netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Patrick McHardy <kaber@trash.net>
To: "David S. Miller" <davem@davemloft.net>
Cc: Linux Netdev List <netdev@vger.kernel.org>,
	Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>,
	Herbert Xu <herbert@gondor.apana.org.au>
Subject: [VLAN]: Use bitmask of feature flags instead of seperate feature bits
Date: Fri, 23 May 2008 09:02:39 +0200	[thread overview]
Message-ID: <48366C0F.4020905@trash.net> (raw)

[-- Attachment #1: Type: text/plain, Size: 254 bytes --]

Change the NETIF_F_VLAN flags to a bitmask of supported features,
as discussed with Herbert.

Tested by adding

+       netdev->vlan_features |= NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_SG | \
+                                NETIF_F_ALL_CSUM;
+

to e1000.


[-- Attachment #2: x --]
[-- Type: text/plain, Size: 3639 bytes --]

commit db2b989176f0e89f669ad8df34b2793ebbf0ab58
Author: Patrick McHardy <kaber@trash.net>
Date:   Fri May 23 08:33:37 2008 +0200

    [VLAN]: Use bitmask of feature flags instead of seperate feature bits
    
    Herbert Xu points out that the use of seperate feature bits for features
    to be propagated to VLAN devices is going to get messy real soon.
    Replace the VLAN feature bits by a bitmask of feature flags to be
    propagated and restore the old GSO_SHIFT/MASK values.
    
    Signed-off-by: Patrick McHardy <kaber@trash.net>

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 2b02664..f27fd20 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -514,12 +514,10 @@ struct net_device
 #define NETIF_F_NETNS_LOCAL	8192	/* Does not change network namespaces */
 #define NETIF_F_MULTI_QUEUE	16384	/* Has multiple TX/RX queues */
 #define NETIF_F_LRO		32768	/* large receive offload */
-#define NETIF_F_VLAN_TSO	65536	/* Supports TSO for VLANs */
-#define NETIF_F_VLAN_CSUM	131072	/* Supports TX checksumming for VLANs */
 
 	/* Segmentation offload features */
-#define NETIF_F_GSO_SHIFT	20
-#define NETIF_F_GSO_MASK	0xfff00000
+#define NETIF_F_GSO_SHIFT	16
+#define NETIF_F_GSO_MASK	0xffff0000
 #define NETIF_F_TSO		(SKB_GSO_TCPV4 << NETIF_F_GSO_SHIFT)
 #define NETIF_F_UFO		(SKB_GSO_UDP << NETIF_F_GSO_SHIFT)
 #define NETIF_F_GSO_ROBUST	(SKB_GSO_DODGY << NETIF_F_GSO_SHIFT)
@@ -747,6 +745,9 @@ struct net_device
 	/* rtnetlink link ops */
 	const struct rtnl_link_ops *rtnl_link_ops;
 
+	/* VLAN feature mask */
+	unsigned long vlan_features;
+
 	/* for setting kernel sock attribute on TCP connection setup */
 #define GSO_MAX_SIZE		65536
 	unsigned int		gso_max_size;
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 5196130..ab2225d 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -387,14 +387,8 @@ static void vlan_transfer_features(struct net_device *dev,
 {
 	unsigned long old_features = vlandev->features;
 
-	if (dev->features & NETIF_F_VLAN_TSO) {
-		vlandev->features &= ~VLAN_TSO_FEATURES;
-		vlandev->features |= dev->features & VLAN_TSO_FEATURES;
-	}
-	if (dev->features & NETIF_F_VLAN_CSUM) {
-		vlandev->features &= ~NETIF_F_ALL_CSUM;
-		vlandev->features |= dev->features & NETIF_F_ALL_CSUM;
-	}
+	vlandev->features &= ~dev->vlan_features;
+	vlandev->features |= dev->features & dev->vlan_features;
 
 	if (old_features != vlandev->features)
 		netdev_features_change(vlandev);
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index 7962569..5229a72 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -7,8 +7,6 @@
 #define VLAN_GRP_HASH_SIZE	(1 << VLAN_GRP_HASH_SHIFT)
 #define VLAN_GRP_HASH_MASK	(VLAN_GRP_HASH_SIZE - 1)
 
-#define VLAN_TSO_FEATURES	(NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_SG)
-
 /*  Find a VLAN device by the MAC address of its Ethernet device, and
  *  it's VLAN ID.  The default configuration is to have VLAN's scope
  *  to be box-wide, so the MAC will be ignored.  The mac will only be
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index b1cfbaa..5d055c2 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -663,10 +663,7 @@ static int vlan_dev_init(struct net_device *dev)
 					  (1<<__LINK_STATE_DORMANT))) |
 		      (1<<__LINK_STATE_PRESENT);
 
-	if (real_dev->features & NETIF_F_VLAN_TSO)
-		dev->features |= real_dev->features & VLAN_TSO_FEATURES;
-	if (real_dev->features & NETIF_F_VLAN_CSUM)
-		dev->features |= real_dev->features & NETIF_F_ALL_CSUM;
+	dev->features |= real_dev->features & real_dev->vlan_features;
 
 	/* ipv6 shared card related stuff */
 	dev->dev_id = real_dev->dev_id;

             reply	other threads:[~2008-05-23  7:02 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-23  7:02 Patrick McHardy [this message]
2008-05-23  7:09 ` [VLAN]: Use bitmask of feature flags instead of seperate feature bits Herbert Xu
2008-05-23  7:17   ` Waskiewicz Jr, Peter P
2008-05-23  7:21     ` David Miller
2008-05-23  7:30   ` David Miller
2008-05-23 17:38     ` Waskiewicz Jr, Peter P

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48366C0F.4020905@trash.net \
    --to=kaber@trash.net \
    --cc=davem@davemloft.net \
    --cc=herbert@gondor.apana.org.au \
    --cc=netdev@vger.kernel.org \
    --cc=peter.p.waskiewicz.jr@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).