From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Garzik Subject: Re: [PATCH] ixgbe: Correctly obtain protocol information on transmit Date: Fri, 15 Feb 2008 10:53:49 -0500 Message-ID: <47B5B58D.2040104@garzik.org> References: <20080212232033.13861.17859.stgit@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: e1000-devel@lists.sourceforge.net, netdev@vger.kernel.org, andy@greyhouse.net To: Auke Kok Return-path: In-Reply-To: <20080212232033.13861.17859.stgit@localhost.localdomain> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: e1000-devel-bounces@lists.sourceforge.net Errors-To: e1000-devel-bounces@lists.sourceforge.net List-Id: netdev.vger.kernel.org Auke Kok wrote: > In reply to "RE: [Fwd: [PATCH 2.6.25] ixgbe/igb: correctly obtain protocol > information on transmit]" from Andy Gospodarek: > > The driver was incorrectly looking at socket headers for > protocol information, needed for checksumming offload. Fix > this by not looking at the socket but frame headers instead. > > This disregards extension headers but it's unclear that linux > generates those anyway. > > Tested by Andy Gospodarek. > > Signed-off-by: Auke Kok applied ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/