From: Eric Dumazet <dada1@cosmosbay.com>
To: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Cc: herbert@gondor.apana.org.au, LKML <linux-kernel@vger.kernel.org>,
netdev@vger.kernel.org
Subject: Re: tbench regression in 2.6.25-rc1
Date: Fri, 15 Feb 2008 15:21:48 +0100 [thread overview]
Message-ID: <47B59FFC.4030603@cosmosbay.com> (raw)
In-Reply-To: <1203057044.3027.134.camel@ymzhang>
Zhang, Yanmin a écrit :
> On Fri, 2008-02-15 at 07:05 +0100, Eric Dumazet wrote:
>
>> Zhang, Yanmin a �crit :
>>
>>> Comparing with kernel 2.6.24, tbench result has regression with
>>> 2.6.25-rc1.
>>>
>>> 1) On 2 quad-core processor stoakley: 4%.
>>> 2) On 4 quad-core processor tigerton: more than 30%.
>>>
>>> bisect located below patch.
>>>
>>> b4ce92775c2e7ff9cf79cca4e0a19c8c5fd6287b is first bad commit
>>> commit b4ce92775c2e7ff9cf79cca4e0a19c8c5fd6287b
>>> Author: Herbert Xu <herbert@gondor.apana.org.au>
>>> Date: Tue Nov 13 21:33:32 2007 -0800
>>>
>>> [IPV6]: Move nfheader_len into rt6_info
>>>
>>> The dst member nfheader_len is only used by IPv6. It's also currently
>>> creating a rather ugly alignment hole in struct dst. Therefore this patch
>>> moves it from there into struct rt6_info.
>>>
>>>
>>> As tbench uses ipv4, so the patch's real impact on ipv4 is it deletes
>>> nfheader_len in dst_entry. It might change cache line alignment.
>>>
>>> To verify my finding, I just added nfheader_len back to dst_entry in 2.6.25-rc1
>>> and reran tbench on the 2 machines. Performance could be recovered completely.
>>>
>>> I started cpu_number*2 tbench processes. On my 16-core tigerton:
>>> #./tbench_srv &
>>> #./tbench 32 127.0.0.1
>>>
>>> -yanmin
>>>
>> Yup. struct dst is sensitive to alignements, especially for benches.
>>
>> In the real world, we need to make sure that next pointer start at a cache
>> line bondary (or a litle bit after), so that RT cache lookups use one cache
>> line per entry instead of two. This permits better behavior in DDOS attacks.
>>
>> (check commit 1e19e02ca0c5e33ea73a25127dbe6c3b8fcaac4b for reference)
>>
>> Are you using a 64 or a 32 bit kernel ?
>>
> 64bit x86-64 machine. On another 4-way Madison Itanium machine, tbench has the
> similiar regression.
>
>
On linux-2.6.25-rc1 x86_64 :
offsetof(struct dst_entry, lastuse)=0xb0
offsetof(struct dst_entry, __refcnt)=0xb8
offsetof(struct dst_entry, __use)=0xbc
offsetof(struct dst_entry, next)=0xc0
So it should be optimal... I dont know why tbench prefers __refcnt being
on 0xc0, since in this case lastuse will be on a different cache line...
Each incoming IP packet will need to change lastuse, __refcnt and __use,
so keeping them in the same cache line is a win.
I suspect then that even this patch could help tbench, since it avoids
writing lastuse...
diff --git a/include/net/dst.h b/include/net/dst.h
index e3ac7d0..24d3c4e 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -147,7 +147,8 @@ static inline void dst_use(struct dst_entry *dst,
unsigned long time)
{
dst_hold(dst);
dst->__use++;
- dst->lastuse = time;
+ if (time != dst->lastuse)
+ dst->lastuse = time;
}
next prev parent reply other threads:[~2008-02-15 14:21 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-15 1:52 tbench regression in 2.6.25-rc1 Zhang, Yanmin
2008-02-15 6:05 ` Eric Dumazet
2008-02-15 6:30 ` Zhang, Yanmin
2008-02-15 14:21 ` Eric Dumazet [this message]
2008-02-15 23:22 ` David Miller
2008-02-18 8:12 ` Zhang, Yanmin
2008-02-18 10:11 ` Eric Dumazet
2008-02-19 2:44 ` Zhang, Yanmin
2008-02-19 7:35 ` Eric Dumazet
2008-02-19 8:40 ` Zhang, Yanmin
2008-02-18 17:33 ` Valdis.Kletnieks
2008-02-19 6:51 ` Zhang, Yanmin
2008-02-19 7:40 ` Eric Dumazet
2008-02-20 7:04 ` Zhang, Yanmin
2008-02-20 7:38 ` Eric Dumazet
2008-02-20 8:14 ` David Miller
2008-02-20 8:41 ` Zhang, Yanmin
2008-02-18 1:39 ` Zhang, Yanmin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47B59FFC.4030603@cosmosbay.com \
--to=dada1@cosmosbay.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=yanmin_zhang@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).