* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC [not found] <bug-12877-10286@http.bugzilla.kernel.org/> @ 2009-03-15 21:32 ` Andrew Morton 2009-03-16 21:23 ` Michael Chan 0 siblings, 1 reply; 16+ messages in thread From: Andrew Morton @ 2009-03-15 21:32 UTC (permalink / raw) To: mcarlson, mchan, netdev; +Cc: bugme-daemon, berni (switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface). On Sun, 15 Mar 2009 07:23:00 -0700 (PDT) bugme-daemon@bugzilla.kernel.org wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=12877 > > Summary: tg3: eth0 transit timed out, resetting -> dead NIC > Product: Drivers > Version: 2.5 > KernelVersion: 2.6.28.7 > Platform: All > OS/Version: Linux > Tree: Mainline > Status: NEW > Severity: high > Priority: P1 > Component: Network > AssignedTo: drivers_network@kernel-bugs.osdl.org > ReportedBy: berni@birkenwald.de > > > Latest working kernel version: none > Earliest failing kernel version: 2.6.28.1 > Distribution: Debian Lenny > Hardware Environment: HP DL320G5p > Software Environment: Debian Lenny host for KVM VMs > Problem Description: > > Every couple of weeks the network of my colo box dies with the following > message: > > [784060.816020] ------------[ cut here ]------------ > [784060.869153] WARNING: at net/sched/sch_generic.c:226 > dev_watchdog+0x121/0x1b8() > [784060.953146] NETDEV WATCHDOG: eth0 (tg3): transmit timed out > [784061.018138] Modules linked in: esp6 xfrm6_mode_tunnel authenc esp4 > xfrm4_mode_tunnel tun kvm_intel kvm xt_NOTRACK ip6table_raw ip6t_LOG > nf_conntrack_ipv6 ip6table_filter ip6_tables xt_physdev ipt_LOG xt_tcpudp > nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_hashlimit > iptable_filter ip_tables x_tables bridge stp llc deflate zlib_deflate > zlib_inflate ctr twofish twofish_common camellia serpent blowfish des_generic > cbc aes_x86_64 aes_generic xcbc sha256_generic sha1_generic crypto_null af_key > dm_crypt ipv6 coretemp loop ipmi_si ipmi_msghandler hpilo hpwdt pcspkr shpchp > pci_hotplug container button psmouse serio_raw evdev ext3 jbd dm_mirror > dm_region_hash dm_log dm_snapshot dm_mod raid1 md_mod sg sd_mod sr_mod cdrom > usbhid hid ata_piix ata_generic libata scsi_mod ide_pci_generic ide_core > ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys > [784061.891133] Pid: 0, comm: swapper Not tainted 2.6.28.7 #1 > [784061.954129] Call Trace: > [784061.983133] <IRQ> [<ffffffff802398aa>] warn_slowpath+0xb4/0xda > [784062.053147] [<ffffffffa0269998>] dst_output+0x0/0xb [ipv6] > [784062.118130] [<ffffffff803e35a8>] nf_hook_slow+0x62/0xc3 > [784062.180139] [<ffffffffa0269998>] dst_output+0x0/0xb [ipv6] > [784062.245126] [<ffffffff80332437>] __next_cpu+0x19/0x26 > [784062.305124] [<ffffffff80212a61>] read_tsc+0xa/0x1f > [784062.362126] [<ffffffff80251c69>] getnstimeofday+0x52/0xac > [784062.426126] [<ffffffff803d9bd1>] dev_watchdog+0x121/0x1b8 > [784062.490124] [<ffffffff8025015f>] sched_clock_tick+0x8a/0x92 > [784062.556124] [<ffffffff803d9ab0>] dev_watchdog+0x0/0x1b8 > [784062.618123] [<ffffffff80241f50>] run_timer_softirq+0x198/0x21a > [784062.687118] [<ffffffff80251c69>] getnstimeofday+0x52/0xac > [784062.751117] [<ffffffff8023e61a>] __do_softirq+0x83/0x143 > [784062.814116] [<ffffffff8020d6ec>] call_softirq+0x1c/0x28 > [784062.876119] [<ffffffff8020ecd0>] do_softirq+0x3c/0x81 > [784062.936114] [<ffffffff8023e338>] irq_exit+0x3f/0x83 > [784062.994139] [<ffffffff8021be99>] smp_apic_timer_interrupt+0x92/0xab > [784063.068116] [<ffffffff8020cef8>] apic_timer_interrupt+0x88/0x90 > [784063.138109] <EOI> [<ffffffffa03c4a20>] handle_halt+0x0/0x12 [kvm_intel] > [784063.217116] [<ffffffff802134fe>] mwait_idle+0x3c/0x46 > [784063.277113] [<ffffffff8020b0bd>] cpu_idle+0x51/0x92 > [784063.335127] ---[ end trace 444b547394c96982 ]--- > [784063.389142] tg3: eth0: transmit timed out, resetting > [784063.447106] tg3: DEBUG: MAC_TX_STATUS[ffffffff] MAC_RX_STATUS[ffffffff] > [784063.524104] tg3: DEBUG: RDMAC_STATUS[ffffffff] WDMAC_STATUS[ffffffff] > [784063.706035] tg3: tg3_stop_block timed out, ofs=2c00 enable_bit=2 > [784063.875340] tg3: tg3_stop_block timed out, ofs=2000 enable_bit=2 > [784064.044372] tg3: tg3_stop_block timed out, ofs=2400 enable_bit=2 > [784064.213191] tg3: tg3_stop_block timed out, ofs=2800 enable_bit=2 > [784064.382454] tg3: tg3_stop_block timed out, ofs=3000 enable_bit=2 > [784064.551295] tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2 > [784064.720269] tg3: tg3_stop_block timed out, ofs=1800 enable_bit=2 > [784064.889183] tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2 > [784065.057321] tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2 > [784065.226318] tg3: tg3_stop_block timed out, ofs=1000 enable_bit=2 > [784065.395423] tg3: tg3_stop_block timed out, ofs=1c00 enable_bit=2 > [784065.564199] tg3: tg3_abort_hw timed out for eth0, TX_MODE_ENABLE will not > clear MAC_TX_MODE=ffffffff > [784065.769278] tg3: tg3_stop_block timed out, ofs=3c00 enable_bit=2 > [784065.938319] tg3: tg3_stop_block timed out, ofs=4c00 enable_bit=2 > [784067.283239] tg3: eth0: No firmware running. > [784068.533652] tg3: tg3_abort_hw timed out for eth0, TX_MODE_ENABLE will not > clear MAC_TX_MODE=ffffffff > [784081.605984] tg3: eth0: Link is down. > > When it happens I either have to reboot the system or rmmod/modprobe tg3 to get > it working again. The interface affected is the routed upstream port of the > system, the system doesn't do much more than to route/firewall to an internal > bridge where several KVM VMs are connected to. eth0 has a shared physical port > with the on-board iLO2, which is still reachable when the problem happens. The > switchport bounces a couple of times though. > > Steps to reproduce: > ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-15 21:32 ` [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC Andrew Morton @ 2009-03-16 21:23 ` Michael Chan 2009-03-16 22:46 ` Bernhard Schmidt 2009-03-17 22:09 ` Bernhard Schmidt 0 siblings, 2 replies; 16+ messages in thread From: Michael Chan @ 2009-03-16 21:23 UTC (permalink / raw) To: Andrew Morton Cc: Matthew Carlson, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org, berni@birkenwald.de On Sun, 2009-03-15 at 14:32 -0700, Andrew Morton wrote: > > [784063.389142] tg3: eth0: transmit timed out, resetting > > [784063.447106] tg3: DEBUG: MAC_TX_STATUS[ffffffff] MAC_RX_STATUS[ffffffff] > > [784063.524104] tg3: DEBUG: RDMAC_STATUS[ffffffff] WDMAC_STATUS[ffffffff] At the time of tx timeout, the registers all return 0xffffffff. Does the subsequent reset bring the device back? If the device is brought back, there should be a link up message and traffic should resume. If not, please provide lspci -vvvxxx on the eth0 device after the failure. Also, when one ethernet port fails, does the other port (from the same dual port device) function ok? Thanks. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-16 21:23 ` Michael Chan @ 2009-03-16 22:46 ` Bernhard Schmidt 2009-03-17 22:09 ` Bernhard Schmidt 1 sibling, 0 replies; 16+ messages in thread From: Bernhard Schmidt @ 2009-03-16 22:46 UTC (permalink / raw) To: Michael Chan Cc: Andrew Morton, Matthew Carlson, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org On 16.03.2009 22:23, Michael Chan wrote: > On Sun, 2009-03-15 at 14:32 -0700, Andrew Morton wrote: >>> [784063.389142] tg3: eth0: transmit timed out, resetting >>> [784063.447106] tg3: DEBUG: MAC_TX_STATUS[ffffffff] MAC_RX_STATUS[ffffffff] >>> [784063.524104] tg3: DEBUG: RDMAC_STATUS[ffffffff] WDMAC_STATUS[ffffffff] > > At the time of tx timeout, the registers all return 0xffffffff. Does > the subsequent reset bring the device back? If the device is brought > back, there should be a link up message and traffic should resume. If > not, please provide lspci -vvvxxx on the eth0 device after the failure. The port does not pass traffic until I rmmod/modprobe the driver or reset the whole system, it doesn't recover by itself. "[784081.605984] tg3: eth0: Link is down." is the last message I see. I'll send you the lspci output as soon as it happens again. > Also, when one ethernet port fails, does the other port (from the same > dual port device) function ok? I'm not exactly sure about that, as nowadays there is nothing connected to it anymore. However, when the problem first occured there was, and I'm pretty sure the second port was okay. Bernhard ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-16 21:23 ` Michael Chan 2009-03-16 22:46 ` Bernhard Schmidt @ 2009-03-17 22:09 ` Bernhard Schmidt 2009-03-17 23:30 ` Michael Chan 2009-03-19 16:58 ` Matt Carlson 1 sibling, 2 replies; 16+ messages in thread From: Bernhard Schmidt @ 2009-03-17 22:09 UTC (permalink / raw) To: Michael Chan Cc: Andrew Morton, Matthew Carlson, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org [-- Attachment #1: Type: text/plain, Size: 2244 bytes --] On 16.03.2009 22:23, Michael Chan wrote: > On Sun, 2009-03-15 at 14:32 -0700, Andrew Morton wrote: >>> [784063.389142] tg3: eth0: transmit timed out, resetting >>> [784063.447106] tg3: DEBUG: MAC_TX_STATUS[ffffffff] MAC_RX_STATUS[ffffffff] >>> [784063.524104] tg3: DEBUG: RDMAC_STATUS[ffffffff] WDMAC_STATUS[ffffffff] > > At the time of tx timeout, the registers all return 0xffffffff. Does > the subsequent reset bring the device back? If the device is brought > back, there should be a link up message and traffic should resume. If > not, please provide lspci -vvvxxx on the eth0 device after the failure. Attached, both after the crash (tg3.crashed) and after I reloaded the module (tg3.reloaded). Additional info, ifdown/ifup does not fix the situation, both take pretty long # ifdown eth0 tg3: tg3_abort_hw timed out for eth0, TX_MODE_ENABLE will not clear MAC_TX_MODE=ffffffff # ifup eth0 tg3 0000:03:04.0: irq 1272 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready and it stays dead. # rmmod tg3 tg3 0000:03:04.1: PCI INT B disabled tg3 0000:03:04.0: PCI INT A disabled # modprobe tg3 tg3.c:v3.94 (August 14, 2008) tg3 0000:03:04.0: enabling device (0000 -> 0002) tg3 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 eth0: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:21:5a:99:0a:28 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76148000] dma_mask[40-bit] tg3 0000:03:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 eth1: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:21:5a:99:0a:29 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76148000] dma_mask[40-bit] # ifup eth0 ADDRCONF(NETDEV_UP): eth0: link is not ready device eth0 entered promiscuous mode tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready and I'm up and running again. > Also, when one ethernet port fails, does the other port (from the same > dual port device) function ok? Still no clue about that, I need to find someone who can connect something there. Bernhard [-- Attachment #2: tg3.crashed --] [-- Type: text/plain, Size: 51423 bytes --] 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01) Subsystem: Hewlett-Packard Company Device 31f9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> 00: 86 80 f0 29 46 01 90 20 01 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 f9 31 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 40: 01 90 d1 fe 00 00 00 00 01 40 d1 fe 00 00 00 00 50: 00 00 02 00 03 20 00 00 00 00 00 00 00 00 00 00 60: 01 00 00 e0 00 00 00 00 01 80 d1 fe 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 30 11 31 13 11 31 33 00 ff 03 00 00 00 0a 38 00 a0: 30 00 00 0c 00 00 00 c0 00 00 00 c0 00 00 00 c0 b0: 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 d0: 00 00 00 00 00 00 00 00 49 00 00 00 00 00 00 8c e0: 09 00 0c 91 64 c8 fc c0 43 44 0b 