From: Badalian Vyacheslav <slavon@bigtelecom.ru>
To: netdev@vger.kernel.org
Subject: NetDev! Please help!
Date: Sat, 20 Sep 2008 17:19:24 +0400 [thread overview]
Message-ID: <48D4F85C.8090709@bigtelecom.ru> (raw)
Hello all.
We buy 10 Intel servers and paste it to shape traffic. After 5-15 hours
all PC is was freeze! Kernel not see TCO watchdog at this platform and
can't reboot it!. Soft Watchdog not reboot pc in this situation. =(
At screen we see messages like this (when it freeze and i was near monitor):
http://www.kerneloops.org/guilty.php?guilty=dev_watchdog&version=2.6.26-release&start=1736704&end=1769471&class=warn
Also by netconsole we was get this one time:
[ 1352.245851] netconsole: network logging started
[ 1458.400133] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 1458.400133] All bugs added by David S. Miller <davem@redhat.com>
[ 4956.420298] CPU 1: Machine Check Exception: 0000000000000005
[ 4956.420298] e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang
[ 4956.420300] Tx Queue <0>
[ 4956.420300] TDH <81>
[ 4956.420301] TDT <81>
[ 4956.420302] next_to_use <81>
[ 4956.420302] next_to_clean <d6>
[ 4956.420303] buffer_info[next_to_clean]
[ 4956.420303] time_stamp <15498d>
[ 4956.420304] next_to_watch <d6>
[ 4956.420304] jiffies <15511c>
[ 4956.420305] next_to_watch.status <1>
[ 4956.420537] eth1: Detected Tx Unit Hang:
[ 4956.420538] TDH <b0>
[ 4956.420538] TDT <b0>
[ 4956.420539] next_to_use <b0>
[ 4956.420539] next_to_clean <5>
[ 4956.420540] buffer_info[next_to_clean]:
[ 4956.420540] time_stamp <15498e>
[ 4956.420541] next_to_watch <5>
[ 4956.420542] jiffies <15511c>
[ 4956.420542] next_to_watch.status <1>
[ 4956.423064] CPU 1: Bank 0: 3200004000000800
[ 4956.423190] CPU 1: Bank 5: 3200220024080400
[ 4956.423315] Kernel panic - not syncing: CPU context corrupt
[ 4956.423933] Rebooting in 3 seconds..[ 531.843998] CPU 2: Machine
Check Exception: 0000000000000005
[ 531.843998] CPU 0: Machine Check Exception: 0000000000000004
[ 531.844000] CPU 0: Bank 0: 3200004000000800
[ 531.844001] CPU 0: Bank 5: 3200121014040400
[ 531.844002] Kernel panic - not syncing: CPU context corrupt
[ 531.844916] Rebooting in 3 seconds..
This out of lspci:
00:00.0 Host bridge: Intel Corporation Server DRAM Controller
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network
Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller
(rev 02)
00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 02)
02:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e
[Pilot] ServerEngines (SEP1) (rev 02)
03:02.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
Controller (rev 05)
lspci -tv
-[0000:00]-+-00.0 Intel Corporation Server DRAM Controller
+-19.0 Intel Corporation 82566DM-2 Gigabit Network Connection
+-1a.0 Intel Corporation USB UHCI Controller #4
+-1a.1 Intel Corporation USB UHCI Controller #5
+-1a.2 Intel Corporation USB UHCI Controller #6
+-1a.7 Intel Corporation USB2 EHCI Controller #2
+-1c.0-[0000:01]--
+-1c.4-[0000:02]----00.0 Matrox Graphics, Inc. MGA G200e
[Pilot] ServerEngines (SEP1)
+-1d.0 Intel Corporation USB UHCI Controller #1
+-1d.1 Intel Corporation USB UHCI Controller #2
+-1d.2 Intel Corporation USB UHCI Controller #3
+-1d.7 Intel Corporation USB2 EHCI Controller #1
+-1e.0-[0000:03]----02.0 Intel Corporation 82541GI Gigabit
Ethernet Controller
+-1f.0 Intel Corporation LPC Interface Controller
+-1f.2 Intel Corporation 6 port SATA AHCI Controller
\-1f.3 Intel Corporation SMBus Controller
All tests in 2.6.26.2 kernel... now i try compile 2.6.26.5 kernel, but
if KernelOops is right - its not will help.
I hope NetDev help!
If any information or test is needed - please write!
Thanks for anyone!
Badalian Vyacheslav.
next reply other threads:[~2008-09-20 13:29 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-20 13:19 Badalian Vyacheslav [this message]
2008-09-20 13:38 ` NetDev! Please help! Badalian Vyacheslav
2008-09-20 18:11 ` Denys Fedoryshchenko
2008-09-21 16:11 ` Jarek Poplawski
[not found] ` <48D7385D.40107@bigtelecom.ru>
2008-09-22 6:53 ` Machine Check Exception " Jarek Poplawski
2008-09-22 8:05 ` Jarek Poplawski
2008-09-22 9:40 ` Badalian Vyacheslav
2008-09-22 11:24 ` Jarek Poplawski
2008-09-22 13:00 ` Badalian Vyacheslav
2008-09-22 17:23 ` Jarek Poplawski
2008-09-23 7:43 ` Badalian Vyacheslav
2008-09-23 9:25 ` Jarek Poplawski
2008-09-23 10:36 ` Badalian Vyacheslav
2008-09-23 11:57 ` Jarek Poplawski
2008-09-23 12:06 ` Jarek Poplawski
2008-09-23 12:16 ` Badalian Vyacheslav
2008-09-23 18:26 ` Jarek Poplawski
2008-09-20 18:31 ` Machine Check Exception Was: " Jarek Poplawski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48D4F85C.8090709@bigtelecom.ru \
--to=slavon@bigtelecom.ru \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).