From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jeff Garzik <jeff@garzik.org>
Subject: Re: POHMELFS high performance network filesystem. Cache coherency,
 transactions, parallels.
Date: Mon, 26 May 2008 03:27:59 -0400
Message-ID: <483A667F.7070707@garzik.org>
References: <20080525134055.GA30630@2ka.mipt.ru> <483A0F3B.9060709@garzik.org> <20080526062204.GA16366@2ka.mipt.ru> <483A59D7.7020306@garzik.org> <20080526070708.GB16366@2ka.mipt.ru>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	linux-fsdevel@vger.kernel.org
To: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Return-path: <netdev-owner@vger.kernel.org>
Received: from srv5.dvmed.net ([207.36.208.214]:43448 "EHLO mail.dvmed.net"
	rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
	id S1750871AbYEZH2B (ORCPT <rfc822;netdev@vger.kernel.org>);
	Mon, 26 May 2008 03:28:01 -0400
In-Reply-To: <20080526070708.GB16366@2ka.mipt.ru>
Sender: netdev-owner@vger.kernel.org
List-ID: <netdev.vger.kernel.org>

Evgeniy Polyakov wrote:
> I tries git-update-server-info on client and pushed all again, but it
> returned that everything is up-to-date.


git-update-server-info needs to be run on the server, not the client.

You can automate this by running this on the server:

	chmod +x .git/hooks/post-update

so that git-update-server-info always runs on the server, after each push.

See git-update-server-info(1) for more info.

	Jeff