From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paulius Zaleckas Subject: Re: remove special ioctl from hso driver, replace by rfkill Date: Fri, 18 Apr 2008 16:56:27 +0300 Message-ID: <4808A88B.4010703@teltonika.lt> References: <200804161428.18066.oliver@neukum.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Return-path: In-Reply-To: <200804161428.18066.oliver-GvhC2dPhHPQdnm+yROfE0A@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: netdev.vger.kernel.org Oliver Neukum wrote: > Hi, > > could you test this patch? > It does away with the one off serial ioctl replacing it with a standard > mechanism. > > Regards > Oliver I have tested rfkill and it realy works, but there is two problems: - LED on the device doesn't indicate rf state... Maybe Filip knows some usb command to control it? - driver creates multiple rfkill entries on sysfs... This is because option device has multi endpoints (probe is called twice with GTM380): T: Bus=01 Lev=03 Prnt=05 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0af0 ProdID=7211 Rev= 0.00 S: Manufacturer=Option N.V. S: Product=Globetrotter HSUPA Modem S: SerialNumber=Serial Number C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html