netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Garzik <jeff@garzik.org>
To: David Brownell <david-b@pacbell.net>
Cc: netdev@vger.kernel.org, nico@cam.org
Subject: Re: [RESEND/UPDATED patch 2.6.25] smc91x section fix
Date: Fri, 25 Apr 2008 02:02:33 -0400	[thread overview]
Message-ID: <481173F9.2040104@garzik.org> (raw)
In-Reply-To: <200804182001.18234.david-b@pacbell.net>

David Brownell wrote:
> From: David Brownell <dbrownell@users.sourceforge.net>
> 
> Section fixup:
> 
>   WARNING: drivers/net/built-in.o(.text+0x1a2c): Section mismatch
> 	in reference from the function smc_drv_probe()
> 	to the function .init.text:smc_probe()
>   The function smc_drv_probe() references
>   the function __init smc_probe().
>   This is often because smc_drv_probe lacks a __init
>   annotation or the annotation of smc_probe is wrong.
> 
> Also switch to platform_driver_probe(), and mark exit code as such.
> Total footprint shrinkage is about 2KB on ARMv5.
> 
> Note that few platform devices are actually hotpluggable, and these
> smc devices are evidently not exceptions to that rule ... else there
> would have been oopsing in this driver from the smc_probe() problem.
> 
> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> ---
> Changes since earlier version:  use platform_driver_probe(), add
> the __exit annotations, not how we can know this driver doesn't
> need to use hotplug-supporting "__devinit" annotations.
> 
>  drivers/net/smc91x.c |   12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> --- g26.orig/drivers/net/smc91x.c	2008-04-18 19:13:57.000000000 -0700
> +++ g26/drivers/net/smc91x.c	2008-04-18 19:15:57.000000000 -0700
> @@ -2097,7 +2097,8 @@ static inline void smc_request_datacs(st
>  	}
>  }
>  
> -static void smc_release_datacs(struct platform_device *pdev, struct net_device *ndev)
> +static void __exit smc_release_datacs(struct platform_device *pdev,
> +		struct net_device *ndev)
>  {
>  	if (SMC_CAN_USE_DATACS) {
>  		struct smc_local *lp = netdev_priv(ndev);
> @@ -2124,7 +2125,7 @@ static void smc_release_datacs(struct pl
>   *	0 --> there is a device
>   *	anything else, error
>   */
> -static int smc_drv_probe(struct platform_device *pdev)
> +static int __init smc_drv_probe(struct platform_device *pdev)
>  {
>  	struct net_device *ndev;
>  	struct resource *res, *ires;
> @@ -2214,7 +2215,7 @@ static int smc_drv_probe(struct platform
>  	return ret;
>  }
>  
> -static int smc_drv_remove(struct platform_device *pdev)
> +static int __exit smc_drv_remove(struct platform_device *pdev)
>  {
>  	struct net_device *ndev = platform_get_drvdata(pdev);
>  	struct smc_local *lp = netdev_priv(ndev);
> @@ -2278,8 +2279,7 @@ static int smc_drv_resume(struct platfor
>  }
>  
>  static struct platform_driver smc_driver = {
> -	.probe		= smc_drv_probe,
> -	.remove		= smc_drv_remove,
> +	.remove		= __exit_p(smc_drv_remove),
>  	.suspend	= smc_drv_suspend,
>  	.resume		= smc_drv_resume,
>  	.driver		= {
> @@ -2299,7 +2299,7 @@ static int __init smc_init(void)
>  #endif
>  #endif
>  
> -	return platform_driver_register(&smc_driver);
> +	return platform_driver_probe(&smc_driver, smc_drv_probe);
>  }
>  
>  static void __exit smc_cleanup(void)
> --

applied



  reply	other threads:[~2008-04-25  6:02 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-25  3:34 [patch 2.6.25-rc3] smc91x section fix David Brownell
2008-02-25  6:02 ` Sam Ravnborg
2008-02-25  6:33   ` David Brownell
2008-02-25 20:11     ` Sam Ravnborg
2008-04-19  3:01     ` [RESEND/UPDATED patch 2.6.25] " David Brownell
2008-04-25  6:02       ` Jeff Garzik [this message]
2008-07-25 20:11       ` David Brownell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=481173F9.2040104@garzik.org \
    --to=jeff@garzik.org \
    --cc=david-b@pacbell.net \
    --cc=netdev@vger.kernel.org \
    --cc=nico@cam.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).