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 90 0f 01 00 00 00 00 00 00:01.0 PCI bridge: Intel Corporation 3200/3210 Chipset Host-Primary PCI Express Bridge (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=15, subordinate=1a, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Hewlett-Packard Company Device 31f9 Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4169 Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep- BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Capabilities: [140] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 f1 29 47 05 10 00 01 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 15 1a 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 88 00 00 00 00 00 00 00 ff 01 03 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 80: 01 90 03 c8 08 00 00 00 0d 80 00 00 3c 10 f9 31 90: 05 a0 01 00 0c 30 e0 fe 69 41 00 00 00 00 00 00 a0: 10 00 42 01 00 80 00 00 06 00 00 00 01 3d 21 02 b0: 40 00 01 10 00 00 04 00 00 00 00 00 0e 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 01 00 03 e1 3f 80 90 0f 01 00 00 f0 00 f0 00:06.0 PCI bridge: Intel Corporation 3210 Chipset Host-Secondary PCI Express Bridge (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=12, subordinate=14, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Hewlett-Packard Company Device 31f9 Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4171 Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep- BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Capabilities: [140] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 f9 29 47 05 10 00 01 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 12 14 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 88 00 00 00 00 00 00 00 ff 01 03 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 80: 01 90 03 c8 08 00 00 00 0d 80 00 00 3c 10 f9 31 90: 05 a0 01 00 0c 30 e0 fe 71 41 00 00 00 00 00 00 a0: 10 00 42 01 00 80 00 00 06 00 00 00 81 3c 21 03 b0: 40 00 01 10 00 00 04 00 00 00 00 00 0e 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 01 00 03 e1 3f 80 90 0f 01 00 00 00 00 00 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4179 Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 40 29 47 05 10 00 02 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 02 03 00 f0 00 00 20 20: f0 fd f0 fd f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 00 40: 10 80 41 00 00 80 00 00 06 00 10 00 21 4c 11 01 50: 00 00 21 30 60 00 00 00 00 00 48 01 0e 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 0c 30 e0 fe 79 41 00 00 00 00 00 00 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=06, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4181 Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 44 29 47 05 10 00 02 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 04 06 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 03 03 00 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 03 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 0c 30 e0 fe 81 41 00 00 00 00 00 00 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=09, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4189 Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 46 29 47 05 10 00 02 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 07 09 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 04 03 00 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 04 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 0c 30 e0 fe 89 41 00 00 00 00 00 00 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4191 Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 48 29 47 05 10 00 02 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 0a 0c 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 00 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 05 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 0c 30 e0 fe 91 41 00 00 00 00 00 00 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0d, subordinate=11, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4199 Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 4a 29 47 05 10 00 02 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 0d 11 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 02 03 00 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 06 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 0c 30 e0 fe 99 41 00 00 00 00 00 00 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at 1000 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 34 29 05 00 90 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1020 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 35 29 05 00 90 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 21 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at 1040 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 36 29 05 00 90 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 21 Region 4: I/O ports at 1060 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 39 29 05 00 90 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 61 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at fdcf0000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00: 86 80 3a 29 46 01 90 02 02 20 03 0c 00 00 00 00 10: 00 00 cf fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 c2 c9 00 00 00 00 0a 98 a0 20 00 00 00 00 60: 20 20 ff 01 00 00 00 00 01 00 00 01 00 00 08 c0 70: 00 00 cf 3f 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 88 85 40 00 86 0f 02 00 06 17 02 20 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00002000-00003fff Memory behind bridge: fdd00000-fdefffff Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Hewlett-Packard Company Device 31fe 00: 86 80 4e 24 47 01 10 00 92 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 40 20 30 80 22 20: d0 fd e0 fd 01 d8 f1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 0b 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 12 00 00 50: 0d 00 00 00 3c 10 fe 31 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> 00: 86 80 16 29 47 01 10 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 40: 01 09 00 00 80 00 00 00 01 08 00 00 10 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 8b 8a 80 80 d0 00 00 00 87 85 8a 8b f8 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 09 34 01 03 0c 00 01 06 7c 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 02 00 00 08 02 00 00 13 00 00 00 00 03 00 00 b0: 00 00 f0 00 00 00 00 00 00 40 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 67 45 00 00 cf ff 00 00 01 00 00 00 e0: 09 00 0c 10 00 00 c4 02 60 00 00 00 00 00 00 00 f0: 01 c0 d1 fe 44 f2 0e 00 86 0f 02 00 00 00 00 00 00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at 1080 [size=8] Region 1: I/O ports at 1088 [size=4] Region 2: I/O ports at 1090 [size=8] Region 3: I/O ports at 1098 [size=4] Region 4: I/O ports at 10a0 [size=16] Region 5: I/O ports at 10b0 [size=16] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] PCIe advanced features <?> Kernel driver in use: ata_piix Kernel modules: ide-pci-generic, ata_generic, ata_piix 00: 86 80 20 29 47 00 b0 02 02 8f 01 01 00 00 00 00 10: 81 10 00 00 89 10 00 00 91 10 00 00 99 10 00 00 20: a1 10 00 00 b1 10 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 70 00 00 00 00 00 00 00 07 02 00 00 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 b0 03 00 08 00 00 00 00 00 00 00 00 00 00 00 80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 0f 03 80 01 80 00 00 00 00 00 00 00 00 00 a0: ac 00 00 00 0a 00 12 00 00 00 00 00 00 00 00 00 b0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at 10c0 [size=8] Region 1: I/O ports at 10c8 [size=4] Region 2: I/O ports at 10d0 [size=8] Region 3: I/O ports at 10d8 [size=4] Region 4: I/O ports at 10e0 [size=16] Region 5: I/O ports at 10f0 [size=16] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] PCIe advanced features <?> Kernel driver in use: ata_piix Kernel modules: ide-pci-generic, ata_generic, ata_piix 00: 86 80 26 29 47 00 b0 02 02 85 01 01 00 00 00 00 10: c1 10 00 00 c9 10 00 00 d1 10 00 00 d9 10 00 00 20: e1 10 00 00 f1 10 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 70 00 00 00 00 00 00 00 07 02 00 00 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 b0 03 00 08 00 00 00 00 00 00 00 00 00 00 00 80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 03 01 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 01:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 31fb Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at fdef0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at fdd00000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 5e 51 87 01 90 02 02 00 00 03 10 40 00 00 10: 08 00 00 d8 01 30 00 00 00 00 ef fd 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fb 31 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 08 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fb 31 50: 01 00 02 06 00 00 00 00 02 50 20 00 00 02 00 2f 60: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03) Subsystem: Hewlett-Packard Company Device 3305 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at 2800 [size=256] Region 1: Memory at fdee0000 (32-bit, non-prefetchable) [size=512] Capabilities: [f0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: hpwdt Kernel modules: hpwdt 00: 11 0e 03 b2 03 01 90 02 03 00 80 08 00 00 80 00 10: 01 28 00 00 00 00 ee fd 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0a 01 00 00 40: 67 fd 00 00 11 00 00 00 00 00 00 00 06 02 06 02 50: 00 00 00 00 00 00 00 00 ef 39 fd 77 01 00 00 5a 60: 00 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 06 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 1a 00 88 03 43 50 51 00 90: 30 00 00 00 02 00 00 5f 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 02 00 00 00 00 00 04 04 c1 02 b0: 00 0a 00 00 00 00 00 00 b7 01 10 51 84 00 03 09 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 00 00 00 00 00 00 00 01 00 00 00 00 13 21 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 03) Subsystem: Hewlett-Packard Company Device 3305 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 23 BIST result: 00 Region 0: I/O ports at 3400 [size=256] Region 1: Memory at fded0000 (32-bit, non-prefetchable) [size=2K] Region 2: Memory at fdec0000 (32-bit, non-prefetchable) [size=16K] Region 3: Memory at fde00000 (32-bit, non-prefetchable) [size=512K] [virtual] Expansion ROM at fdd20000 [disabled] [size=64K] Capabilities: [f0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: hpilo Kernel modules: hpilo 00: 11 0e 04 b2 17 01 90 02 03 00 80 08 10 40 80 80 10: 01 34 00 00 00 00 ed fd 00 00 ec fd 00 00 e0 fd 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0b 02 00 00 40: 04 0d 00 00 00 00 00 00 00 00 00 00 0a 01 15 12 50: 03 e0 ff 00 05 00 40 00 04 00 00 00 00 00 e0 00 60: 00 00 00 00 00 00 00 00 8b 60 56 05 59 28 82 f8 70: 00 08 00 01 03 03 c0 00 00 00 00 00 00 00 00 00 80: fe 01 00 00 62 6a 06 00 6b 63 9b 14 88 48 00 00 90: 00 00 00 00 03 03 00 00 00 00 00 00 00 00 00 00 a0: 14 03 02 00 80 00 00 00 20 00 00 00 00 00 00 00 b0: 10 00 00 00 00 00 e7 81 ff fd 0e 0d 00 00 00 00 c0: a3 0c 00 00 00 00 07 00 a5 0c 00 00 00 c0 07 00 d0: 00 00 00 00 00 00 00 00 9a 17 00 00 00 00 00 00 e0: 00 00 00 00 0b 00 00 00 00 00 00 00 0b 00 00 00 f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB controller (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 3305 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin B routed to IRQ 23 Region 4: I/O ports at 3800 [size=32] Capabilities: [f0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 3c 10 00 33 45 01 90 02 00 00 03 0c 00 40 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 38 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0b 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual UART (prog-if 01) Subsystem: Hewlett-Packard Company Device 3305 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 22 Region 0: Memory at fddf0000 (32-bit, non-prefetchable) [size=256] Capabilities: [f0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ipmi_si Kernel modules: ipmi_si 00: 3c 10 02 33 02 00 90 02 00 01 07 0c 00 00 80 00 10: 00 00 df fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [60] Express (v1) PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <4us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [90] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Advanced Error Reporting <?