From: Daniel Lezcano <dlezcano@fr.ibm.com>
To: David Miller <davem@davemloft.net>
Cc: Pavel Emelianov <xemul@openvz.org>,
Linux Netdev List <netdev@vger.kernel.org>
Subject: [net-2.6][DRIVER][VETH] fix dev refcount race
Date: Tue, 19 Feb 2008 17:18:00 +0100 [thread overview]
Message-ID: <47BB0138.1000104@fr.ibm.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1 bytes --]
[-- Attachment #2: veth-delete-fix.patch --]
[-- Type: text/x-patch, Size: 2830 bytes --]
Subject: veth fix dev refcount race
From: Daniel Lezcano <dlezcano@fr.ibm.com>
When deleting the veth driver, veth_close calls netif_carrier_off
for the two extremities of the network device. netif_carrier_off on
the peer device will fire an event and hold a reference on the peer
device. Just after, the peer is unregistered taking the rtnl_lock while
the linkwatch_event is scheduled. If __linkwatch_run_queue does not
occurs before the unregistering, unregister_netdevice will wait for
the dev refcount to reach zero holding the rtnl_lock and linkwatch_event
will wait for the rtnl_lock and hold the dev refcount.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
---
drivers/net/veth.c | 53 ++++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 40 insertions(+), 13 deletions(-)
Index: net-2.6/drivers/net/veth.c
===================================================================
--- net-2.6.orig/drivers/net/veth.c
+++ net-2.6/drivers/net/veth.c
@@ -244,18 +244,6 @@ static int veth_open(struct net_device *
return 0;
}
-static int veth_close(struct net_device *dev)
-{
- struct veth_priv *priv;
-
- if (netif_carrier_ok(dev)) {
- priv = netdev_priv(dev);
- netif_carrier_off(dev);
- netif_carrier_off(priv->peer);
- }
- return 0;
-}
-
static int veth_dev_init(struct net_device *dev)
{
struct veth_net_stats *stats;
@@ -286,13 +274,50 @@ static void veth_setup(struct net_device
dev->hard_start_xmit = veth_xmit;
dev->get_stats = veth_get_stats;
dev->open = veth_open;
- dev->stop = veth_close;
dev->ethtool_ops = &veth_ethtool_ops;
dev->features |= NETIF_F_LLTX;
dev->init = veth_dev_init;
dev->destructor = veth_dev_free;
}
+static void veth_change_state(struct net_device *dev)
+{
+ struct net_device *peer;
+ struct veth_priv *priv;
+
+ priv = netdev_priv(dev);
+ peer = priv->peer;
+
+ if (netif_carrier_ok(peer)) {
+ if (!netif_carrier_ok(dev))
+ netif_carrier_on(dev);
+ } else {
+ if (netif_carrier_ok(dev))
+ netif_carrier_off(dev);
+ }
+}
+
+static int veth_device_event(struct notifier_block *unused,
+ unsigned long event, void *ptr)
+{
+ struct net_device *dev = ptr;
+
+ if (dev->open != veth_open)
+ goto out;
+
+ switch (event) {
+ case NETDEV_CHANGE:
+ veth_change_state(dev);
+ break;
+ }
+out:
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block veth_notifier_block __read_mostly = {
+ .notifier_call = veth_device_event,
+};
+
/*
* netlink interface
*/
@@ -454,12 +479,14 @@ static struct rtnl_link_ops veth_link_op
static __init int veth_init(void)
{
+ register_netdevice_notifier(&veth_notifier_block);
return rtnl_link_register(&veth_link_ops);
}
static __exit void veth_exit(void)
{
rtnl_link_unregister(&veth_link_ops);
+ unregister_netdevice_notifier(&veth_notifier_block);
}
module_init(veth_init);
next reply other threads:[~2008-02-19 16:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-19 16:18 Daniel Lezcano [this message]
2008-02-19 16:30 ` [net-2.6][DRIVER][VETH] fix dev refcount race Pavel Emelyanov
2008-02-20 8:22 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47BB0138.1000104@fr.ibm.com \
--to=dlezcano@fr.ibm.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=xemul@openvz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).