netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pavel Emelyanov <xemul@openvz.org>
To: David Miller <davem@davemloft.net>
Cc: Linux Netdev List <netdev@vger.kernel.org>
Subject: [PATCH net-next 10/10][IP6MR]: Use on-device stats instead of private ones.
Date: Tue, 20 May 2008 20:44:39 +0400	[thread overview]
Message-ID: <4832FFF7.4080804@openvz.org> (raw)
In-Reply-To: <4832FBD7.7040209@openvz.org>

Similar to ipmr.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>

---
 net/ipv6/ip6mr.c |   22 +++++++---------------
 1 files changed, 7 insertions(+), 15 deletions(-)

diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 2de3c46..6d76103 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -388,8 +388,8 @@ static int pim6_rcv(struct sk_buff *skb)
 	skb->ip_summed = 0;
 	skb->pkt_type = PACKET_HOST;
 	dst_release(skb->dst);
-	((struct net_device_stats *)netdev_priv(reg_dev))->rx_bytes += skb->len;
-	((struct net_device_stats *)netdev_priv(reg_dev))->rx_packets++;
+	reg_dev->stats->rx_bytes += skb->len;
+	reg_dev->stats->rx_packets++;
 	skb->dst = NULL;
 	nf_reset(skb);
 	netif_rx(skb);
@@ -409,26 +409,20 @@ static struct inet6_protocol pim6_protocol = {
 static int reg_vif_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	read_lock(&mrt_lock);
-	((struct net_device_stats *)netdev_priv(dev))->tx_bytes += skb->len;
-	((struct net_device_stats *)netdev_priv(dev))->tx_packets++;
+	dev->stats->tx_bytes += skb->len;
+	dev->stats->tx_packets++;
 	ip6mr_cache_report(skb, reg_vif_num, MRT6MSG_WHOLEPKT);
 	read_unlock(&mrt_lock);
 	kfree_skb(skb);
 	return 0;
 }
 
-static struct net_device_stats *reg_vif_get_stats(struct net_device *dev)
-{
-	return (struct net_device_stats *)netdev_priv(dev);
-}
-
 static void reg_vif_setup(struct net_device *dev)
 {
 	dev->type		= ARPHRD_PIMREG;
 	dev->mtu		= 1500 - sizeof(struct ipv6hdr) - 8;
 	dev->flags		= IFF_NOARP;
 	dev->hard_start_xmit	= reg_vif_xmit;
-	dev->get_stats		= reg_vif_get_stats;
 	dev->destructor		= free_netdev;
 }
 
@@ -436,9 +430,7 @@ static struct net_device *ip6mr_reg_vif(void)
 {
 	struct net_device *dev;
 
-	dev = alloc_netdev(sizeof(struct net_device_stats), "pim6reg",
-			   reg_vif_setup);
-
+	dev = alloc_netdev(0, "pim6reg", reg_vif_setup);
 	if (dev == NULL)
 		return NULL;
 
@@ -1377,8 +1369,8 @@ static int ip6mr_forward2(struct sk_buff *skb, struct mfc6_cache *c, int vifi)
 	if (vif->flags & MIFF_REGISTER) {
 		vif->pkt_out++;
 		vif->bytes_out += skb->len;
-		((struct net_device_stats *)netdev_priv(vif->dev))->tx_bytes += skb->len;
-		((struct net_device_stats *)netdev_priv(vif->dev))->tx_packets++;
+		vif->dev->stats->tx_bytes += skb->len;
+		vif->dev->stats->tx_packets++;
 		ip6mr_cache_report(skb, vifi, MRT6MSG_WHOLEPKT);
 		kfree_skb(skb);
 		return 0;
-- 
1.5.3.4


  parent reply	other threads:[~2008-05-20 16:47 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-20 16:27 [PATCH net-next 0/10] Stir up struct net_device_stats usage and whereabouts Pavel Emelyanov
2008-05-20 16:29 ` [PATCH net-next 1/10][CORE]: The dev->get_stats pointer is not NULL nowadays Pavel Emelyanov
2008-05-20 16:32 ` [PATCH net-next 2/10][BRIDE]: Use on-device stats instead of private ones Pavel Emelyanov
2008-05-20 16:34 ` [PATCH net-next 3/10][IPGRE]: " Pavel Emelyanov
2008-05-20 16:36 ` [PATCH net-next 4/10][IPIP]: " Pavel Emelyanov
2008-05-20 16:36 ` [PATCH net-next 5/10][SIT]: " Pavel Emelyanov
2008-05-20 16:38 ` [PATCH net-next 6/10][IPMR]: Ipip tunnel uses on-device stats Pavel Emelyanov
2008-05-20 16:39 ` [PATCH net-next 7/10][TUNNELS]: Remove stat member from ip_tunnel struct Pavel Emelyanov
2008-05-20 16:41 ` [PATCH net-next 8/10][IP6TNL]: Use on-device stats instead of private ones Pavel Emelyanov
2008-05-20 16:43 ` [PATCH net-next 9/10][IPMR]: " Pavel Emelyanov
2008-05-20 16:44 ` Pavel Emelyanov [this message]
2008-05-21 21:18 ` [PATCH net-next 0/10] Stir up struct net_device_stats usage and whereabouts David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4832FFF7.4080804@openvz.org \
    --to=xemul@openvz.org \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).