> Capabilities: [14c] Power Budgeting <?> Kernel modules: shpchp 00: 66 11 03 01 47 01 10 00 b5 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 02 03 03 40 f1 01 00 22 20: f0 fd f0 fd f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 60 00 00 00 00 00 00 00 60 00 03 00 40: 00 00 00 00 00 00 00 01 00 00 0c 20 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 c0 60: 10 90 71 00 a0 09 00 00 06 00 10 00 41 6c 01 00 70: 00 00 21 10 44 08 00 00 00 00 00 00 00 00 00 00 80: 01 00 00 00 20 20 30 2b 92 08 18 20 02 60 00 fb 90: 07 b0 c3 00 00 02 00 00 00 00 00 00 00 00 00 00 a0: 90 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet (rev a3) Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 1272 Region 0: Memory at fdff0000 (64-bit, non-prefetchable) [disabled] [size=64K] Region 2: Memory at fdfe0000 (64-bit, non-prefetchable) [disabled] [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=1 Status: Dev=03:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data <?> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+ Address: 00000000fee0300c Data: 41d1 Kernel driver in use: tg3 Kernel modules: tg3 00: e4 14 78 16 00 00 b0 02 a3 00 00 02 10 40 80 00 10: 04 00 ff fd 00 00 00 00 04 00 fe fd 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 3e 70 30: 00 00 e3 82 40 00 00 00 00 00 00 00 0b 01 40 00 40: 07 48 00 00 20 03 43 04 01 50 02 c0 00 21 00 64 50: 03 58 04 00 3f 61 00 10 05 00 87 00 0c 30 e0 fe 60: 00 00 00 00 d1 41 00 00 9a 02 03 90 00 00 00 00 70: 6a 10 00 00 c7 00 00 00 50 00 00 00 00 00 00 00 80: 03 58 04 00 40 00 00 40 00 00 01 00 fe d0 08 00 90: 01 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet (rev a3) Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fdfd0000 (64-bit, non-prefetchable) [size=64K] Region 2: Memory at fdfc0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=1 Status: Dev=03:04.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data <?> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable- Address: 00000000fee0300c Data: 41c9 Kernel driver in use: tg3 Kernel modules: tg3 00: e4 14 78 16 46 01 b0 02 a3 00 00 02 10 40 80 00 10: 04 00 fd fd 00 00 00 00 04 00 fc fd 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 3e 70 30: 00 00 6f ba 40 00 00 00 00 00 00 00 0a 02 40 00 40: 07 48 00 00 21 03 43 04 01 50 02 c0 00 20 00 64 50: 03 58 e8 00 6b ee 9b 7d 05 00 86 00 0c 30 e0 fe 60: 00 00 00 00 c9 41 00 00 9a 02 03 90 00 80 14 76 70: ea 10 00 00 c7 00 00 00 14 04 00 00 00 00 00 00 80: 29 0a 99 5a 2a 00 00 00 34 00 00 00 fe d0 08 04 90: 01 07 00 09 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [-- Attachment #3: tg3.reloaded --] [-- Type: text/plain, Size: 51455 bytes --] 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01) Subsystem: Hewlett-Packard Company Device 31f9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> 00: 86 80 f0 29 46 01 90 20 01 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 f9 31 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 40: 01 90 d1 fe 00 00 00 00 01 40 d1 fe 00 00 00 00 50: 00 00 02 00 03 20 00 00 00 00 00 00 00 00 00 00 60: 01 00 00 e0 00 00 00 00 01 80 d1 fe 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 30 11 31 13 11 31 33 00 ff 03 00 00 00 0a 38 00 a0: 30 00 00 0c 00 00 00 c0 00 00 00 c0 00 00 00 c0 b0: 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 d0: 00 00 00 00 00 00 00 00 49 00 00 00 00 00 00 8c e0: 09 00 0c 91 64 c8 fc c0 43 44 0b 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 90 0f 01 00 00 00 00 00 00:01.0 PCI bridge: Intel Corporation 3200/3210 Chipset Host-Primary PCI Express Bridge (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=15, subordinate=1a, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Hewlett-Packard Company Device 31f9 Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4169 Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep- BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Capabilities: [140] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 f1 29 47 05 10 00 01 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 15 1a 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 88 00 00 00 00 00 00 00 ff 01 03 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 80: 01 90 03 c8 08 00 00 00 0d 80 00 00 3c 10 f9 31 90: 05 a0 01 00 0c 30 e0 fe 69 41 00 00 00 00 00 00 a0: 10 00 42 01 00 80 00 00 06 00 00 00 01 3d 21 02 b0: 40 00 01 10 00 00 04 00 00 00 00 00 0e 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 01 00 03 e1 3f 80 90 0f 01 00 00 f0 00 f0 00:06.0 PCI bridge: Intel Corporation 3210 Chipset Host-Secondary PCI Express Bridge (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=12, subordinate=14, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Hewlett-Packard Company Device 31f9 Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4171 Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep- BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Capabilities: [140] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 f9 29 47 05 10 00 01 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 12 14 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 88 00 00 00 00 00 00 00 ff 01 03 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 80: 01 90 03 c8 08 00 00 00 0d 80 00 00 3c 10 f9 31 90: 05 a0 01 00 0c 30 e0 fe 71 41 00 00 00 00 00 00 a0: 10 00 42 01 00 80 00 00 06 00 00 00 81 3c 21 03 b0: 40 00 01 10 00 00 04 00 00 00 00 00 0e 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 01 00 03 e1 3f 80 90 0f 01 00 00 00 00 00 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4179 Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 40 29 47 05 10 00 02 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 02 03 00 f0 00 00 20 20: f0 fd f0 fd f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 00 40: 10 80 41 00 00 80 00 00 06 00 10 00 21 4c 11 01 50: 00 00 21 30 60 00 00 00 00 00 48 01 0e 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 0c 30 e0 fe 79 41 00 00 00 00 00 00 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=06, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4181 Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 44 29 47 05 10 00 02 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 04 06 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 03 03 00 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 03 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 0c 30 e0 fe 81 41 00 00 00 00 00 00 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=09, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4189 Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 46 29 47 05 10 00 02 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 07 09 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 04 03 00 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 04 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 0c 30 e0 fe 89 41 00 00 00 00 00 00 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4191 Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 48 29 47 05 10 00 02 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 0a 0c 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 00 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 05 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 0c 30 e0 fe 91 41 00 00 00 00 00 00 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0d, subordinate=11, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4199 Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 4a 29 47 05 10 00 02 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 0d 11 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 02 03 00 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 06 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 0c 30 e0 fe 99 41 00 00 00 00 00 00 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at 1000 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 34 29 05 00 90 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1020 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 35 29 05 00 90 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 21 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at 1040 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 36 29 05 00 90 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 21 Region 4: I/O ports at 1060 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 39 29 05 00 90 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 61 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at fdcf0000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00: 86 80 3a 29 46 01 90 02 02 20 03 0c 00 00 00 00 10: 00 00 cf fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 c2 c9 00 00 00 00 0a 98 a0 20 00 00 00 00 60: 20 20 ff 01 00 00 00 00 01 00 00 01 00 00 08 c0 70: 00 00 cf 3f 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 88 85 40 00 86 0f 02 00 06 17 02 20 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00002000-00003fff Memory behind bridge: fdd00000-fdefffff Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Hewlett-Packard Company Device 31fe 00: 86 80 4e 24 47 01 10 00 92 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 40 20 30 80 22 20: d0 fd e0 fd 01 d8 f1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 0b 00 40: 00 00 00 00 00 00 00 00 01 00 00 00 00 12 00 00 50: 0d 00 00 00 3c 10 fe 31 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> 00: 86 80 16 29 47 01 10 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 40: 01 09 00 00 80 00 00 00 01 08 00 00 10 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 8b 8a 80 80 d0 00 00 00 87 85 8a 8b f8 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 09 34 01 03 0c 00 01 06 7c 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 02 00 00 08 02 00 00 13 00 00 00 00 03 00 00 b0: 00 00 f0 00 00 00 00 00 00 40 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 67 45 00 00 cf ff 00 00 01 00 00 00 e0: 09 00 0c 10 00 00 c4 02 60 00 00 00 00 00 00 00 f0: 01 c0 d1 fe 44 f2 0e 00 86 0f 02 00 00 00 00 00 00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at 1080 [size=8] Region 1: I/O ports at 1088 [size=4] Region 2: I/O ports at 1090 [size=8] Region 3: I/O ports at 1098 [size=4] Region 4: I/O ports at 10a0 [size=16] Region 5: I/O ports at 10b0 [size=16] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] PCIe advanced features <?> Kernel driver in use: ata_piix Kernel modules: ide-pci-generic, ata_generic, ata_piix 00: 86 80 20 29 47 00 b0 02 02 8f 01 01 00 00 00 00 10: 81 10 00 00 89 10 00 00 91 10 00 00 99 10 00 00 20: a1 10 00 00 b1 10 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 70 00 00 00 00 00 00 00 07 02 00 00 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 b0 03 00 08 00 00 00 00 00 00 00 00 00 00 00 80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 0f 03 80 01 80 00 00 00 00 00 00 00 00 00 a0: ac 00 00 00 0a 00 12 00 00 00 00 00 00 00 00 00 b0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Hewlett-Packard Company Device 31fe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at 10c0 [size=8] Region 1: I/O ports at 10c8 [size=4] Region 2: I/O ports at 10d0 [size=8] Region 3: I/O ports at 10d8 [size=4] Region 4: I/O ports at 10e0 [size=16] Region 5: I/O ports at 10f0 [size=16] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] PCIe advanced features <?