From: Jay Vosburgh <jay.vosburgh@canonical.com>
To: Debabrata Banerjee <dbanerje@akamai.com>
Cc: "David S . Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, Veaceslav Falico <vfalico@gmail.com>,
Andy Gospodarek <andy@greyhouse.net>
Subject: Re: [PATCH net-next 2/4] bonding: use common mac addr checks
Date: Fri, 11 May 2018 13:53:58 -0700 [thread overview]
Message-ID: <4921.1526072038@famine> (raw)
In-Reply-To: <20180511192548.8119-3-dbanerje@akamai.com>
Debabrata Banerjee <dbanerje@akamai.com> wrote:
>Replace homegrown mac addr checks with faster defs from etherdevice.h
>
>Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
>---
> drivers/net/bonding/bond_alb.c | 28 +++++++++-------------------
> 1 file changed, 9 insertions(+), 19 deletions(-)
>
>diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
>index c2f6c58e4e6a..180e50f7806f 100644
>--- a/drivers/net/bonding/bond_alb.c
>+++ b/drivers/net/bonding/bond_alb.c
>@@ -40,11 +40,6 @@
> #include <net/bonding.h>
> #include <net/bond_alb.h>
>
>-
>-
>-static const u8 mac_bcast[ETH_ALEN + 2] __long_aligned = {
>- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
>-};
> static const u8 mac_v6_allmcast[ETH_ALEN + 2] __long_aligned = {
> 0x33, 0x33, 0x00, 0x00, 0x00, 0x01
> };
>@@ -420,9 +415,7 @@ static void rlb_clear_slave(struct bonding *bond, struct slave *slave)
>
> if (assigned_slave) {
> rx_hash_table[index].slave = assigned_slave;
>- if (!ether_addr_equal_64bits(rx_hash_table[index].mac_dst,
>- mac_bcast) &&
>- !is_zero_ether_addr(rx_hash_table[index].mac_dst)) {
>+ if (is_valid_ether_addr(rx_hash_table[index].mac_dst)) {
This change and the similar ones below will now fail
non-broadcast multicast Ethernet addresses, where the prior code would
not. Is this an intentional change?
-J
> bond_info->rx_hashtbl[index].ntt = 1;
> bond_info->rx_ntt = 1;
> /* A slave has been removed from the
>@@ -525,8 +518,7 @@ static void rlb_req_update_slave_clients(struct bonding *bond, struct slave *sla
> client_info = &(bond_info->rx_hashtbl[hash_index]);
>
> if ((client_info->slave == slave) &&
>- !ether_addr_equal_64bits(client_info->mac_dst, mac_bcast) &&
>- !is_zero_ether_addr(client_info->mac_dst)) {
>+ is_valid_ether_addr(client_info->mac_dst)) {
> client_info->ntt = 1;
> ntt = 1;
> }
>@@ -567,8 +559,7 @@ static void rlb_req_update_subnet_clients(struct bonding *bond, __be32 src_ip)
> if ((client_info->ip_src == src_ip) &&
> !ether_addr_equal_64bits(client_info->slave->dev->dev_addr,
> bond->dev->dev_addr) &&
>- !ether_addr_equal_64bits(client_info->mac_dst, mac_bcast) &&
>- !is_zero_ether_addr(client_info->mac_dst)) {
>+ is_valid_ether_addr(client_info->mac_dst)) {
> client_info->ntt = 1;
> bond_info->rx_ntt = 1;
> }
>@@ -596,7 +587,7 @@ static struct slave *rlb_choose_channel(struct sk_buff *skb, struct bonding *bon
> if ((client_info->ip_src == arp->ip_src) &&
> (client_info->ip_dst == arp->ip_dst)) {
> /* the entry is already assigned to this client */
>- if (!ether_addr_equal_64bits(arp->mac_dst, mac_bcast)) {
>+ if (!is_broadcast_ether_addr(arp->mac_dst)) {
> /* update mac address from arp */
> ether_addr_copy(client_info->mac_dst, arp->mac_dst);
> }
>@@ -644,8 +635,7 @@ static struct slave *rlb_choose_channel(struct sk_buff *skb, struct bonding *bon
> ether_addr_copy(client_info->mac_src, arp->mac_src);
> client_info->slave = assigned_slave;
>
>- if (!ether_addr_equal_64bits(client_info->mac_dst, mac_bcast) &&
>- !is_zero_ether_addr(client_info->mac_dst)) {
>+ if (is_valid_ether_addr(client_info->mac_dst)) {
> client_info->ntt = 1;
> bond->alb_info.rx_ntt = 1;
> } else {
>@@ -1418,9 +1408,9 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
> case ETH_P_IP: {
> const struct iphdr *iph = ip_hdr(skb);
>
>- if (ether_addr_equal_64bits(eth_data->h_dest, mac_bcast) ||
>- (iph->daddr == ip_bcast) ||
>- (iph->protocol == IPPROTO_IGMP)) {
>+ if (is_broadcast_ether_addr(eth_data->h_dest) ||
>+ iph->daddr == ip_bcast ||
>+ iph->protocol == IPPROTO_IGMP) {
> do_tx_balance = false;
> break;
> }
>@@ -1432,7 +1422,7 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
> /* IPv6 doesn't really use broadcast mac address, but leave
> * that here just in case.
> */
>- if (ether_addr_equal_64bits(eth_data->h_dest, mac_bcast)) {
>+ if (is_broadcast_ether_addr(eth_data->h_dest)) {
> do_tx_balance = false;
> break;
> }
>--
>2.17.0
>
next prev parent reply other threads:[~2018-05-11 20:54 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-11 19:25 [PATCH net-next 0/4] bonding: performance and reliability Debabrata Banerjee
2018-05-11 19:25 ` [PATCH net-next 1/4] bonding: don't queue up extraneous rlb updates Debabrata Banerjee
2018-05-11 19:25 ` [PATCH net-next 2/4] bonding: use common mac addr checks Debabrata Banerjee
2018-05-11 20:53 ` Jay Vosburgh [this message]
2018-05-11 21:25 ` Banerjee, Debabrata
2018-05-11 21:29 ` Jay Vosburgh
2018-05-11 19:25 ` [PATCH net-next 3/4] bonding: allow use of tx hashing in balance-alb Debabrata Banerjee
2018-05-11 21:49 ` Jay Vosburgh
2018-05-11 19:25 ` [PATCH net-next 4/4] bonding: allow carrier and link status to determine link state Debabrata Banerjee
2018-05-11 22:04 ` Jay Vosburgh
2018-05-14 17:39 ` Banerjee, Debabrata
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4921.1526072038@famine \
--to=jay.vosburgh@canonical.com \
--cc=andy@greyhouse.net \
--cc=davem@davemloft.net \
--cc=dbanerje@akamai.com \
--cc=netdev@vger.kernel.org \
--cc=vfalico@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox