Re: Question: Ethernet Phy issues on Colibri IMX8X (imx8qxp) - kernel 5.19

[Philipp Rossak <embed3d@gmail.com>]

Hi Marcel,

thanks!

With the removed line it is working now!

I hope there will be a mainlined solution soon.

Cheers
Philipp

On 10.08.22 10:05, Marcel Ziswiler wrote:
> Sali Philipp
> 
> On Wed, 2022-08-10 at 00:55 +0200, Philipp Rossak wrote:
>> Hi,
>>
>> I currently have a project with a Toradex Colibri IMX8X SOM board whith
>> an onboard Micrel KSZ8041NL Ethernet PHY.
>>
>> The hardware is described in the devictree properly so I expected that
>> the onboard Ethernet with the phy is working.
>>
>> Currently I'm not able to get the link up.
>>
>> I already compared it to the BSP kernel, but I didn't found anything
>> helpful. The BSP kernel is working.
>>
>> Do you know if there is something in the kernel missing and got it running?
> 
> Yes, you may just revert the following commit babfaa9556d7 ("clk: imx: scu: add more scu clocks")
> 
> Alternatively, just commenting out the following single line also helps:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clk/imx/clk-imx8qxp.c?h=v5.19#n172
> 
> I just found this out about two weeks ago before I went to vacation and since have to find out with NXP what
> exactly the idea of this clocking/SCFW stuff is related to our hardware.
> 
> @NXP: If any of you guys could shed some light that would be much appreciated. Thanks!
> 
>> Thanks,
>> Philipp
> 
> Cheers
> 
> Marcel