> Kernel driver in use: ata_piix Kernel modules: ide-pci-generic, ata_generic, ata_piix 00: 86 80 26 29 47 00 b0 02 02 85 01 01 00 00 00 00 10: c1 10 00 00 c9 10 00 00 d1 10 00 00 d9 10 00 00 20: e1 10 00 00 f1 10 00 00 00 00 00 00 3c 10 fe 31 30: 00 00 00 00 70 00 00 00 00 00 00 00 07 02 00 00 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 b0 03 00 08 00 00 00 00 00 00 00 00 00 00 00 80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 03 01 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 01:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 31fb Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at fdef0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at fdd00000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 5e 51 87 01 90 02 02 00 00 03 10 40 00 00 10: 08 00 00 d8 01 30 00 00 00 00 ef fd 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fb 31 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 08 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fb 31 50: 01 00 02 06 00 00 00 00 02 50 20 00 00 02 00 2f 60: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03) Subsystem: Hewlett-Packard Company Device 3305 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at 2800 [size=256] Region 1: Memory at fdee0000 (32-bit, non-prefetchable) [size=512] Capabilities: [f0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: hpwdt Kernel modules: hpwdt 00: 11 0e 03 b2 03 01 90 02 03 00 80 08 00 00 80 00 10: 01 28 00 00 00 00 ee fd 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0a 01 00 00 40: 67 fd 00 00 11 00 00 00 00 00 00 00 06 02 06 02 50: 00 00 00 00 00 00 00 00 fa 39 fd 77 01 00 00 5a 60: 00 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 06 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 1a 00 88 03 43 50 51 00 90: 30 00 00 00 02 00 00 5f 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 02 00 00 00 00 00 04 04 c1 02 b0: 00 0a 00 00 00 00 00 00 b7 01 10 51 84 00 03 09 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 00 00 00 00 00 00 00 01 00 00 00 00 13 21 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 03) Subsystem: Hewlett-Packard Company Device 3305 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 23 BIST result: 00 Region 0: I/O ports at 3400 [size=256] Region 1: Memory at fded0000 (32-bit, non-prefetchable) [size=2K] Region 2: Memory at fdec0000 (32-bit, non-prefetchable) [size=16K] Region 3: Memory at fde00000 (32-bit, non-prefetchable) [size=512K] [virtual] Expansion ROM at fdd20000 [disabled] [size=64K] Capabilities: [f0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: hpilo Kernel modules: hpilo 00: 11 0e 04 b2 17 01 90 02 03 00 80 08 10 40 80 80 10: 01 34 00 00 00 00 ed fd 00 00 ec fd 00 00 e0 fd 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0b 02 00 00 40: 04 0d 00 00 00 00 00 00 00 00 00 00 0a 01 15 12 50: 03 e0 ff 00 05 00 40 00 04 00 00 00 00 00 e0 00 60: 00 00 00 00 00 00 00 00 8b 60 56 05 59 28 82 f8 70: 00 08 00 01 03 03 c0 00 00 00 00 00 00 00 00 00 80: bb 03 00 00 57 39 06 00 73 08 4c c5 8e 48 00 00 90: 00 00 00 00 03 03 00 00 00 00 00 00 00 00 00 00 a0: 14 03 02 00 80 00 00 00 20 00 00 00 00 00 00 00 b0: 10 00 00 00 00 00 e7 81 ff fd 0e 0d 00 00 00 00 c0: a3 0c 00 00 00 00 07 00 a5 0c 00 00 00 c0 07 00 d0: 00 00 00 00 00 00 00 00 9a 17 00 00 00 00 00 00 e0: 00 00 00 00 0b 00 00 00 00 00 00 00 0b 00 00 00 f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB controller (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device 3305 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin B routed to IRQ 23 Region 4: I/O ports at 3800 [size=32] Capabilities: [f0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 3c 10 00 33 45 01 90 02 00 00 03 0c 00 40 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 38 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0b 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual UART (prog-if 01) Subsystem: Hewlett-Packard Company Device 3305 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 22 Region 0: Memory at fddf0000 (32-bit, non-prefetchable) [size=256] Capabilities: [f0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ipmi_si Kernel modules: ipmi_si 00: 3c 10 02 33 02 00 90 02 00 01 07 0c 00 00 80 00 10: 00 00 df fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [60] Express (v1) PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <4us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [90] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Advanced Error Reporting <?> Capabilities: [14c] Power Budgeting <?> Kernel modules: shpchp 00: 66 11 03 01 47 01 10 00 b5 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 02 03 03 40 f1 01 00 22 20: f0 fd f0 fd f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 60 00 00 00 00 00 00 00 60 00 03 00 40: 00 00 00 00 00 00 00 01 00 00 0c 20 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 c0 60: 10 90 71 00 a0 09 00 00 06 00 10 00 41 6c 01 00 70: 00 00 21 10 44 08 00 00 00 00 00 00 00 00 00 00 80: 01 00 00 00 20 20 30 2b 92 08 18 20 02 60 00 fb 90: 07 b0 c3 00 00 02 00 00 00 00 00 00 00 00 00 00 a0: 90 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet (rev a3) Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1272 Region 0: Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Region 2: Memory at fdfe0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=1 Status: Dev=03:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data <?> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+ Address: 00000000fee0300c Data: 41e1 Kernel driver in use: tg3 Kernel modules: tg3 00: e4 14 78 16 06 00 b0 02 a3 00 00 02 10 40 80 00 10: 04 00 ff fd 00 00 00 00 04 00 fe fd 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 3e 70 30: 00 00 e3 82 40 00 00 00 00 00 00 00 0b 01 40 00 40: 07 48 00 00 20 03 43 04 01 50 02 c0 00 21 00 64 50: 03 58 04 00 3f 61 00 10 05 00 87 00 0c 30 e0 fe 60: 00 00 00 00 e1 41 00 00 98 02 03 90 00 80 14 76 70: ea 10 00 00 c7 00 00 00 50 00 00 00 00 00 00 00 80: 03 58 04 00 d0 00 00 c0 34 00 13 04 82 d0 08 04 90: 09 97 00 01 00 00 00 00 00 00 00 00 bf 00 00 00 a0: 00 00 00 00 f7 01 00 00 00 00 00 00 a2 00 00 00 b0: 00 00 00 00 00 00 00 65 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet (rev a3) Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fdfd0000 (64-bit, non-prefetchable) [size=64K] Region 2: Memory at fdfc0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=1 Status: Dev=03:04.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data <?> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable- Address: 00000000fee0300c Data: 41c9 Kernel driver in use: tg3 Kernel modules: tg3 00: e4 14 78 16 46 01 b0 02 a3 00 00 02 10 40 80 00 10: 04 00 fd fd 00 00 00 00 04 00 fc fd 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 3e 70 30: 00 00 6f ba 40 00 00 00 00 00 00 00 0a 02 40 00 40: 07 48 00 00 21 03 43 04 01 50 02 c0 00 20 00 64 50: 03 58 e8 00 6b ee 9b 7d 05 00 86 00 0c 30 e0 fe 60: 00 00 00 00 c9 41 00 00 9a 02 03 90 00 80 14 76 70: ea 10 00 00 c7 00 00 00 14 04 00 00 00 00 00 00 80: 29 0a 99 5a 2a 00 00 00 34 00 00 00 fe d0 08 04 90: 01 07 00 09 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-17 22:09 ` Bernhard Schmidt @ 2009-03-17 23:30 ` Michael Chan 2009-03-19 16:58 ` Matt Carlson 1 sibling, 0 replies; 16+ messages in thread From: Michael Chan @ 2009-03-17 23:30 UTC (permalink / raw) To: Bernhard Schmidt Cc: Andrew Morton, Matthew Carlson, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org On Tue, 2009-03-17 at 15:09 -0700, Bernhard Schmidt wrote: > Attached, both after the crash (tg3.crashed) and after I reloaded the > module (tg3.reloaded). Additional info, ifdown/ifup does not fix the > situation, both take pretty long > Thanks for the information. The memory enable bit in the PCI command register was cleared during tx_timeout. That's why all the registers were reading 0xffffffff. The tx_timeout code in tg3 would not be able to reset the chip if that bit was cleared. We need to find out why that bit was cleared. We should also enhance the tx timeout code so that it can recover more completely even if the memory enable bit is cleared. Thanks. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-17 22:09 ` Bernhard Schmidt 2009-03-17 23:30 ` Michael Chan @ 2009-03-19 16:58 ` Matt Carlson 2009-03-19 18:06 ` Bernhard Schmidt 2009-03-22 13:21 ` Bernhard Schmidt 1 sibling, 2 replies; 16+ messages in thread From: Matt Carlson @ 2009-03-19 16:58 UTC (permalink / raw) To: Bernhard Schmidt Cc: Michael Chan, Andrew Morton, Matthew Carlson, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org Hi Bernhard. I talked to Michael about this and we'd like you to try two things. 1) Can you disable iLo2 and see if you can still reproduce the problem? 2) Can you apply the following patch to get more information on when MMIO gets disabled? diff -Nrup 1/drivers/net/tg3.c 2/drivers/net/tg3.c --- 1/drivers/net/tg3.c 2009-02-20 14:41:27.000000000 -0800 +++ 2/drivers/net/tg3.c 2009-03-19 09:51:17.000000000 -0700 @@ -7799,6 +7799,12 @@ static void tg3_timer(unsigned long __op /* This part only runs once per second. */ if (!--tp->timer_counter) { + u16 pci_cmd; + + pci_read_config_word(tp->pdev, PCI_COMMAND, &pci_cmd); + if (!(pci_cmd & PCI_COMMAND_MEMORY)) + printk( KERN_WARNING "PCI Memory Mapped IO Disabled!!!!\n" ); + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) tg3_periodic_fetch_stats(tp); On Tue, Mar 17, 2009 at 03:09:03PM -0700, Bernhard Schmidt wrote: > On 16.03.2009 22:23, Michael Chan wrote: > > On Sun, 2009-03-15 at 14:32 -0700, Andrew Morton wrote: > >>> [784063.389142] tg3: eth0: transmit timed out, resetting > >>> [784063.447106] tg3: DEBUG: MAC_TX_STATUS[ffffffff] MAC_RX_STATUS[ffffffff] > >>> [784063.524104] tg3: DEBUG: RDMAC_STATUS[ffffffff] WDMAC_STATUS[ffffffff] > > > > At the time of tx timeout, the registers all return 0xffffffff. Does > > the subsequent reset bring the device back? If the device is brought > > back, there should be a link up message and traffic should resume. If > > not, please provide lspci -vvvxxx on the eth0 device after the failure. > > Attached, both after the crash (tg3.crashed) and after I reloaded the > module (tg3.reloaded). Additional info, ifdown/ifup does not fix the > situation, both take pretty long > > # ifdown eth0 > tg3: tg3_abort_hw timed out for eth0, TX_MODE_ENABLE will not clear > MAC_TX_MODE=ffffffff > # ifup eth0 > tg3 0000:03:04.0: irq 1272 for MSI/MSI-X > ADDRCONF(NETDEV_UP): eth0: link is not ready > > and it stays dead. > > # rmmod tg3 > tg3 0000:03:04.1: PCI INT B disabled > tg3 0000:03:04.0: PCI INT A disabled > # modprobe tg3 > tg3.c:v3.94 (August 14, 2008) > tg3 0000:03:04.0: enabling device (0000 -> 0002) > tg3 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > eth0: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) > 10/100/1000Base-T Ethernet 00:21:5a:99:0a:28 > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] > eth0: dma_rwctrl[76148000] dma_mask[40-bit] > tg3 0000:03:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > eth1: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) > 10/100/1000Base-T Ethernet 00:21:5a:99:0a:29 > eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] > eth1: dma_rwctrl[76148000] dma_mask[40-bit] > # ifup eth0 > ADDRCONF(NETDEV_UP): eth0: link is not ready > device eth0 entered promiscuous mode > tg3: eth0: Link is up at 100 Mbps, full duplex. > tg3: eth0: Flow control is off for TX and off for RX. > ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > and I'm up and running again. > > > Also, when one ethernet port fails, does the other port (from the same > > dual port device) function ok? > > Still no clue about that, I need to find someone who can connect > something there. > > Bernhard Content-Description: tg3.crashed > 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01) > Subsystem: Hewlett-Packard Company Device 31f9 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information <?