From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Kok, Auke" Subject: Re: e1000e fails to find IRQ Date: Mon, 03 Mar 2008 10:05:43 -0800 Message-ID: <47CC3DF7.20907@intel.com> References: <20080303124443.52gfbwwmahxf7wmk@m.safari.iki.fi> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit To: Linux Networking Mailing List Return-path: Received: from mga02.intel.com ([134.134.136.20]:24058 "EHLO mga02.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1760885AbYCCSL0 (ORCPT ); Mon, 3 Mar 2008 13:11:26 -0500 Received: from [127.0.0.1] (localhost [127.0.0.1]) by ahkok-mobl.jf.intel.com (Postfix) with ESMTP id 09B1D40372 for ; Mon, 3 Mar 2008 10:05:44 -0800 (PST) In-Reply-To: <20080303124443.52gfbwwmahxf7wmk@m.safari.iki.fi> Sender: netdev-owner@vger.kernel.org List-ID: Sami Farin wrote: > e1000e says: > [ 844.557662] ACPI: PCI interrupt for device 0000:00:19.0 disabled > [ 848.739930] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 > [ 848.739936] e1000e: Copyright (c) 1999-2007 Intel Corporation. > > e1000 v 7.3.20-k2 and 7.6.15.4 work: > [ 883.836173] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 > [ 883.836179] Copyright (c) 1999-2006 Intel Corporation. > [ 883.836251] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 > [ 883.836266] PCI: Setting latency timer of device 0000:00:19.0 to 64 > [ 883.853782] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:00:5f:01 > [ 883.853789] e1000: 0000:00:19.0: e1000_probe: This device (id 8086:104a) will no longer be supported by this driver in the future. > [ 883.853909] e1000: 0000:00:19.0: e1000_probe: please use the "e1000e" driver instead. > [ 883.931690] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection > [ 883.993761] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 885.423079] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX > [ 885.423085] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO > [ 885.429521] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > I have Intel DQ965GF mobo, version CO96510J.86A.6002.2007.1125.2356, > Linux 2.6.24.3. a bit unclear what kernel version you are actually using here... the device that you have (ich8 onboard lan) is NOT supported in 2.6.24.x by e1000e - you'll have to use the e1000 driver until 2.6.25 ships. what kernel version are you using here? Auke