From: Yang Hongyang <yanghy@cn.fujitsu.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>,
"David S. Miller" <davem@davemloft.net>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Borislav Petkov <petkovbb@googlemail.com>
Subject: [PATCHv2 09/11]Replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28)
Date: Thu, 19 Feb 2009 17:50:22 +0800 [thread overview]
Message-ID: <499D2B5E.9020500@cn.fujitsu.com> (raw)
In-Reply-To: <499D2728.1080208@cn.fujitsu.com>
Replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28)
Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
---
drivers/net/wan/wanxl.c | 4 ++--
sound/pci/als300.c | 4 ++--
sound/pci/emu10k1/emu10k1x.c | 4 ++--
sound/pci/es1968.c | 4 ++--
sound/pci/ice1712/ice1712.c | 4 ++--
sound/pci/maestro3.c | 4 ++--
6 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index f1cef90..c94edaa 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -577,8 +577,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
We set both dma_mask and consistent_dma_mask to 28 bits
and pray pci_alloc_consistent() will use this info. It should
work on most platforms */
- if (pci_set_consistent_dma_mask(pdev, DMA_28BIT_MASK) ||
- pci_set_dma_mask(pdev, DMA_28BIT_MASK)) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(28)) ||
+ pci_set_dma_mask(pdev, DMA_BIT_MASK(28))) {
printk(KERN_ERR "wanXL: No usable DMA configuration\n");
return -EIO;
}
diff --git a/sound/pci/als300.c b/sound/pci/als300.c
index 8df6824..88bef04 100644
--- a/sound/pci/als300.c
+++ b/sound/pci/als300.c
@@ -689,8 +689,8 @@ static int __devinit snd_als300_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
printk(KERN_ERR "error setting 28bit DMA mask\n");
pci_disable_device(pci);
return -ENXIO;
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 5ff4dbb..d1422e0 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -897,8 +897,8 @@ static int __devinit snd_emu10k1x_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "error to set 28bit mask DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index e9c3794..f4e124d 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -2539,8 +2539,8 @@ static int __devinit snd_es1968_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 58d7cda..155c41e 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -2533,8 +2533,8 @@ static int __devinit snd_ice1712_create(struct snd_card *card,
if (err < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 59bbaf8..a3e9f6c 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -2530,8 +2530,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
return -EIO;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
--
1.6.0.3
--
Regards
Yang Hongyang
next prev parent reply other threads:[~2009-02-19 9:48 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-19 6:35 [PATCH 00/12]Next:Get rid of all the old micro DMA_XXBIT_MASK and use DMA_BIT_MASK(n) instead Yang Hongyang
2009-02-19 6:38 ` [PATCH 01/12]Replace all DMA_64BIT_MASK micro with DMA_BIT_MASK(64) Yang Hongyang
2009-02-19 6:40 ` [PATCH 02/12]Replace all DMA_48BIT_MASK micro with DMA_BIT_MASK(48) Yang Hongyang
2009-02-19 6:41 ` [PATCH 03/12]Replace all DMA_40BIT_MASK micro with DMA_BIT_MASK(40) Yang Hongyang
2009-02-19 6:44 ` [PATCH 04/12]Replace all DMA_39BIT_MASK micro with DMA_BIT_MASK(39) Yang Hongyang
2009-02-19 6:45 ` [PATCH 05/12]Replace all DMA_35BIT_MASK micro with DMA_BIT_MASK(35) Yang Hongyang
2009-02-19 6:46 ` [PATCH 06/12]Replace all DMA_32BIT_MASK micro with DMA_BIT_MASK(32) Yang Hongyang
2009-02-19 6:48 ` [PATCH 07/12]Replace all DMA_31BIT_MASK micro with DMA_BIT_MASK(31) Yang Hongyang
2009-02-19 6:49 ` [PATCH 00/12]Next:Get rid of all the old micro DMA_XXBIT_MASK and use DMA_BIT_MASK(n) instead Américo Wang
2009-02-19 8:52 ` Yang Hongyang
2009-02-19 6:49 ` [PATCH 08/12]Replace all DMA_30BIT_MASK micro with DMA_BIT_MASK(30) Yang Hongyang
2009-02-19 6:51 ` [PATCH 09/12]Replace all DMA_28BIT_MASK micro with DMA_BIT_MASK(28) Yang Hongyang
2009-02-19 6:53 ` [PATCH 10/12]Replace all DMA_24BIT_MASK micro with DMA_BIT_MASK(24) Yang Hongyang
2009-02-19 6:54 ` [PATCH 11/12]Remove defines of DMA_XXBIT_MASK micro Yang Hongyang
2009-02-19 8:14 ` Ingo Molnar
2009-02-19 8:56 ` Yang Hongyang
2009-02-19 9:32 ` [PATCHv2 00/11]Get rid of all the old macro DMA_nBIT_MASK and use DMA_BIT_MASK(n) instead Yang Hongyang
2009-02-19 9:36 ` [PATCHv2 01/11]Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Yang Hongyang
2009-02-19 9:38 ` [PATCHv2 02/11]Replace all DMA_48BIT_MASK macro with DMA_BIT_MASK(48) Yang Hongyang
2009-02-19 9:40 ` [PATCHv2 03/11]Replace all DMA_40BIT_MASK macro with DMA_BIT_MASK(40) Yang Hongyang
2009-02-19 9:42 ` [PATCHv2 04/11]Replace all DMA_39BIT_MASK macro with DMA_BIT_MASK(39) Yang Hongyang
2009-02-19 9:43 ` [PATCHv2 05/11]Replace all DMA_35BIT_MASK macro with DMA_BIT_MASK(35) Yang Hongyang
2009-02-19 9:45 ` [PATCHv2 06/11]Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Yang Hongyang
2009-02-19 12:50 ` Stefan Richter
2009-02-19 9:47 ` [PATCHv2 07/11]Replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31) Yang Hongyang
2009-02-19 9:48 ` [PATCHv2 08/11]Replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30) Yang Hongyang
2009-02-19 9:50 ` Yang Hongyang [this message]
2009-02-19 9:51 ` [PATCHv2 10/11]Replace all DMA_24BIT_MASK macro with DMA_BIT_MASK(24) Yang Hongyang
2009-02-19 9:53 ` [PATCHv2 11/11]Update the old macro DMA_nBIT_MASK related documentations Yang Hongyang
2009-02-19 12:47 ` [PATCHv2 00/11]Get rid of all the old macro DMA_nBIT_MASK and use DMA_BIT_MASK(n) instead Stefan Richter
2009-02-19 15:08 ` Ingo Molnar
2009-02-19 23:14 ` Andrew Morton
2009-02-20 10:29 ` Ingo Molnar
2009-02-19 6:55 ` [PATCH 12/12]Update related documentations Yang Hongyang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=499D2B5E.9020500@cn.fujitsu.com \
--to=yanghy@cn.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=netdev@vger.kernel.org \
--cc=petkovbb@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).