> > 00: 86 80 f0 29 46 01 90 20 01 00 00 06 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 f9 31 > 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 > 40: 01 90 d1 fe 00 00 00 00 01 40 d1 fe 00 00 00 00 > 50: 00 00 02 00 03 20 00 00 00 00 00 00 00 00 00 00 > 60: 01 00 00 e0 00 00 00 00 01 80 d1 fe 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 30 11 31 13 11 31 33 00 ff 03 00 00 00 0a 38 00 > a0: 30 00 00 0c 00 00 00 c0 00 00 00 c0 00 00 00 c0 > b0: 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 > d0: 00 00 00 00 00 00 00 00 49 00 00 00 00 00 00 8c > e0: 09 00 0c 91 64 c8 fc c0 43 44 0b 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 90 0f 01 00 00 00 00 00 > > 00:01.0 PCI bridge: Intel Corporation 3200/3210 Chipset Host-Primary PCI Express Bridge (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=15, subordinate=1a, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [88] Subsystem: Hewlett-Packard Company Device 31f9 > Capabilities: [80] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4169 > Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Suprise- LLActRep- BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [100] Virtual Channel <?> > Capabilities: [140] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 f1 29 47 05 10 00 01 00 04 06 10 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 15 1a 00 f0 00 00 00 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 88 00 00 00 00 00 00 00 ff 01 03 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 > 80: 01 90 03 c8 08 00 00 00 0d 80 00 00 3c 10 f9 31 > 90: 05 a0 01 00 0c 30 e0 fe 69 41 00 00 00 00 00 00 > a0: 10 00 42 01 00 80 00 00 06 00 00 00 01 3d 21 02 > b0: 40 00 01 10 00 00 04 00 00 00 00 00 0e 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 01 00 03 e1 3f 80 90 0f 01 00 00 f0 00 f0 > > 00:06.0 PCI bridge: Intel Corporation 3210 Chipset Host-Secondary PCI Express Bridge (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=12, subordinate=14, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [88] Subsystem: Hewlett-Packard Company Device 31f9 > Capabilities: [80] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4171 > Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #3, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Suprise- LLActRep- BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [100] Virtual Channel <?> > Capabilities: [140] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 f9 29 47 05 10 00 01 00 04 06 10 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 12 14 00 f0 00 00 00 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 88 00 00 00 00 00 00 00 ff 01 03 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 > 80: 01 90 03 c8 08 00 00 00 0d 80 00 00 3c 10 f9 31 > 90: 05 a0 01 00 0c 30 e0 fe 71 41 00 00 00 00 00 00 > a0: 10 00 42 01 00 80 00 00 06 00 00 00 81 3c 21 03 > b0: 40 00 01 10 00 00 04 00 00 00 00 00 0e 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 01 00 03 e1 3f 80 90 0f 01 00 00 00 00 00 > > 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fdf00000-fdffffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <1us, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4179 > Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel <?> > Capabilities: [180] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 40 29 47 05 10 00 02 00 04 06 10 00 81 00 > 10: 00 00 00 00 00 00 00 00 00 02 03 00 f0 00 00 20 > 20: f0 fd f0 fd f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 00 > 40: 10 80 41 00 00 80 00 00 06 00 10 00 21 4c 11 01 > 50: 00 00 21 30 60 00 00 00 00 00 48 01 0e 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 90 01 00 0c 30 e0 fe 79 41 00 00 00 00 00 00 > 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 > e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=04, subordinate=06, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4181 > Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel <?> > Capabilities: [180] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 44 29 47 05 10 00 02 00 04 06 10 00 81 00 > 10: 00 00 00 00 00 00 00 00 00 04 06 00 f0 00 00 20 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 03 03 00 > 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 03 > 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 90 01 00 0c 30 e0 fe 81 41 00 00 00 00 00 00 > 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 > e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=07, subordinate=09, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4189 > Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel <?> > Capabilities: [180] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 46 29 47 05 10 00 02 00 04 06 10 00 81 00 > 10: 00 00 00 00 00 00 00 00 00 07 09 00 f0 00 00 20 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 04 03 00 > 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 04 > 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 90 01 00 0c 30 e0 fe 89 41 00 00 00 00 00 00 > 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 > e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4191 > Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel <?> > Capabilities: [180] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 48 29 47 05 10 00 02 00 04 06 10 00 81 00 > 10: 00 00 00 00 00 00 00 00 00 0a 0c 00 f0 00 00 20 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 00 > 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 05 > 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 90 01 00 0c 30 e0 fe 91 41 00 00 00 00 00 00 > 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 > e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=0d, subordinate=11, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4199 > Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel <?> > Capabilities: [180] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 4a 29 47 05 10 00 02 00 04 06 10 00 81 00 > 10: 00 00 00 00 00 00 00 00 00 0d 11 00 f0 00 00 20 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 02 03 00 > 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 06 > 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 90 01 00 0c 30 e0 fe 99 41 00 00 00 00 00 00 > 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 > e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 21 > Region 4: I/O ports at 1000 [size=32] > Capabilities: [50] PCIe advanced features <?> > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00: 86 80 34 29 05 00 90 02 02 00 03 0c 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 01 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 21 > Region 4: I/O ports at 1020 [size=32] > Capabilities: [50] PCIe advanced features <?> > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00: 86 80 35 29 05 00 90 02 02 00 03 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 21 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 02 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 21 > Region 4: I/O ports at 1040 [size=32] > Capabilities: [50] PCIe advanced features <?> > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00: 86 80 36 29 05 00 90 02 02 00 03 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 41 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 03 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin D routed to IRQ 21 > Region 4: I/O ports at 1060 [size=32] > Capabilities: [50] PCIe advanced features <?> > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00: 86 80 39 29 05 00 90 02 02 00 03 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 61 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 21 > Region 0: Memory at fdcf0000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Capabilities: [98] PCIe advanced features <?> > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > 00: 86 80 3a 29 46 01 90 02 02 20 03 0c 00 00 00 00 > 10: 00 00 cf fd 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 01 58 c2 c9 00 00 00 00 0a 98 a0 20 00 00 00 00 > 60: 20 20 ff 01 00 00 00 00 01 00 00 01 00 00 08 c0 > 70: 00 00 cf 3f 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 88 85 40 00 86 0f 02 00 06 17 02 20 > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 00002000-00003fff > Memory behind bridge: fdd00000-fdefffff > Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Subsystem: Hewlett-Packard Company Device 31fe > 00: 86 80 4e 24 47 01 10 00 92 01 04 06 00 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 01 01 40 20 30 80 22 > 20: d0 fd e0 fd 01 d8 f1 df 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 0b 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 12 00 00 > 50: 0d 00 00 00 3c 10 fe 31 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information <?> > 00: 86 80 16 29 47 01 10 02 02 00 01 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 > 40: 01 09 00 00 80 00 00 00 01 08 00 00 10 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 8b 8a 80 80 d0 00 00 00 87 85 8a 8b f8 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 09 34 01 03 0c 00 01 06 7c 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 02 00 00 08 02 00 00 13 00 00 00 00 03 00 00 > b0: 00 00 f0 00 00 00 00 00 00 40 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 67 45 00 00 cf ff 00 00 01 00 00 00 > e0: 09 00 0c 10 00 00 c4 02 60 00 00 00 00 00 00 00 > f0: 01 c0 d1 fe 44 f2 0e 00 86 0f 02 00 00 00 00 00 > > 00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 20 > Region 0: I/O ports at 1080 [size=8] > Region 1: I/O ports at 1088 [size=4] > Region 2: I/O ports at 1090 [size=8] > Region 3: I/O ports at 1098 [size=4] > Region 4: I/O ports at 10a0 [size=16] > Region 5: I/O ports at 10b0 [size=16] > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] PCIe advanced features <?> > Kernel driver in use: ata_piix > Kernel modules: ide-pci-generic, ata_generic, ata_piix > 00: 86 80 20 29 47 00 b0 02 02 8f 01 01 00 00 00 00 > 10: 81 10 00 00 89 10 00 00 91 10 00 00 99 10 00 00 > 20: a1 10 00 00 b1 10 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 70 00 00 00 00 00 00 00 07 02 00 00 > 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 01 b0 03 00 08 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 0f 03 80 01 80 00 00 00 00 00 00 00 00 00 > a0: ac 00 00 00 0a 00 12 00 00 00 00 00 00 00 00 00 > b0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 20 > Region 0: I/O ports at 10c0 [size=8] > Region 1: I/O ports at 10c8 [size=4] > Region 2: I/O ports at 10d0 [size=8] > Region 3: I/O ports at 10d8 [size=4] > Region 4: I/O ports at 10e0 [size=16] > Region 5: I/O ports at 10f0 [size=16] > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] PCIe advanced features <?