From: Pavel Emelyanov <xemul@openvz.org>
To: Linux Netdev List <netdev@vger.kernel.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>,
Patrick McHardy <kaber@trash.net>
Subject: [PATCH net-2.6.26 1/2] Shrink size of net_device by filling alignment holes in it.
Date: Mon, 07 Apr 2008 20:25:02 +0400 [thread overview]
Message-ID: <47FA4ADE.1020308@openvz.org> (raw)
I've found a much easier way to shrink the net_device structure
rather that moving all the operations out of it. However, since
the net_device may grow further, moving the operations into a
separate place may look reasonable.
The pahole tool showed, that there are a 124 and 80 bytes holes
before the queue_lock and the _xmit_lock respectively. Moving most
of the devices callbacks into the 2nd hole makes the sizeof of the
structure be 1024 bytes.
The hard_start_xmit callback is not moved to keep it in previous
cacheline.
I think it's OK to make such a reordering, since all these hooks
are a) read-only and b) not called on fast paths, so their place
within the structure looks not very important.
Unfortunately diff makes the patch look like moving other fields,
rater than the ops :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
---
include/linux/netdevice.h | 47 +++++++++++++++++++++++----------------------
1 files changed, 24 insertions(+), 23 deletions(-)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 8b17ed4..3397919 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -483,9 +483,6 @@ struct net_device
struct list_head napi_list;
#endif
- /* The device initialization function. Called only once. */
- int (*init)(struct net_device *dev);
-
/* ------- Fields preinitialized in Space.c finish here ------- */
/* Net device features */
@@ -641,27 +638,9 @@ struct net_device
int watchdog_timeo; /* used by dev_watchdog() */
struct timer_list watchdog_timer;
-/*
- * refcnt is a very hot point, so align it on SMP
- */
- /* Number of references to this device */
- atomic_t refcnt ____cacheline_aligned_in_smp;
-
- /* delayed register/unregister */
- struct list_head todo_list;
- /* device index hash chain */
- struct hlist_node index_hlist;
-
- struct net_device *link_watch_next;
-
- /* register/unregister state machine */
- enum { NETREG_UNINITIALIZED=0,
- NETREG_REGISTERED, /* completed register_netdevice */
- NETREG_UNREGISTERING, /* called unregister_netdevice */
- NETREG_UNREGISTERED, /* completed unregister todo */
- NETREG_RELEASED, /* called free_netdev */
- } reg_state;
+ /* The device initialization function. Called only once. */
+ int (*init)(struct net_device *dev);
/* Called after device is detached from network. */
void (*uninit)(struct net_device *dev);
/* Called after last user reference disappears. */
@@ -703,6 +682,28 @@ struct net_device
unsigned short vid);
int (*neigh_setup)(struct net_device *dev, struct neigh_parms *);
+
+/*
+ * refcnt is a very hot point, so align it on SMP
+ */
+ /* Number of references to this device */
+ atomic_t refcnt ____cacheline_aligned_in_smp;
+
+ /* delayed register/unregister */
+ struct list_head todo_list;
+ /* device index hash chain */
+ struct hlist_node index_hlist;
+
+ struct net_device *link_watch_next;
+
+ /* register/unregister state machine */
+ enum { NETREG_UNINITIALIZED=0,
+ NETREG_REGISTERED, /* completed register_netdevice */
+ NETREG_UNREGISTERING, /* called unregister_netdevice */
+ NETREG_UNREGISTERED, /* completed unregister todo */
+ NETREG_RELEASED, /* called free_netdev */
+ } reg_state;
+
#ifdef CONFIG_NETPOLL
struct netpoll_info *npinfo;
#endif
--
1.5.3.4
next reply other threads:[~2008-04-07 16:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-07 16:25 Pavel Emelyanov [this message]
2008-04-07 17:04 ` [PATCH net-2.6.26 1/2] Shrink size of net_device by filling alignment holes in it Eric Dumazet
2008-04-07 17:17 ` Eric Dumazet
2008-04-07 17:47 ` Arnaldo Carvalho de Melo
2008-04-08 8:41 ` Pavel Emelyanov
2008-04-16 9:12 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47FA4ADE.1020308@openvz.org \
--to=xemul@openvz.org \
--cc=kaber@trash.net \
--cc=netdev@vger.kernel.org \
--cc=shemminger@vyatta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).