel.com>]

Andy Gospodarek wrote:
> I booted an igb kernel with the option pci=nomsi and instantly noticed
> that interrupts no longer worked on my igb device.  I took a look at the
> interrupt initialization and quickly discovered a comment stating:
> 
> "DO NOT USE EIAME or IAME in legacy mode"
> 
> It seemed a bit odd that bits to enable IAM were being set in legacy
> interrupt mode, so I dropped out the following parts and interrupts
> began working fine again.
> 
> Signed-off-by: Andy Gospodarek <andy@greyhouse.net>

looks valid, I'll test and see, thanks Andy

Auke


> ---
> 
>  igb_main.c |    3 ---
>  1 files changed, 3 deletions(-)
> 
> diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
> index f3c144d..be5da09 100644
> --- a/drivers/net/igb/igb_main.c
> +++ b/drivers/net/igb/igb_main.c
> @@ -472,9 +471,6 @@ static int igb_request_irq(struct igb_adapter *adapter)
>  		goto request_done;
>  	}
>  
> -	/* enable IAM, auto-mask */
> -	wr32(E1000_IAM, IMS_ENABLE_MASK);
> -
>  request_done:
>  	return err;
>  }
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html