> > Kernel driver in use: ata_piix > Kernel modules: ide-pci-generic, ata_generic, ata_piix > 00: 86 80 26 29 47 00 b0 02 02 85 01 01 00 00 00 00 > 10: c1 10 00 00 c9 10 00 00 d1 10 00 00 d9 10 00 00 > 20: e1 10 00 00 f1 10 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 70 00 00 00 00 00 00 00 07 02 00 00 > 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 01 b0 03 00 08 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 03 01 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 01:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller]) > Subsystem: Hewlett-Packard Company Device 31fb > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (2000ns min), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at 3000 [size=256] > Region 2: Memory at fdef0000 (32-bit, non-prefetchable) [size=64K] > [virtual] Expansion ROM at fdd00000 [disabled] [size=128K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 02 10 5e 51 87 01 90 02 02 00 00 03 10 40 00 00 > 10: 08 00 00 d8 01 30 00 00 00 00 ef fd 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fb 31 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 08 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fb 31 > 50: 01 00 02 06 00 00 00 00 02 50 20 00 00 02 00 2f > 60: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03) > Subsystem: Hewlett-Packard Company Device 3305 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 22 > Region 0: I/O ports at 2800 [size=256] > Region 1: Memory at fdee0000 (32-bit, non-prefetchable) [size=512] > Capabilities: [f0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: hpwdt > Kernel modules: hpwdt > 00: 11 0e 03 b2 03 01 90 02 03 00 80 08 00 00 80 00 > 10: 01 28 00 00 00 00 ee fd 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 > 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0a 01 00 00 > 40: 67 fd 00 00 11 00 00 00 00 00 00 00 06 02 06 02 > 50: 00 00 00 00 00 00 00 00 ef 39 fd 77 01 00 00 5a > 60: 00 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 06 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 1a 00 88 03 43 50 51 00 > 90: 30 00 00 00 02 00 00 5f 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 02 00 00 00 00 00 04 04 c1 02 > b0: 00 0a 00 00 00 00 00 00 b7 01 10 51 84 00 03 09 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 01 00 00 00 00 00 00 00 01 00 00 00 00 13 21 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 > > 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 03) > Subsystem: Hewlett-Packard Company Device 3305 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 23 > BIST result: 00 > Region 0: I/O ports at 3400 [size=256] > Region 1: Memory at fded0000 (32-bit, non-prefetchable) [size=2K] > Region 2: Memory at fdec0000 (32-bit, non-prefetchable) [size=16K] > Region 3: Memory at fde00000 (32-bit, non-prefetchable) [size=512K] > [virtual] Expansion ROM at fdd20000 [disabled] [size=64K] > Capabilities: [f0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: hpilo > Kernel modules: hpilo > 00: 11 0e 04 b2 17 01 90 02 03 00 80 08 10 40 80 80 > 10: 01 34 00 00 00 00 ed fd 00 00 ec fd 00 00 e0 fd > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 > 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0b 02 00 00 > 40: 04 0d 00 00 00 00 00 00 00 00 00 00 0a 01 15 12 > 50: 03 e0 ff 00 05 00 40 00 04 00 00 00 00 00 e0 00 > 60: 00 00 00 00 00 00 00 00 8b 60 56 05 59 28 82 f8 > 70: 00 08 00 01 03 03 c0 00 00 00 00 00 00 00 00 00 > 80: fe 01 00 00 62 6a 06 00 6b 63 9b 14 88 48 00 00 > 90: 00 00 00 00 03 03 00 00 00 00 00 00 00 00 00 00 > a0: 14 03 02 00 80 00 00 00 20 00 00 00 00 00 00 00 > b0: 10 00 00 00 00 00 e7 81 ff fd 0e 0d 00 00 00 00 > c0: a3 0c 00 00 00 00 07 00 a5 0c 00 00 00 c0 07 00 > d0: 00 00 00 00 00 00 00 00 9a 17 00 00 00 00 00 00 > e0: 00 00 00 00 0b 00 00 00 00 00 00 00 0b 00 00 00 > f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 > > 01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB controller (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Device 3305 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin B routed to IRQ 23 > Region 4: I/O ports at 3800 [size=32] > Capabilities: [f0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00: 3c 10 00 33 45 01 90 02 00 00 03 0c 00 40 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 01 38 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 > 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0b 02 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 > > 01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual UART (prog-if 01) > Subsystem: Hewlett-Packard Company Device 3305 > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 22 > Region 0: Memory at fddf0000 (32-bit, non-prefetchable) [size=256] > Capabilities: [f0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ipmi_si > Kernel modules: ipmi_si > 00: 3c 10 02 33 02 00 90 02 00 01 07 0c 00 00 80 00 > 10: 00 00 df fd 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 > 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0a 01 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 > > 02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b5) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fdf00000-fdffffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [60] Express (v1) PCI/PCI-X Bridge, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <4us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [90] PCI-X bridge device > Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz > Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- > Upstream: Capacity=0 CommitmentLimit=0 > Downstream: Capacity=0 CommitmentLimit=0 > Capabilities: [b0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Advanced Error Reporting <?> > Capabilities: [14c] Power Budgeting <?> > Kernel modules: shpchp > 00: 66 11 03 01 47 01 10 00 b5 00 04 06 10 00 01 00 > 10: 00 00 00 00 00 00 00 00 02 03 03 40 f1 01 00 22 > 20: f0 fd f0 fd f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 60 00 00 00 00 00 00 00 60 00 03 00 > 40: 00 00 00 00 00 00 00 01 00 00 0c 20 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 c0 > 60: 10 90 71 00 a0 09 00 00 06 00 10 00 41 6c 01 00 > 70: 00 00 21 10 44 08 00 00 00 00 00 00 00 00 00 00 > 80: 01 00 00 00 20 20 30 2b 92 08 18 20 02 60 00 fb > 90: 07 b0 c3 00 00 02 00 00 00 00 00 00 00 00 00 00 > a0: 90 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 03:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet (rev a3) > Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 1272 > Region 0: Memory at fdff0000 (64-bit, non-prefetchable) [disabled] [size=64K] > Region 2: Memory at fdfe0000 (64-bit, non-prefetchable) [disabled] [size=64K] > Expansion ROM at <ignored> [disabled] > Capabilities: [40] PCI-X non-bridge device > Command: DPERE- ERO- RBC=512 OST=1 > Status: Dev=03:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable+ DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data <?> > Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+ > Address: 00000000fee0300c Data: 41d1 > Kernel driver in use: tg3 > Kernel modules: tg3 > 00: e4 14 78 16 00 00 b0 02 a3 00 00 02 10 40 80 00 > 10: 04 00 ff fd 00 00 00 00 04 00 fe fd 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 3e 70 > 30: 00 00 e3 82 40 00 00 00 00 00 00 00 0b 01 40 00 > 40: 07 48 00 00 20 03 43 04 01 50 02 c0 00 21 00 64 > 50: 03 58 04 00 3f 61 00 10 05 00 87 00 0c 30 e0 fe > 60: 00 00 00 00 d1 41 00 00 9a 02 03 90 00 00 00 00 > 70: 6a 10 00 00 c7 00 00 00 50 00 00 00 00 00 00 00 > 80: 03 58 04 00 40 00 00 40 00 00 01 00 fe d0 08 00 > 90: 01 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 03:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet (rev a3) > Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (16000ns min), Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at fdfd0000 (64-bit, non-prefetchable) [size=64K] > Region 2: Memory at fdfc0000 (64-bit, non-prefetchable) [size=64K] > Expansion ROM at <ignored> [disabled] > Capabilities: [40] PCI-X non-bridge device > Command: DPERE- ERO- RBC=512 OST=1 > Status: Dev=03:04.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data <?> > Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable- > Address: 00000000fee0300c Data: 41c9 > Kernel driver in use: tg3 > Kernel modules: tg3 > 00: e4 14 78 16 46 01 b0 02 a3 00 00 02 10 40 80 00 > 10: 04 00 fd fd 00 00 00 00 04 00 fc fd 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 3e 70 > 30: 00 00 6f ba 40 00 00 00 00 00 00 00 0a 02 40 00 > 40: 07 48 00 00 21 03 43 04 01 50 02 c0 00 20 00 64 > 50: 03 58 e8 00 6b ee 9b 7d 05 00 86 00 0c 30 e0 fe > 60: 00 00 00 00 c9 41 00 00 9a 02 03 90 00 80 14 76 > 70: ea 10 00 00 c7 00 00 00 14 04 00 00 00 00 00 00 > 80: 29 0a 99 5a 2a 00 00 00 34 00 00 00 fe d0 08 04 > 90: 01 07 00 09 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > Content-Description: tg3.reloaded > 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01) > Subsystem: Hewlett-Packard Company Device 31f9 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information <?> > 00: 86 80 f0 29 46 01 90 20 01 00 00 06 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 f9 31 > 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 > 40: 01 90 d1 fe 00 00 00 00 01 40 d1 fe 00 00 00 00 > 50: 00 00 02 00 03 20 00 00 00 00 00 00 00 00 00 00 > 60: 01 00 00 e0 00 00 00 00 01 80 d1 fe 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 30 11 31 13 11 31 33 00 ff 03 00 00 00 0a 38 00 > a0: 30 00 00 0c 00 00 00 c0 00 00 00 c0 00 00 00 c0 > b0: 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 > d0: 00 00 00 00 00 00 00 00 49 00 00 00 00 00 00 8c > e0: 09 00 0c 91 64 c8 fc c0 43 44 0b 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 90 0f 01 00 00 00 00 00 > > 00:01.0 PCI bridge: Intel Corporation 3200/3210 Chipset Host-Primary PCI Express Bridge (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=15, subordinate=1a, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [88] Subsystem: Hewlett-Packard Company Device 31f9 > Capabilities: [80] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4169 > Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Suprise- LLActRep- BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [100] Virtual Channel <?> > Capabilities: [140] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 f1 29 47 05 10 00 01 00 04 06 10 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 15 1a 00 f0 00 00 00 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 88 00 00 00 00 00 00 00 ff 01 03 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 > 80: 01 90 03 c8 08 00 00 00 0d 80 00 00 3c 10 f9 31 > 90: 05 a0 01 00 0c 30 e0 fe 69 41 00 00 00 00 00 00 > a0: 10 00 42 01 00 80 00 00 06 00 00 00 01 3d 21 02 > b0: 40 00 01 10 00 00 04 00 00 00 00 00 0e 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 01 00 03 e1 3f 80 90 0f 01 00 00 f0 00 f0 > > 00:06.0 PCI bridge: Intel Corporation 3210 Chipset Host-Secondary PCI Express Bridge (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=12, subordinate=14, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [88] Subsystem: Hewlett-Packard Company Device 31f9 > Capabilities: [80] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4171 > Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #3, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Suprise- LLActRep- BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [100] Virtual Channel <?> > Capabilities: [140] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 f9 29 47 05 10 00 01 00 04 06 10 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 12 14 00 f0 00 00 00 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 88 00 00 00 00 00 00 00 ff 01 03 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 > 80: 01 90 03 c8 08 00 00 00 0d 80 00 00 3c 10 f9 31 > 90: 05 a0 01 00 0c 30 e0 fe 71 41 00 00 00 00 00 00 > a0: 10 00 42 01 00 80 00 00 06 00 00 00 81 3c 21 03 > b0: 40 00 01 10 00 00 04 00 00 00 00 00 0e 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 01 00 03 e1 3f 80 90 0f 01 00 00 00 00 00 > > 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fdf00000-fdffffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <1us, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4179 > Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel <?