From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gary Thomas Subject: Re: Marvell 88E609x switch? Date: Wed, 25 Feb 2009 14:30:31 -0700 Message-ID: <49A5B877.8080403@mlbassoc.com> References: <49A49C06.90908@mlbassoc.com> <20090225131550.GA24996@xi.wantstofly.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: netdev@vger.kernel.org To: Lennert Buytenhek Return-path: Received: from 137-67-76-76.skybeam.com ([76.76.67.137]:5980 "EHLO mail.chez-thomas.org" rhost-flags-OK-FAIL-OK-OK) by vger.kernel.org with ESMTP id S1762016AbZBYVak (ORCPT ); Wed, 25 Feb 2009 16:30:40 -0500 In-Reply-To: <20090225131550.GA24996@xi.wantstofly.org> Sender: netdev-owner@vger.kernel.org List-ID: Lennert Buytenhek wrote: > On Tue, Feb 24, 2009 at 06:16:54PM -0700, Gary Thomas wrote: > >> Is there support for this device anywhere? In particular, >> the M88E6095 switch. > > Not at the moment, but it should be easy enough to add. If your > board already runs on 2.6.28+, I can whip up some patches for you > to try from the docs I have for that part. That would be much appreciated, thanks. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------