* Re: eepro100/e100 broken in 2.6.13-rc3
[not found] <20050714034954.52947263@laska>
@ 2005-07-14 6:28 ` Jesse Brandeburg
2005-07-14 7:26 ` Grant Coady
2005-07-14 20:07 ` Horst von Brand
0 siblings, 2 replies; 3+ messages in thread
From: Jesse Brandeburg @ 2005-07-14 6:28 UTC (permalink / raw)
To: Mikhail Kshevetskiy; +Cc: linux-kernel, netdev
On 7/13/05, Mikhail Kshevetskiy <kl@laska.dorms.spbu.ru> wrote:
> symptom
> =======
> modprobe e100
> ifconfig eth0 <ip> netmask <netmask>
>
> result:
> =======
> SIOCADDRT: Network is unreachable
>
> There were no such error in 2.6.13-rc2
odd, both e100 and eepro100 are broken? This might indicate something
wierd with the pci layer. Don't know what might cause the Network is
unreachable...
please send lspci -vvv of the e100 device in question and any output from dmesg
added netdev in case someone has an idea there.
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: eepro100/e100 broken in 2.6.13-rc3
2005-07-14 6:28 ` eepro100/e100 broken in 2.6.13-rc3 Jesse Brandeburg
@ 2005-07-14 7:26 ` Grant Coady
2005-07-14 20:07 ` Horst von Brand
1 sibling, 0 replies; 3+ messages in thread
From: Grant Coady @ 2005-07-14 7:26 UTC (permalink / raw)
To: Jesse Brandeburg; +Cc: Mikhail Kshevetskiy, linux-kernel, netdev
On Wed, 13 Jul 2005 23:28:15 -0700, Jesse Brandeburg <jesse.brandeburg@gmail.com> wrote:
>On 7/13/05, Mikhail Kshevetskiy <kl@laska.dorms.spbu.ru> wrote:
>> symptom
>> =======
>> modprobe e100
>> ifconfig eth0 <ip> netmask <netmask>
>>
>> result:
>> =======
>> SIOCADDRT: Network is unreachable
>>
>> There were no such error in 2.6.13-rc2
>
peetoo:~$ uname -r
2.6.13-rc3-a
peetoo:~$ lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0d.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08)
00:0e.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08)
00:0f.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 7a)
peetoo:~$ lsmod
Module Size Used by
adm9240 16056 0
i2c_sensor 2816 1 adm9240
radio_aztech 4316 0
nfsd 92296 5
exportfs 4576 1 nfsd
tulip 42496 0
e100 30656 0
usb_storage 30276 0
peetoo:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:90:27:58:EC:6F
inet addr:192.168.1.24 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3454075 errors:0 dropped:0 overruns:0 frame:0
TX packets:1759340 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:826224238 (787.9 Mb) TX bytes:99642515 (95.0 Mb)
eth1 Link encap:Ethernet HWaddr 00:04:AC:F3:4B:84
inet addr:192.168.3.24 Bcast:192.168.3.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth2 Link encap:Ethernet HWaddr 00:00:E8:4A:A0:C8
inet addr:192.168.4.24 Bcast:192.168.4.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:5 Base address:0x8000
Not broken here :)
--Grant.
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: eepro100/e100 broken in 2.6.13-rc3
2005-07-14 6:28 ` eepro100/e100 broken in 2.6.13-rc3 Jesse Brandeburg
2005-07-14 7:26 ` Grant Coady
@ 2005-07-14 20:07 ` Horst von Brand
1 sibling, 0 replies; 3+ messages in thread
From: Horst von Brand @ 2005-07-14 20:07 UTC (permalink / raw)
To: Jesse Brandeburg; +Cc: Mikhail Kshevetskiy, linux-kernel, netdev
Jesse Brandeburg <jesse.brandeburg@gmail.com> wrote:
> On 7/13/05, Mikhail Kshevetskiy <kl@laska.dorms.spbu.ru> wrote:
> > symptom
> > =======
> > modprobe e100
> > ifconfig eth0 <ip> netmask <netmask>
> >
> > result:
> > =======
> > SIOCADDRT: Network is unreachable
> >
> > There were no such error in 2.6.13-rc2
> odd, both e100 and eepro100 are broken? This might indicate something
> wierd with the pci layer. Don't know what might cause the Network is
> unreachable...
It works fine here... latest .git from yesterday.
--
Dr. Horst H. von Brand User #22616 counter.li.org
Departamento de Informatica Fono: +56 32 654431
Universidad Tecnica Federico Santa Maria +56 32 654239
Casilla 110-V, Valparaiso, Chile Fax: +56 32 797513
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-07-14 20:07 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20050714034954.52947263@laska>
2005-07-14 6:28 ` eepro100/e100 broken in 2.6.13-rc3 Jesse Brandeburg
2005-07-14 7:26 ` Grant Coady
2005-07-14 20:07 ` Horst von Brand
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).