> > Capabilities: [180] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 40 29 47 05 10 00 02 00 04 06 10 00 81 00 > 10: 00 00 00 00 00 00 00 00 00 02 03 00 f0 00 00 20 > 20: f0 fd f0 fd f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 00 > 40: 10 80 41 00 00 80 00 00 06 00 10 00 21 4c 11 01 > 50: 00 00 21 30 60 00 00 00 00 00 48 01 0e 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 90 01 00 0c 30 e0 fe 79 41 00 00 00 00 00 00 > 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 > e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=04, subordinate=06, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4181 > Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel <?> > Capabilities: [180] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 44 29 47 05 10 00 02 00 04 06 10 00 81 00 > 10: 00 00 00 00 00 00 00 00 00 04 06 00 f0 00 00 20 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 03 03 00 > 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 03 > 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 90 01 00 0c 30 e0 fe 81 41 00 00 00 00 00 00 > 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 > e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=07, subordinate=09, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4189 > Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel <?> > Capabilities: [180] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 46 29 47 05 10 00 02 00 04 06 10 00 81 00 > 10: 00 00 00 00 00 00 00 00 00 07 09 00 f0 00 00 20 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 04 03 00 > 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 04 > 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 90 01 00 0c 30 e0 fe 89 41 00 00 00 00 00 00 > 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 > e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4191 > Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel <?> > Capabilities: [180] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 48 29 47 05 10 00 02 00 04 06 10 00 81 00 > 10: 00 00 00 00 00 00 00 00 00 0a 0c 00 f0 00 00 20 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 00 > 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 05 > 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 90 01 00 0c 30 e0 fe 91 41 00 00 00 00 00 00 > 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 > e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=0d, subordinate=11, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4199 > Capabilities: [90] Subsystem: Gammagraphx, Inc. Device 0000 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel <?> > Capabilities: [180] Root Complex Link <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > 00: 86 80 4a 29 47 05 10 00 02 00 04 06 10 00 81 00 > 10: 00 00 00 00 00 00 00 00 00 0d 11 00 f0 00 00 20 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 02 03 00 > 40: 10 80 41 00 00 80 00 00 06 00 10 00 11 4c 11 06 > 50: 00 00 01 10 60 00 00 00 00 00 40 00 0e 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 90 01 00 0c 30 e0 fe 99 41 00 00 00 00 00 00 > 90: 0d a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00 > e0: 00 00 c7 00 06 07 08 00 30 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 21 > Region 4: I/O ports at 1000 [size=32] > Capabilities: [50] PCIe advanced features <?> > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00: 86 80 34 29 05 00 90 02 02 00 03 0c 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 01 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 21 > Region 4: I/O ports at 1020 [size=32] > Capabilities: [50] PCIe advanced features <?> > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00: 86 80 35 29 05 00 90 02 02 00 03 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 21 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 02 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 21 > Region 4: I/O ports at 1040 [size=32] > Capabilities: [50] PCIe advanced features <?> > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00: 86 80 36 29 05 00 90 02 02 00 03 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 41 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 03 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin D routed to IRQ 21 > Region 4: I/O ports at 1060 [size=32] > Capabilities: [50] PCIe advanced features <?> > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00: 86 80 39 29 05 00 90 02 02 00 03 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 61 10 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 21 > Region 0: Memory at fdcf0000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Capabilities: [98] PCIe advanced features <?> > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > 00: 86 80 3a 29 46 01 90 02 02 20 03 0c 00 00 00 00 > 10: 00 00 cf fd 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 01 58 c2 c9 00 00 00 00 0a 98 a0 20 00 00 00 00 > 60: 20 20 ff 01 00 00 00 00 01 00 00 01 00 00 08 c0 > 70: 00 00 cf 3f 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 88 85 40 00 86 0f 02 00 06 17 02 20 > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 00002000-00003fff > Memory behind bridge: fdd00000-fdefffff > Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Subsystem: Hewlett-Packard Company Device 31fe > 00: 86 80 4e 24 47 01 10 00 92 01 04 06 00 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 01 01 40 20 30 80 22 > 20: d0 fd e0 fd 01 d8 f1 df 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 0b 00 > 40: 00 00 00 00 00 00 00 00 01 00 00 00 00 12 00 00 > 50: 0d 00 00 00 3c 10 fe 31 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information <?> > 00: 86 80 16 29 47 01 10 02 02 00 01 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 > 40: 01 09 00 00 80 00 00 00 01 08 00 00 10 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 8b 8a 80 80 d0 00 00 00 87 85 8a 8b f8 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 09 34 01 03 0c 00 01 06 7c 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 02 00 00 08 02 00 00 13 00 00 00 00 03 00 00 > b0: 00 00 f0 00 00 00 00 00 00 40 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 67 45 00 00 cf ff 00 00 01 00 00 00 > e0: 09 00 0c 10 00 00 c4 02 60 00 00 00 00 00 00 00 > f0: 01 c0 d1 fe 44 f2 0e 00 86 0f 02 00 00 00 00 00 > > 00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 20 > Region 0: I/O ports at 1080 [size=8] > Region 1: I/O ports at 1088 [size=4] > Region 2: I/O ports at 1090 [size=8] > Region 3: I/O ports at 1098 [size=4] > Region 4: I/O ports at 10a0 [size=16] > Region 5: I/O ports at 10b0 [size=16] > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] PCIe advanced features <?> > Kernel driver in use: ata_piix > Kernel modules: ide-pci-generic, ata_generic, ata_piix > 00: 86 80 20 29 47 00 b0 02 02 8f 01 01 00 00 00 00 > 10: 81 10 00 00 89 10 00 00 91 10 00 00 99 10 00 00 > 20: a1 10 00 00 b1 10 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 70 00 00 00 00 00 00 00 07 02 00 00 > 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 01 b0 03 00 08 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 0f 03 80 01 80 00 00 00 00 00 00 00 00 00 > a0: ac 00 00 00 0a 00 12 00 00 00 00 00 00 00 00 00 > b0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO]) > Subsystem: Hewlett-Packard Company Device 31fe > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 20 > Region 0: I/O ports at 10c0 [size=8] > Region 1: I/O ports at 10c8 [size=4] > Region 2: I/O ports at 10d0 [size=8] > Region 3: I/O ports at 10d8 [size=4] > Region 4: I/O ports at 10e0 [size=16] > Region 5: I/O ports at 10f0 [size=16] > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] PCIe advanced features <?> > Kernel driver in use: ata_piix > Kernel modules: ide-pci-generic, ata_generic, ata_piix > 00: 86 80 26 29 47 00 b0 02 02 85 01 01 00 00 00 00 > 10: c1 10 00 00 c9 10 00 00 d1 10 00 00 d9 10 00 00 > 20: e1 10 00 00 f1 10 00 00 00 00 00 00 3c 10 fe 31 > 30: 00 00 00 00 70 00 00 00 00 00 00 00 07 02 00 00 > 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 01 b0 03 00 08 00 00 00 00 00 00 00 00 00 00 00 > 80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 03 01 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 > > 01:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller]) > Subsystem: Hewlett-Packard Company Device 31fb > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (2000ns min), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at 3000 [size=256] > Region 2: Memory at fdef0000 (32-bit, non-prefetchable) [size=64K] > [virtual] Expansion ROM at fdd00000 [disabled] [size=128K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 02 10 5e 51 87 01 90 02 02 00 00 03 10 40 00 00 > 10: 08 00 00 d8 01 30 00 00 00 00 ef fd 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fb 31 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 08 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fb 31 > 50: 01 00 02 06 00 00 00 00 02 50 20 00 00 02 00 2f > 60: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03) > Subsystem: Hewlett-Packard Company Device 3305 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 22 > Region 0: I/O ports at 2800 [size=256] > Region 1: Memory at fdee0000 (32-bit, non-prefetchable) [size=512] > Capabilities: [f0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: hpwdt > Kernel modules: hpwdt > 00: 11 0e 03 b2 03 01 90 02 03 00 80 08 00 00 80 00 > 10: 01 28 00 00 00 00 ee fd 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 > 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0a 01 00 00 > 40: 67 fd 00 00 11 00 00 00 00 00 00 00 06 02 06 02 > 50: 00 00 00 00 00 00 00 00 fa 39 fd 77 01 00 00 5a > 60: 00 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 06 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 1a 00 88 03 43 50 51 00 > 90: 30 00 00 00 02 00 00 5f 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 02 00 00 00 00 00 04 04 c1 02 > b0: 00 0a 00 00 00 00 00 00 b7 01 10 51 84 00 03 09 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 01 00 00 00 00 00 00 00 01 00 00 00 00 13 21 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 > > 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 03) > Subsystem: Hewlett-Packard Company Device 3305 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 23 > BIST result: 00 > Region 0: I/O ports at 3400 [size=256] > Region 1: Memory at fded0000 (32-bit, non-prefetchable) [size=2K] > Region 2: Memory at fdec0000 (32-bit, non-prefetchable) [size=16K] > Region 3: Memory at fde00000 (32-bit, non-prefetchable) [size=512K] > [virtual] Expansion ROM at fdd20000 [disabled] [size=64K] > Capabilities: [f0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: hpilo > Kernel modules: hpilo > 00: 11 0e 04 b2 17 01 90 02 03 00 80 08 10 40 80 80 > 10: 01 34 00 00 00 00 ed fd 00 00 ec fd 00 00 e0 fd > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 > 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0b 02 00 00 > 40: 04 0d 00 00 00 00 00 00 00 00 00 00 0a 01 15 12 > 50: 03 e0 ff 00 05 00 40 00 04 00 00 00 00 00 e0 00 > 60: 00 00 00 00 00 00 00 00 8b 60 56 05 59 28 82 f8 > 70: 00 08 00 01 03 03 c0 00 00 00 00 00 00 00 00 00 > 80: bb 03 00 00 57 39 06 00 73 08 4c c5 8e 48 00 00 > 90: 00 00 00 00 03 03 00 00 00 00 00 00 00 00 00 00 > a0: 14 03 02 00 80 00 00 00 20 00 00 00 00 00 00 00 > b0: 10 00 00 00 00 00 e7 81 ff fd 0e 0d 00 00 00 00 > c0: a3 0c 00 00 00 00 07 00 a5 0c 00 00 00 c0 07 00 > d0: 00 00 00 00 00 00 00 00 9a 17 00 00 00 00 00 00 > e0: 00 