From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Kok, Auke" Subject: [ANNOUNCE] e1000 to e1000e migration of PCI Express devices Date: Fri, 04 Apr 2008 14:11:01 -0700 Message-ID: <47F69965.7030303@intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: Jeff Garzik , Greg KH , "Allan, Bruce W" , Jesse Brandeburg , "Ronciak, John" , Arjan van de Ven , Andrew Morton , Linus Torvalds , "David S. Miller" To: Linux Kernel Mailing List , NetDev , e1000-list , linux-pci maillist List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: e1000-devel-bounces@lists.sourceforge.net Errors-To: e1000-devel-bounces@lists.sourceforge.net List-Id: netdev.vger.kernel.org All, >>From kernel 2.6.26 onward all *PCI Express* device IDs previously supported by e1000 will be moving to the e1000e driver. This includes ich8 and ich9 onboard LAN, server 5000 platform onboard LAN (es2) and 82571/2/3 chipset based adapters and variants. If you have not already enabled CONFIG_E1000E make sure that you do so. You can already do this with 2.6.25. From 2.6.26 on this change will be required if you have such a device. It is also worthwhile to note you will have to update your modprobe.conf or equivalent file to point existing interfaces to the new driver. For clarity, please note that all 8254x devices are only supported by e1000, even if they are hidden behind a PCI Express bridge. They are still regular PCI or PCI-X devices. Intel will continue to support both e1000 and e1000e drivers in the kernel. Regards, Auke ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace