From: Jeff Garzik <jgarzik-e+AXbWqSrlAAvxtiuMwx3w@public.gmane.org>
To: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
Cc: Greg KH <greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jari Tenhunen <jari.tenhunen-X3B1VOXEql0@public.gmane.org>,
Olivier Blin <blino-4qZELD6FgxhWk0Htik3J/w@public.gmane.org>,
Andrew Bird
<ajb-5+cxppFmGx6/3pe1ocb+s/XRex20P6io@public.gmane.org>,
Paul Rolland <rol-fjEKYshTNZ1eoWH0uzbU5w@public.gmane.org>,
Arjan van de Ven <arjan-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Andrew Morton
<akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
Subject: Re: [00/04] HSO driver bugfixes and updates
Date: Thu, 14 Aug 2008 04:45:01 -0400 [thread overview]
Message-ID: <48A3F08D.2000109@pobox.com> (raw)
In-Reply-To: <200808081353.30130.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
David Brownell wrote:
> On Friday 08 August 2008, Greg KH wrote:
>> Jeff,
>>
>> Here are 4 patches against 2.6.27-rc2 for the drivers/net/usb/hso.c
>> driver.
>
> And here's a fifth (resent) ... just fixing brokenKconfig.
>
> ==== CUT HERE
> From: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
>
> Move the Kconfig for the new "Option" driver so it's not in the
> middle of the usbnet-based drivers, so the dependency displays
> in the Kconfig user interfaces don't get trashed.
>
> Signed-off-by: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
> ---
> drivers/net/usb/Kconfig | 21 ++++++++++-----------
> 1 file changed, 10 insertions(+), 11 deletions(-)
>
> --- a/drivers/net/usb/Kconfig 2008-07-26 17:11:01.000000000 -0700
> +++ b/drivers/net/usb/Kconfig 2008-07-26 17:40:33.000000000 -0700
> @@ -154,17 +154,6 @@ config USB_NET_AX8817X
> This driver creates an interface named "ethX", where X depends on
> what other networking devices you have in use.
>
> -config USB_HSO
> - tristate "Option USB High Speed Mobile Devices"
> - depends on USB && RFKILL
> - default n
> - help
> - Choose this option if you have an Option HSDPA/HSUPA card.
> - These cards support downlink speeds of 7.2Mbps or greater.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called hso.
> -
> config USB_NET_CDCETHER
> tristate "CDC Ethernet support (smart devices such as cable modems)"
> depends on USB_USBNET
> @@ -337,5 +326,15 @@ config USB_NET_ZAURUS
> really need this non-conformant variant of CDC Ethernet (or in
> some cases CDC MDLM) protocol, not "g_ether".
>
> +config USB_HSO
> + tristate "Option USB High Speed Mobile Devices"
> + depends on USB && RFKILL
> + default n
> + help
> + Choose this option if you have an Option HSDPA/HSUPA card.
> + These cards support downlink speeds of 7.2Mbps or greater.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called hso.
>
> endmenu
applied
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2008-08-14 8:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-08 19:00 [00/04] HSO driver bugfixes and updates Greg KH
2008-08-08 19:01 ` [01/04] hso: fix oops in read/write callbacks Greg KH
[not found] ` <20080808190023.GA2953-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2008-08-08 19:01 ` [02/04] hso: fix refcounting on the ttyHSx devices Greg KH
2008-08-09 8:39 ` Paul Rolland
2008-08-08 19:02 ` [03/04] USB: HSO: make tty_operations const Greg KH
2008-08-08 19:02 ` [04/04] USB: HSO: minor fixes due to code review Greg KH
2008-08-14 8:45 ` Jeff Garzik
2008-08-08 20:53 ` [00/04] HSO driver bugfixes and updates David Brownell
[not found] ` <200808081353.30130.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-08-14 8:45 ` Jeff Garzik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48A3F08D.2000109@pobox.com \
--to=jgarzik-e+axbwqsrlaavxtiumwx3w@public.gmane.org \
--cc=ajb-5+cxppFmGx6/3pe1ocb+s/XRex20P6io@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=arjan-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=blino-4qZELD6FgxhWk0Htik3J/w@public.gmane.org \
--cc=david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org \
--cc=greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org \
--cc=jari.tenhunen-X3B1VOXEql0@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rol-fjEKYshTNZ1eoWH0uzbU5w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).