From: Wang Chen <wangchen@cn.fujitsu.com>
To: "David S. Miller" <davem@davemloft.net>, NETDEV <netdev@vger.kernel.org>
Subject: [PATCH 2/15] netdevice 82596: Convert directly reference of netdev->priv to netdev_priv()
Date: Tue, 26 Aug 2008 18:16:24 +0800 [thread overview]
Message-ID: <48B3D7F8.6050708@cn.fujitsu.com> (raw)
In-Reply-To: <48B3D717.7070706@cn.fujitsu.com>
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
---
drivers/net/82596.c | 28 ++++++++++++++--------------
1 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index da292e6..6b14dd2 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -457,7 +457,7 @@ static inline int wait_cfg(struct net_device *dev, struct i596_cmd *cmd, int del
static void i596_display_data(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
struct i596_cmd *cmd;
struct i596_rfd *rfd;
struct i596_rbd *rbd;
@@ -527,7 +527,7 @@ static irqreturn_t i596_error(int irq, void *dev_id)
static inline void init_rx_bufs(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
int i;
struct i596_rfd *rfd;
struct i596_rbd *rbd;
@@ -578,7 +578,7 @@ static inline void init_rx_bufs(struct net_device *dev)
static inline void remove_rx_bufs(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
struct i596_rbd *rbd;
int i;
@@ -592,7 +592,7 @@ static inline void remove_rx_bufs(struct net_device *dev)
static void rebuild_rx_bufs(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
int i;
/* Ensure rx frame/buffer descriptors are tidy */
@@ -611,7 +611,7 @@ static void rebuild_rx_bufs(struct net_device *dev)
static int init_i596_mem(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
#if !defined(ENABLE_MVME16x_NET) && !defined(ENABLE_BVME6000_NET) || defined(ENABLE_APRICOT)
short ioaddr = dev->base_addr;
#endif
@@ -764,7 +764,7 @@ failed:
static inline int i596_rx(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
struct i596_rfd *rfd;
struct i596_rbd *rbd;
int frames = 0;
@@ -959,7 +959,7 @@ static void i596_reset(struct net_device *dev, struct i596_private *lp,
static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
int ioaddr = dev->base_addr;
unsigned long flags;
@@ -1029,7 +1029,7 @@ static int i596_open(struct net_device *dev)
static void i596_tx_timeout (struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
int ioaddr = dev->base_addr;
/* Transmitter timeout, serious problems. */
@@ -1058,7 +1058,7 @@ static void i596_tx_timeout (struct net_device *dev)
static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
struct tx_cmd *tx_cmd;
struct i596_tbd *tbd;
short length = skb->len;
@@ -1244,9 +1244,9 @@ found:
dev->tx_timeout = i596_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
- dev->priv = (void *)(dev->mem_start);
+ dev->ml_priv = (void *)(dev->mem_start);
- lp = dev->priv;
+ lp = dev->ml_priv;
DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%zd bytes), "
"lp->scb at 0x%08lx\n",
dev->name, (unsigned long)lp,
@@ -1307,7 +1307,7 @@ static irqreturn_t i596_interrupt(int irq, void *dev_id)
}
ioaddr = dev->base_addr;
- lp = dev->priv;
+ lp = dev->ml_priv;
spin_lock (&lp->lock);
@@ -1450,7 +1450,7 @@ static irqreturn_t i596_interrupt(int irq, void *dev_id)
static int i596_close(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
unsigned long flags;
netif_stop_queue(dev);
@@ -1500,7 +1500,7 @@ static int i596_close(struct net_device *dev)
static void set_multicast_list(struct net_device *dev)
{
- struct i596_private *lp = dev->priv;
+ struct i596_private *lp = dev->ml_priv;
int config = 0, cnt;
DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
--
1.5.3.4
next prev parent reply other threads:[~2008-08-26 10:18 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-26 10:12 [PATCH 0/15] netdevice: Convert directly reference of netdev->priv to netdev_priv() Wang Chen
2008-08-26 10:16 ` Wang Chen [this message]
2008-09-03 13:57 ` [PATCH 2/15] netdevice 82596: " Jeff Garzik
2008-09-04 0:34 ` Wang Chen
2008-08-26 10:17 ` [PATCH 3/15] netdevice chelsio: " Wang Chen
2008-08-26 10:18 ` [PATCH 4/15] netdevice hamradio: " Wang Chen
2008-08-26 10:19 ` [PATCH 5/15] netdevice lance: " Wang Chen
2008-08-26 10:20 ` [PATCH 6/15] netdevice ni65: " Wang Chen
2008-08-26 10:23 ` [PATCH 7/15] netdevice ppp: " Wang Chen
2008-08-26 10:25 ` [PATCH 8/15] netdevice cycx_x25: " Wang Chen
2008-08-26 10:25 ` [PATCH 9/15] netdevice hdlc: " Wang Chen
2008-08-26 16:35 ` Krzysztof Halasa
2008-08-26 10:26 ` [PATCH 10/15] netdevice wanrouter: " Wang Chen
2008-08-26 10:27 ` [PATCH 11/15] netdevice airo: " Wang Chen
2008-08-26 10:28 ` [PATCH 12/15] netdevice libertas: " Wang Chen
2008-08-26 10:28 ` [PATCH 13/15] netdevice zd1201: " Wang Chen
2008-08-26 10:29 ` [PATCH 14/15] netdevice pc300: " Wang Chen
2008-08-26 10:30 ` [PATCH 15/15] netdevice sbni: " Wang Chen
2008-08-26 14:18 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-1 Wang Chen
2008-08-26 14:18 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-2 Wang Chen
2008-08-26 14:18 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-3 Wang Chen
2008-08-26 14:18 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-4 Wang Chen
2008-08-26 14:18 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-5 Wang Chen
2008-08-26 14:18 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-6 Wang Chen
2008-08-26 14:18 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-7 Wang Chen
2008-08-26 14:18 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-8 Wang Chen
2008-08-26 14:18 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-9 Wang Chen
2008-08-26 14:19 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-10 Wang Chen
2008-08-26 14:48 ` Ben Hutchings
2008-08-26 14:19 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-11 Wang Chen
2008-08-26 14:19 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-12 Wang Chen
2008-08-26 14:19 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-13 Wang Chen
2008-08-26 14:19 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-14 Wang Chen
2008-08-26 14:19 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-15 Wang Chen
2008-08-26 14:19 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-16 Wang Chen
2008-08-26 14:19 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-17 Wang Chen
2008-08-26 14:19 ` [PATCH 1/15] netdevice: safe convert to netdev_priv() #part-18 Wang Chen
2008-08-26 15:46 ` [PATCH 0/15] netdevice: Convert directly reference of netdev->priv to netdev_priv() David Dillow
2008-08-27 0:39 ` Wang Chen
2008-09-03 7:49 ` Wang Chen
2008-09-03 7:58 ` David Miller
2008-09-03 8:24 ` Wang Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48B3D7F8.6050708@cn.fujitsu.com \
--to=wangchen@cn.fujitsu.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).