From: Yinghai Lu <yinghai@kernel.org>
To: "Rafael J. Wysocki" <rjw@sisk.pl>, David Miller <davem@davemloft.net>
Cc: Jesse Brandeburg <jesse.brandeburg@gmail.com>,
Ingo Molnar <mingo@elte.hu>,
Andrew Morton <akpm@linux-foundation.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
NetDev <netdev@vger.kernel.org>
Subject: Re: [PATCH] igb: fix kexec with igb
Date: Wed, 11 Mar 2009 16:37:18 -0700 [thread overview]
Message-ID: <49B84B2E.6080701@kernel.org> (raw)
In-Reply-To: <200903082232.36660.rjw@sisk.pl>
Rafael J. Wysocki wrote:
> On Sunday 08 March 2009, Rafael J. Wysocki wrote:
>> On Sunday 08 March 2009, Yinghai Lu wrote:
>>> Rafael J. Wysocki wrote:
>>>> On Saturday 07 March 2009, Yinghai Lu wrote:
>>>>> On Fri, Mar 6, 2009 at 11:18 PM, Jesse Brandeburg
>>>>> <jesse.brandeburg@gmail.com> wrote:
>>>>>> On Fri, Mar 6, 2009 at 8:33 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>>>>>>> Impact: could probe igb
>>>>>>>
>>>>>>> Found one system with 82575EB, in the kernel that is kexeced, probe igb
>>>>>>> failed with -2.
>>>>>>>
>>>>>>> it looks like the same behavior happened on forcedeth.
>>>>>>>
>>>>>>> try to check system_state to make sure if put it on D3
>>>>>>>
>>>>>>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>>>>>>>
>>>>>>> ---
>>>>>>> drivers/net/igb/igb_main.c | 19 ++++++++++++++-----
>>>>>>> 1 file changed, 14 insertions(+), 5 deletions(-)
>>>>>> I see the point of the patch, but I know for a fact that ixgbe when
>>>>>> enabled for MSI-X also doesn't work with kexec.
>>>>>>
>>>>>> so my questions are:
>>>>>> are you going to change every driver?
>>>>> i tend to only change driver that i have related HW.
>>>>>
>>>>>> why can't this be fixed in core kernel code instead?
>>>>> will check it.
>>>>>
>>>>>> Shouldn't pci_enable_device take it out of D3?
>>>>>> Or maybe it should be taken out of D3 immediately if someone tries to
>>>>>> ioremap any of the BARx registers?
>>>>> looks like second kernel can not detect the state any more.
>>>> In fact pci_enable_device() calls pci_set_power_state(dev, PCI_D0) as the first
>>>> thing. The question is why it doesn't work as expected.
>>> not sure... please check the version for forcedeth that you made.
>>>
>>> commit 3cb5599a84c557c0dd9a19feb63a3788268cf249
>>> Author: Rafael J. Wysocki <rjw@sisk.pl>
>>> Date: Fri Sep 5 14:00:19 2008 -0700
>>>
>>> forcedeth: fix kexec regression
>>>
>>> Fix regression tracked as http://bugzilla.kernel.org/show_bug.cgi?id=11361
>>> and caused by commit f735a2a1a4f2a0f5cd823ce323e82675990469e2 ("[netdrvr]
>>> forcedeth: setup wake-on-lan before shutting down") that makes network
>>> adapters integrated into the NVidia MCP55 chipsets fail to work in kexeced
>>> kernels. The problem appears to be that if the adapter is put into D3_hot
>>> during ->shutdown(), it cannot be brought back into D0 after kexec (ref.
>>> http://marc.info/?l=linux-kernel&m=121900062814967&w=4). Therefore, only
>>> put forcedeth into D3 during ->shutdown() if the system is to be powered
>>> off.
>> Thanks, I remember now.
>
> In which case you need to rework igb_shutdown() rather than igb_suspend().
