Re: [PATCH 2/2] udp: RCU handling for Unicast packets.

[Eric Dumazet <dada1@cosmosbay.com>]

Corey Minyard a écrit :
> Paul E. McKenney wrote:
>> On Wed, Oct 29, 2008 at 05:09:53PM +0100, Eric Dumazet wrote:
>>  
>>> Corey Minyard a écrit :
>>>    
>>>> Eric Dumazet wrote:
>>>>      
>>>>> Corey Minyard found a race added in commit 
>>>>> 271b72c7fa82c2c7a795bc16896149933110672d
>>>>> (udp: RCU handling for Unicast packets.)
>>>>>
>>>>> "If the socket is moved from one list to another list in-between 
>>>>> the time  the hash is calculated and the next field is accessed, 
>>>>> and the socket  has moved to the end of the new list, the traversal 
>>>>> will not complete  properly on the list it should have, since the 
>>>>> socket will be on the end  of the new list and there's not a way to 
>>>>> tell it's on a new list and  restart the list traversal.  I think 
>>>>> that this can be solved by  pre-fetching the "next" field (with 
>>>>> proper barriers) before checking the  hash."
>>>>>
>>>>> This patch corrects this problem, introducing a new 
>>>>> sk_for_each_rcu_safenext()
>>>>> macro.
>>>>>         
>>>> You also need the appropriate smp_wmb() in udp_lib_get_port() after 
>>>> sk_hash is set, I think, so the next field is guaranteed to be 
>>>> changed after the hash value is changed.
>>>>       
>>> Not sure about this one Corey.
>>>
>>> If a reader catches previous value of item->sk_hash, two cases are to 
>>> be taken into :
>>>
>>> 1) its udp_hashfn(net, sk->sk_hash) is != hash   -> goto begin : 
>>> Reader will redo its scan
>>>
>>> 2) its udp_hashfn(net, sk->sk_hash) is == hash
>>>  -> next pointer is good enough : it points to next item in same hash 
>>> chain.
>>>     No need to rescan the chain at this point.
>>>     Yes we could miss the fact that a new port was bound and this UDP 
>>> message could be lost.
>>>     
>>
>> 3) its udp_hashfn(net, sk-sk_hash) is == hash, but only because it was
>> removed, freed, reallocated, and then readded with the same hash value,
>> possibly carrying the reader to a new position in the same list.
>>   
> If I understand this, without the smp_wmb(), it is possible that the 
> next field can be written to main memory before the hash value is 
> written.  If that happens, the following can occur:
> 
>  CPU1                    CPU2
>  next is set to NULL (end of new list)

Well, if this item is injected to the same chain, next wont be set to NULL.

That would mean previous writers deleted all items from the chain.

In this case, readers can see NULL, it is not a problem at all.
List is/was empty.
An application cannot complain a packet is not
handled if its bind() syscall is not yet completed :)

If item is injected on another chain, we will detect hash mismatch and redo full scan.

>                          fetch next
>                          calculate hash and compare to sk_hash
>  sk_hash is set to new value
> 
> So I think in the above cases, your case #2 is not necessarily valid 
> without the barrier.
> 
> And another possible issue.  If sk_hash is written before next, and CPU1 
> is interrupted before CPU2, CPU2 will continually spin on the list until 
> CPU1 comes back and moves it to the new list.  Note sure if that is an 
> issue.

Probably not. Previously, readers were spining on read_lock(), when 
a writer was inside its critical section (write_lock()/write_unlock()).
So instead of spining inside read_unlock(), issuing stupid memory 
transactions, the readers can now spin reading hash chain and populate
cpu cache :)