netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shan Wei <shanwei@cn.fujitsu.com>
To: Brian Haley <Brian.Haley@hp.com>
Cc: "YOSHIFUJI Hideaki / 吉藤英明" <yoshfuji@linux-ipv6.org>,
	davem@davemloft.net, netdev@vger.kernel.org
Subject: Re: [GIT PULL net-2.6] IPv6 fixes.
Date: Wed, 04 Jun 2008 10:27:45 +0800	[thread overview]
Message-ID: <4845FDA1.1040009@cn.fujitsu.com> (raw)
In-Reply-To: <4845EDB0.7030809@hp.com>

Brian Haley 写道:
> YOSHIFUJI Hideaki / 吉藤英明 wrote:
>> Please consider pulling following fixes on top of net-2.6 tree
>> available at
>>     git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-fix.git
>> net-2.6-misc-20080604b
>>
> ...
>> commit c878bc2da63acd3b80ba4cf428702f6e98c55b3c
>> Author: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
>> Date:   Mon Jun 2 18:45:23 2008 +0900
>>
>>     [IPv6]: Check outgoing interface even if source address is
>> unspecified.
>>         The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO
>>     ancillary data, is not checked if the source address (ipi6_addr)
>>     is unspecified.  If the ipi6_ifindex is the not-exist interface,
>>     it should be fail and the errno should be set ENODEV.
>>         Based on patch from Shan Wei <shanwei@cn.fujitsu.com>.
>>         Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
>>     Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
>>
>> diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
>> index 94fa6ae..76d4ab4 100644
>> --- a/net/ipv6/datagram.c
>> +++ b/net/ipv6/datagram.c
>> @@ -535,27 +535,29 @@ int datagram_send_ctl(struct msghdr *msg, struct
>> flowi *fl,
>>                  fl->oif = src_info->ipi6_ifindex;
>>              }
>>  
>> -            addr_type = ipv6_addr_type(&src_info->ipi6_addr);
>> +            if (fl->oif) {
>> +                dev = dev_get_by_index(&init_net, fl->oif);
>> +                if (!dev)
>> +                    return -ENODEV;
>> +            }
>>  
>> -            if (addr_type == IPV6_ADDR_ANY)
>> +            addr_type = ipv6_addr_type(&src_info->ipi6_addr);
>> +            if (addr_type == IPV6_ADDR_ANY) {
>> +                if (dev)
>> +                    dev_put(dev);
>>                  break;
>> -
>> -            if (addr_type & IPV6_ADDR_LINKLOCAL) {
>> -                if (!src_info->ipi6_ifindex)
>> -                    return -EINVAL;
>> -                else {
>> -                    dev = dev_get_by_index(&init_net,
>> src_info->ipi6_ifindex);
>> -                    if (!dev)
>> -                        return -ENODEV;
>> -                }
>>              }
>> -            if (!ipv6_chk_addr(&init_net, &src_info->ipi6_addr,
>> +
>> +            if (((addr_type & IPV6_ADDR_LINKLOCAL) &&
>> +                 !src_info->ipi6_ifindex) ||
>> +                !ipv6_chk_addr(&init_net, &src_info->ipi6_addr,
> 
> I think this !src_info->ipi6_ifindex here should be !fl->oif - that will
> have been assigned correctly if it was zero and src_info->ipi6_ifindex
> was passed-in, and is what we used to do the device lookup.

the attached patch fix it.


Signed-off-by: Shan Wei<shanwei@cn.fujitsu.com>
---
 net/ipv6/datagram.c |   30 +++++++++++++++++-------------
 1 files changed, 17 insertions(+), 13 deletions(-)

diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index 94fa6ae..f3c7529 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -508,8 +508,6 @@ int datagram_send_ctl(struct msghdr *msg, struct flowi *fl,
 	int err = 0;
 
 	for (cmsg = CMSG_FIRSTHDR(msg); cmsg; cmsg = CMSG_NXTHDR(msg, cmsg)) {
-		int addr_type;
-		struct net_device *dev = NULL;
 
 		if (!CMSG_OK(msg, cmsg)) {
 			err = -EINVAL;
@@ -522,6 +520,10 @@ int datagram_send_ctl(struct msghdr *msg, struct flowi *fl,
 		switch (cmsg->cmsg_type) {
 		case IPV6_PKTINFO:
 		case IPV6_2292PKTINFO:
+		     {
+			int addr_type;
+			struct net_device *dev = NULL;
+
 			if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct in6_pktinfo))) {
 				err = -EINVAL;
 				goto exit_f;
@@ -534,22 +536,23 @@ int datagram_send_ctl(struct msghdr *msg, struct flowi *fl,
 					return -EINVAL;
 				fl->oif = src_info->ipi6_ifindex;
 			}
+			
+			if (fl->oif) {
+				dev = dev_get_by_index(&init_net, fl->oif);
+				if (!dev)
+					return -ENODEV;
+			}
 
 			addr_type = ipv6_addr_type(&src_info->ipi6_addr);
 
-			if (addr_type == IPV6_ADDR_ANY)
+			if (addr_type == IPV6_ADDR_ANY) {
+				if (dev)
+					dev_put(dev);
 				break;
-
-			if (addr_type & IPV6_ADDR_LINKLOCAL) {
-				if (!src_info->ipi6_ifindex)
-					return -EINVAL;
-				else {
-					dev = dev_get_by_index(&init_net, src_info->ipi6_ifindex);
-					if (!dev)
-						return -ENODEV;
-				}
 			}
-			if (!ipv6_chk_addr(&init_net, &src_info->ipi6_addr,
+		
+			if (((addr_type & IPV6_ADDR_LINKLOCAL) && !dev) ||
+			    !ipv6_chk_addr(&init_net, &src_info->ipi6_addr,
 					   dev, 0)) {
 				if (dev)
 					dev_put(dev);
@@ -561,6 +564,7 @@ int datagram_send_ctl(struct msghdr *msg, struct flowi *fl,
 
 			ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr);
 			break;
+		    }
 
 		case IPV6_FLOWINFO:
 			if (cmsg->cmsg_len < CMSG_LEN(4)) {
-- 
1.5.4.4



  parent reply	other threads:[~2008-06-04  2:28 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-04  0:49 [GIT PULL net-2.6] IPv6 fixes YOSHIFUJI Hideaki / 吉藤英明
2008-06-04  1:19 ` Brian Haley
2008-06-04  2:24   ` YOSHIFUJI Hideaki / 吉藤英明
2008-06-04  2:27   ` Shan Wei [this message]
2008-06-04  2:37     ` YOSHIFUJI Hideaki / 吉藤英明
2008-06-04  3:02       ` YOSHIFUJI Hideaki / 吉藤英明
2008-06-04  3:37         ` Shan Wei
2008-06-04 18:33           ` Brian Haley
2008-06-04 19:17             ` YOSHIFUJI Hideaki / 吉藤英明

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4845FDA1.1040009@cn.fujitsu.com \
    --to=shanwei@cn.fujitsu.com \
    --cc=Brian.Haley@hp.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).