From: Arnd Hannemann <hannemann@nets.rwth-aachen.de>
To: "Ilpo Järvinen" <ilpo.jarvinen@helsinki.fi>
Cc: Netdev <netdev@vger.kernel.org>
Subject: Re: TCP IPv4 strange retransmits
Date: Wed, 05 Mar 2008 14:04:39 +0100 [thread overview]
Message-ID: <47CE9A67.5010002@nets.rwth-aachen.de> (raw)
In-Reply-To: <Pine.LNX.4.64.0803050819020.15712@kivilampi-30.cs.helsinki.fi>
Ilpo Järvinen wrote:
> On Wed, 5 Mar 2008, Arnd Hannemann wrote:
>
>> Ilpo Järvinen wrote:
>>
>>> No, if there's any skb which is more than fackets_out-tp->reordering from
>>> the highest SACKed skb, it will be marked TCPCB_LOST (see
>>> tcp_mark_head_lost & it's caller), and all LOST segments are retransmitted
>>> by the earlier loop (for a while still as I'm going to very likely change
>>> that in net-2.6.26, commits for consolidating both, nearly identical loops
>>> are already in my local git and await some testing).
>>>
>>> Forwardretrans is only incremented when there isn't TCPCB_LOST set for a
>>> segment and it doesn't apply in this case anyway because you have new data
>>> to send (see the decision making for forward retransmits, it's well
>>> commented btw).
>> Ah, I see. Thank you for clarifying.
>> However fackets_out is not so well documented ;-)
>
> I think I've fixed this for 2.6.25... :-) :
>
> ...
> /* Heurestics to calculate number of duplicate ACKs. There's no dupACKs
> * counter when SACK is enabled (without SACK, sacked_out is used for
> * that purpose).
> *
> * Instead, with FACK TCP uses fackets_out that includes both SACKed
> * segments up to the highest received SACK block so far and holes in
> * between them.
> *
> * With reordering, holes may still be in flight, so RFC3517 recovery
> * uses pure sacked_out (total number of SACKed segments) even though
> * it violates the RFC that uses duplicate ACKs, often these are equal
> * but when e.g. out-of-window ACKs or packet duplication occurs,
> * they differ. Since neither occurs due to loss, TCP should really
> * ignore them.
> */
> static inline int tcp_dupack_heurestics(struct tcp_sock *tp)
> ...
Great :-) But shouldn't it read "heuristics" ?
> ...Though some FACK comments seem to be saying something else still.
>
>> But it now makes all sense (with dump order):
>> An ACK 19225 arrives with SACK block {27745:29165}, so fackets_out becomes
>> ~6 ((27745-19225)/1450)
>> tp->reordering is 3 at this time so he starts to retransmit.
>> However some SACK ACK comes early enough so he stops at 4 retransmits.
>> Or something like that...
>
> Another thing you should consider is reordering detection which hopefully
> worked at 13:08:20.667529 through the newly discored SACK block which is
> _lower_ than the highestmost SACK block received so far. That results in
> FACK -> RFC3517, FACK is built on inorder assumptions and whenever we find
> that untrue, e.g., due to SACK/ACK for non-rexmit when something larger
> has been confirmed received we disable it. Ah, but this was 2.6.24.y? It
Yes, it was 2.6.24.2. Actually you can see reordering detection at work here[3],
the tool[4] we are using to measure TCP throughput samples the tcp_info struct and the
column #reor should reflect tp->reordering.
First it is 3 then it grows up to 16. Off course this is only a hint because
tcp_info is only sampled every 50ms in this example, but at least it shows that some
reordering detection took place...
> doesn't yet do RFC3517 IIRC, but has something remotely resembling
> newreno, but only for the first packet because the next cumulative ACK may
> often trigger timedout loop which basically marks everything lost (I don't
> remember if the latter was changed to occur only with FACK ages ago or
> not).
Not sure if I understood this. Will have to look into this some more.
>
>>>> Tcpdump:
>> Sorry, this was just bogus. Just wanted to point out the timestamp
>> differences and made a wrong example. Screen full of numbers... ;-)
>
> I thought so :-).
>
> ...Large, nearly equal numbers in two dimensions, maybe at some day
> I wake up and notice I've read them too long noticing that capturing
> this kind of things is no longer a problem to me... :-/
>
[3] http://www.umic-mesh.net/~hannemann/strange-reorder/flowgrind.output
[4] http://www.umic-mesh.net/research/tcp/flowgrind.html
next prev parent reply other threads:[~2008-03-05 13:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-04 13:00 TCP IPv4 strange retransmits Arnd Hannemann
2008-03-04 13:36 ` Ilpo Järvinen
2008-03-04 14:31 ` Arnd Hannemann
2008-03-04 21:04 ` H. Willstrand
2008-03-04 22:41 ` Arnd Hannemann
2008-03-04 21:07 ` Ilpo Järvinen
2008-03-04 21:19 ` Ilpo Järvinen
2008-03-04 23:03 ` Arnd Hannemann
2008-03-05 7:00 ` Ilpo Järvinen
2008-03-05 13:04 ` Arnd Hannemann [this message]
2008-03-05 19:32 ` Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47CE9A67.5010002@nets.rwth-aachen.de \
--to=hannemann@nets.rwth-aachen.de \
--cc=ilpo.jarvinen@helsinki.fi \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).