From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Garzik Subject: Re: [PATCH 3/3] e1000e: remove failed request for sw/fw/hw flag Date: Wed, 24 Sep 2008 20:51:21 -0400 Message-ID: <48DAE089.20307@garzik.org> References: <20080923224630.6927.28967.stgit@jtkirshe-mobile.jf.intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Cc: mingo@elte.hu, davem@davemloft.net, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, jesse.brandeburg@intel.com, john.ronciak@intel.com, Bruce Allan To: Jeff Kirsher Return-path: Received: from srv5.dvmed.net ([207.36.208.214]:47060 "EHLO mail.dvmed.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752079AbYIYAv3 (ORCPT ); Wed, 24 Sep 2008 20:51:29 -0400 In-Reply-To: <20080923224630.6927.28967.stgit@jtkirshe-mobile.jf.intel.com> Sender: netdev-owner@vger.kernel.org List-ID: Jeff Kirsher wrote: > From: Bruce Allan > > When the driver fails to acquire the control flag used to serialize > NVM and PHY accesses between the driver, firmware and hardware, remove the > request for the flag otherwise the hardware might grant the flag when it > becomes available but the driver will not release the flag. This could > cause the firmware to prevent the driver getting the flag for all future > attempts. > > Signed-off-by: Bruce Allan > Signed-off-by: Jeff Kirsher > --- > > drivers/net/e1000e/ich8lan.c | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) applied