[patch 7/7] e100: adapt to the reworked PCI PM

[patch 7/7] e100: adapt to the reworked PCI PM

[akpm]

From: "Rafael J. Wysocki" <rjw@sisk.pl>

Adapt the e100 driver to the reworked PCI PM

* Use the observation that it is sufficient to call pci_enable_wake()
  once, unless it fails

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Frans Pop <elendil@planet.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/net/e100.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff -puN drivers/net/e100.c~e100-adapt-to-the-reworked-pci-pm drivers/net/e100.c
--- a/drivers/net/e100.c~e100-adapt-to-the-reworked-pci-pm
+++ a/drivers/net/e100.c
@@ -2211,7 +2211,8 @@ static int e100_set_wol(struct net_devic
 {
 	struct nic *nic = netdev_priv(netdev);
 
-	if(wol->wolopts != WAKE_MAGIC && wol->wolopts != 0)
+	if ((wol->wolopts && wol->wolopts != WAKE_MAGIC) ||
+	    !device_can_wakeup(&nic->pdev->dev))
 		return -EOPNOTSUPP;
 
 	if(wol->wolopts)
@@ -2219,6 +2220,8 @@ static int e100_set_wol(struct net_devic
 	else
 		nic->flags &= ~wol_magic;
 
+	device_set_wakeup_enable(&nic->pdev->dev, wol->wolopts);
+
 	e100_exec_cb(nic, NULL, e100_configure);
 
 	return 0;
@@ -2622,8 +2625,10 @@ static int __devinit e100_probe(struct p
 
 	/* Wol magic packet can be enabled from eeprom */
 	if((nic->mac >= mac_82558_D101_A4) &&
-	   (nic->eeprom[eeprom_id] & eeprom_id_wol))
+	   (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
 		nic->flags |= wol_magic;
+		device_set_wakeup_enable(&pdev->dev, true);
+	}
 
 	/* ack any pending wake events, disable PME */
 	pci_pme_active(pdev, false);
@@ -2682,11 +2687,10 @@ static int e100_suspend(struct pci_dev *
 	pci_save_state(pdev);
 
 	if ((nic->flags & wol_magic) | e100_asf(nic)) {
-		pci_enable_wake(pdev, PCI_D3hot, 1);
-		pci_enable_wake(pdev, PCI_D3cold, 1);
+		if (pci_enable_wake(pdev, PCI_D3cold, true))
+			pci_enable_wake(pdev, PCI_D3hot, true);
 	} else {
-		pci_enable_wake(pdev, PCI_D3hot, 0);
-		pci_enable_wake(pdev, PCI_D3cold, 0);
+		pci_enable_wake(pdev, PCI_D3hot, false);
 	}
 
 	pci_disable_device(pdev);
_

Re: [patch 7/7] e100: adapt to the reworked PCI PM

[Jeff Garzik]

akpm@linux-foundation.org wrote:
> From: "Rafael J. Wysocki" <rjw@sisk.pl>
> 
> Adapt the e100 driver to the reworked PCI PM
> 
> * Use the observation that it is sufficient to call pci_enable_wake()
>   once, unless it fails
> 
> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
> Tested-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
> Cc: Jeff Garzik <jeff@garzik.org>
> Cc: Frans Pop <elendil@planet.nl>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
> 
>  drivers/net/e100.c |   16 ++++++++++------
>  1 file changed, 10 insertions(+), 6 deletions(-)

applied