>
> Something like the patch below, perhaps (totally untested).
it works, David, can you picked it up
---
From: Rafael J. Wysocki <rjw@sisk.pl>
[PATCH] igb: fix kexec with igb -v2
Impact: could probe igb
Found one system with 82575EB, in the kernel that is kexeced, probe igb
failed with -2.
it looks like the same behavior happened on forcedeth.
try to check system_state to make sure if put it on D3
v2: Rafael J. Wysocki seperate igb_shutdown and igb_suspend code
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/net/igb/igb_main.c | 24 +++++++++++++++++++-----
1 file changed, 19 insertions(+), 5 deletions(-)
Index: linux-2.6/drivers/net/igb/igb_main.c
===================================================================
--- linux-2.6.orig/drivers/net/igb/igb_main.c
+++ linux-2.6/drivers/net/igb/igb_main.c
@@ -4299,7 +4299,7 @@ int igb_set_spd_dplx(struct igb_adapter
}
-static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __igb_shutdown(struct pci_dev *pdev, bool enable_wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct igb_adapter *adapter = netdev_priv(netdev);
@@ -4359,7 +4359,7 @@ static int igb_suspend(struct pci_dev *p
}
/* make sure adapter isn't asleep if manageability/wol is enabled */
- if (wufc || adapter->en_mng_pt) {
+ if ((wufc || adapter->en_mng_pt) && enable_wake) {
pci_enable_wake(pdev, PCI_D3hot, 1);
pci_enable_wake(pdev, PCI_D3cold, 1);
} else {
@@ -4374,12 +4374,21 @@ static int igb_suspend(struct pci_dev *p
pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
return 0;
}
#ifdef CONFIG_PM
+static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+
+ retval = __igb_shutdown(pdev, true);
+ if (!retval)
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return retval;
+}
+
static int igb_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
@@ -4434,7 +4443,12 @@ static int igb_resume(struct pci_dev *pd
static void igb_shutdown(struct pci_dev *pdev)
{
- igb_suspend(pdev, PMSG_SUSPEND);
+ if (system_state == SYSTEM_POWER_OFF) {
+ __igb_shutdown(pdev, true);
+ pci_set_power_state(pdev, PCI_D3hot);
+ } else {
+ __igb_shutdown(pdev, false);
+ }
}
#ifdef CONFIG_NET_POLL_CONTROLLER
next prev parent reply other threads:[~2009-03-11 23:37 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-07 4:33 [PATCH] igb: fix kexec with igb Yinghai Lu
2009-03-07 7:18 ` Jesse Brandeburg
2009-03-07 7:31 ` Yinghai Lu
2009-03-07 18:20 ` Eric W. Biederman
2009-03-07 18:50 ` Yinghai Lu
2009-03-08 10:45 ` Rafael J. Wysocki
2009-03-08 10:57 ` Rafael J. Wysocki
2009-03-08 18:03 ` Yinghai Lu
2009-03-08 18:10 ` Yinghai Lu
2009-03-08 21:08 ` Rafael J. Wysocki
2009-03-08 21:18 ` Yinghai Lu
2009-03-08 21:40 ` Rafael J. Wysocki
2009-03-08 21:32 ` Rafael J. Wysocki
2009-03-08 22:35 ` Yinghai Lu
2009-03-08 22:57 ` Rafael J. Wysocki
2009-03-08 23:04 ` Yinghai Lu
2009-03-08 23:57 ` Rafael J. Wysocki
2009-03-11 23:37 ` Yinghai Lu [this message]
2009-03-21 22:04 ` [Updated patch] " Rafael J. Wysocki
2009-03-24 22:35 ` Yinghai Lu
2009-03-28 21:27 ` Rafael J. Wysocki
2009-03-29 2:30 ` Jeff Kirsher
2009-03-29 11:19 ` Rafael J. Wysocki
2009-03-30 21:36 ` Jeff Kirsher
2009-03-30 21:39 ` Rafael J. Wysocki
2009-03-31 19:14 ` Tantilov, Emil S
2009-03-31 19:51 ` Jeff Kirsher
2009-03-31 20:27 ` Rafael J. Wysocki
2009-03-08 8:09 ` [PATCH] pci: fix kexec with power state D3 Yinghai Lu
2009-03-08 10:08 ` Rafael J. Wysocki
2009-03-08 10:15 ` Ingo Molnar
2009-03-08 10:28 ` Rafael J. Wysocki
2009-03-08 10:33 ` Rafael J. Wysocki
2009-03-08 11:08 ` Ingo Molnar
2009-03-20 1:49 ` Jesse Barnes
2009-03-20 11:29 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49B84B2E.6080701@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=jesse.brandeburg@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=netdev@vger.kernel.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).