From mboxrd@z Thu Jan 1 00:00:00 1970 From: Denis Joseph Barrow Subject: using the hso driver with cisco vpn client Date: Thu, 09 Oct 2008 15:39:27 +0200 Message-ID: <48EE098F.8040407@option.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------070501020906080106010207" Cc: Linux netdev Mailing list , Paul Hardwick , Linux USB kernel mailing list To: =?ISO-8859-1?Q?N=E9meth_Tam=E1s?= , Filip Aben , Cisco Technical Support Return-path: Received: from mailer1.option.com ([81.246.70.162]:55883 "EHLO mailer1.option.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757694AbYJINjb (ORCPT ); Thu, 9 Oct 2008 09:39:31 -0400 Sender: netdev-owner@vger.kernel.org List-ID: This is a multi-part message in MIME format. --------------070501020906080106010207 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Hi Tamas, I just realised something. You don't need a faked ethernet port in the hso driver to get ciscos vpn client to work, I found out in the last few days that the modem port works just fine on the hso driver despite the misleading comment which implies otherwise. You should be able to use the modem interface in the hso driver to make a ppp connection, this should work with your vpn cisco client I've included a sample wvdial script which I use to make my connection. You can use to ./ports.sh script from our 1.6 distribution on pharscape to find the modem port of the 3g modem -- best regards, D.J. Barrow --------------070501020906080106010207 Content-Type: text/plain; name="wvdial.conf" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="wvdial.conf" [Dialer Defaults] Modem = /dev/ttyHS4 Stupid Mode = 1 Init = AT+CGDCONT=1,,"internet.proximus.be" Dial = ATD Phone = *99# Username = vodaphone Password = vodaphone Carrier Check = 1 #New PPPD = yes --------------070501020906080106010207--