00 00 00 0b 00 00 00 00 00 00 00 0b 00 00 00 > f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 > > 01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB controller (prog-if 00 [UHCI]) > Subsystem: Hewlett-Packard Company Device 3305 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin B routed to IRQ 23 > Region 4: I/O ports at 3800 [size=32] > Capabilities: [f0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00: 3c 10 00 33 45 01 90 02 00 00 03 0c 00 40 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 01 38 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 > 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0b 02 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 > > 01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual UART (prog-if 01) > Subsystem: Hewlett-Packard Company Device 3305 > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 22 > Region 0: Memory at fddf0000 (32-bit, non-prefetchable) [size=256] > Capabilities: [f0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ipmi_si > Kernel modules: ipmi_si > 00: 3c 10 02 33 02 00 90 02 00 01 07 0c 00 00 80 00 > 10: 00 00 df fd 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 05 33 > 30: 00 00 00 00 f0 00 00 00 00 00 00 00 0a 01 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 > > 02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b5) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fdf00000-fdffffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [60] Express (v1) PCI/PCI-X Bridge, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <4us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [90] PCI-X bridge device > Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz > Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- > Upstream: Capacity=0 CommitmentLimit=0 > Downstream: Capacity=0 CommitmentLimit=0 > Capabilities: [b0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Advanced Error Reporting <?> > Capabilities: [14c] Power Budgeting <?> > Kernel modules: shpchp > 00: 66 11 03 01 47 01 10 00 b5 00 04 06 10 00 01 00 > 10: 00 00 00 00 00 00 00 00 02 03 03 40 f1 01 00 22 > 20: f0 fd f0 fd f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 60 00 00 00 00 00 00 00 60 00 03 00 > 40: 00 00 00 00 00 00 00 01 00 00 0c 20 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 c0 > 60: 10 90 71 00 a0 09 00 00 06 00 10 00 41 6c 01 00 > 70: 00 00 21 10 44 08 00 00 00 00 00 00 00 00 00 00 > 80: 01 00 00 00 20 20 30 2b 92 08 18 20 02 60 00 fb > 90: 07 b0 c3 00 00 02 00 00 00 00 00 00 00 00 00 00 > a0: 90 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 03:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet (rev a3) > Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (16000ns min), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 1272 > Region 0: Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] > Region 2: Memory at fdfe0000 (64-bit, non-prefetchable) [size=64K] > Expansion ROM at <ignored> [disabled] > Capabilities: [40] PCI-X non-bridge device > Command: DPERE- ERO- RBC=512 OST=1 > Status: Dev=03:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable+ DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data <?> > Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+ > Address: 00000000fee0300c Data: 41e1 > Kernel driver in use: tg3 > Kernel modules: tg3 > 00: e4 14 78 16 06 00 b0 02 a3 00 00 02 10 40 80 00 > 10: 04 00 ff fd 00 00 00 00 04 00 fe fd 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 3e 70 > 30: 00 00 e3 82 40 00 00 00 00 00 00 00 0b 01 40 00 > 40: 07 48 00 00 20 03 43 04 01 50 02 c0 00 21 00 64 > 50: 03 58 04 00 3f 61 00 10 05 00 87 00 0c 30 e0 fe > 60: 00 00 00 00 e1 41 00 00 98 02 03 90 00 80 14 76 > 70: ea 10 00 00 c7 00 00 00 50 00 00 00 00 00 00 00 > 80: 03 58 04 00 d0 00 00 c0 34 00 13 04 82 d0 08 04 > 90: 09 97 00 01 00 00 00 00 00 00 00 00 bf 00 00 00 > a0: 00 00 00 00 f7 01 00 00 00 00 00 00 a2 00 00 00 > b0: 00 00 00 00 00 00 00 65 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 03:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet (rev a3) > Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (16000ns min), Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at fdfd0000 (64-bit, non-prefetchable) [size=64K] > Region 2: Memory at fdfc0000 (64-bit, non-prefetchable) [size=64K] > Expansion ROM at <ignored> [disabled] > Capabilities: [40] PCI-X non-bridge device > Command: DPERE- ERO- RBC=512 OST=1 > Status: Dev=03:04.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data <?> > Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable- > Address: 00000000fee0300c Data: 41c9 > Kernel driver in use: tg3 > Kernel modules: tg3 > 00: e4 14 78 16 46 01 b0 02 a3 00 00 02 10 40 80 00 > 10: 04 00 fd fd 00 00 00 00 04 00 fc fd 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 3e 70 > 30: 00 00 6f ba 40 00 00 00 00 00 00 00 0a 02 40 00 > 40: 07 48 00 00 21 03 43 04 01 50 02 c0 00 20 00 64 > 50: 03 58 e8 00 6b ee 9b 7d 05 00 86 00 0c 30 e0 fe > 60: 00 00 00 00 c9 41 00 00 9a 02 03 90 00 80 14 76 > 70: ea 10 00 00 c7 00 00 00 14 04 00 00 00 00 00 00 > 80: 29 0a 99 5a 2a 00 00 00 34 00 00 00 fe d0 08 04 > 90: 01 07 00 09 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-19 16:58 ` Matt Carlson @ 2009-03-19 18:06 ` Bernhard Schmidt 2009-03-19 18:15 ` Matt Carlson 2009-03-22 13:21 ` Bernhard Schmidt 1 sibling, 1 reply; 16+ messages in thread From: Bernhard Schmidt @ 2009-03-19 18:06 UTC (permalink / raw) To: Matt Carlson Cc: Michael Chan, Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org On Thu, Mar 19, 2009 at 09:58:42AM -0700, Matt Carlson wrote: Hello Matt, > Hi Bernhard. I talked to Michael about this and we'd like you to try > two things. > > 1) Can you disable iLo2 and see if you can still reproduce the problem? That will take a few days, I'll ask the on-site guys to check whether we have an external IP-KVM available. Would switching the uplink connection to eth1 (and not use eth0 in Linux) give some more clue as well? > 2) Can you apply the following patch to get more information on when > MMIO gets disabled? Applied, I'll send you the information as soon as it happens again (which seems to be happening rather often the last couple of days). Bernhard ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-19 18:06 ` Bernhard Schmidt @ 2009-03-19 18:15 ` Matt Carlson 2009-03-19 18:19 ` Bernhard Schmidt 0 siblings, 1 reply; 16+ messages in thread From: Matt Carlson @ 2009-03-19 18:15 UTC (permalink / raw) To: Bernhard Schmidt Cc: Matthew Carlson, Michael Chan, Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org On Thu, Mar 19, 2009 at 11:06:44AM -0700, Bernhard Schmidt wrote: > On Thu, Mar 19, 2009 at 09:58:42AM -0700, Matt Carlson wrote: > > Hello Matt, > > > Hi Bernhard. I talked to Michael about this and we'd like you to try > > two things. > > > > 1) Can you disable iLo2 and see if you can still reproduce the problem? > > That will take a few days, I'll ask the on-site guys to check whether we > have an external IP-KVM available. > > Would switching the uplink connection to eth1 (and not use eth0 in > Linux) give some more clue as well? Sure, let's try that. Maybe this is the better way to go anyways. I just learned that disabling iLo2 doesn't necessarily disable the management firmware on the network device. For this to be a meaningful test though, we need to verify that the driver sign-on messages have a line that reads "ASF[0]" on eth1. Can you confirm? > > 2) Can you apply the following patch to get more information on when > > MMIO gets disabled? > > Applied, I'll send you the information as soon as it happens again > (which seems to be happening rather often the last couple of days). Thanks. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-19 18:15 ` Matt Carlson @ 2009-03-19 18:19 ` Bernhard Schmidt 0 siblings, 0 replies; 16+ messages in thread From: Bernhard Schmidt @ 2009-03-19 18:19 UTC (permalink / raw) To: Matt Carlson Cc: Michael Chan, Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org On Thu, Mar 19, 2009 at 11:15:36AM -0700, Matt Carlson wrote: > > Would switching the uplink connection to eth1 (and not use eth0 in > > Linux) give some more clue as well? > Sure, let's try that. Maybe this is the better way to go anyways. I just > learned that disabling iLo2 doesn't necessarily disable the management > firmware on the network device. > > For this to be a meaningful test though, we need to verify that the > driver sign-on messages have a line that reads "ASF[0]" on eth1. Can > you confirm? Yes: [1186598.218205] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] [1186598.281314] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] I'll keep the traffic on eth0 now until it breaks again, hopefully spewing out more debugging info with your patch and then I'll switch to eth1. Bernhard ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-19 16:58 ` Matt Carlson 2009-03-19 18:06 ` Bernhard Schmidt @ 2009-03-22 13:21 ` Bernhard Schmidt 2009-03-23 18:18 ` Matt Carlson 2009-03-31 16:26 ` Matt Carlson 1 sibling, 2 replies; 16+ messages in thread From: Bernhard Schmidt @ 2009-03-22 13:21 UTC (permalink / raw) To: Matt Carlson Cc: Michael Chan, Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org On Thu, Mar 19, 2009 at 09:58:42AM -0700, Matt Carlson wrote: Hello Matt, > Hi Bernhard. I talked to Michael about this and we'd like you to try > two things. > > 1) Can you disable iLo2 and see if you can still reproduce the problem? > 2) Can you apply the following patch to get more information on when > MMIO gets disabled? Not sure this is going to help you. NIC crashed two times tonight, logs look like this Mar 22 04:06:46 svr02 kernel: [1392136.468921] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:47 svr02 kernel: [1392137.520288] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:48 svr02 kernel: [1392138.568267] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:49 svr02 kernel: [1392139.616266] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:50 svr02 kernel: [1392140.664266] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:51 svr02 kernel: [1392141.712276] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:52 svr02 kernel: [1392142.760297] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:53 svr02 kernel: [1392143.808258] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:54 svr02 kernel: [1392144.856256] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:55 svr02 kernel: [1392145.904266] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:56 svr02 kernel: [1392146.952276] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:57 svr02 kernel: [1392148.000267] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:58 svr02 kernel: [1392149.048271] PCI Memory Mapped IO Disabled!!!! Mar 22 04:06:59 svr02 kernel: [1392150.096268] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:00 svr02 kernel: [1392151.144277] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:01 svr02 kernel: [1392152.192287] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:02 svr02 kernel: [1392153.240268] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:03 svr02 kernel: [1392154.288267] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:04 svr02 kernel: [1392155.336267] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:05 svr02 kernel: [1392156.384268] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:07 svr02 kernel: [1392157.432267] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:08 svr02 kernel: [1392158.480266] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:09 svr02 kernel: [1392159.528289] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:10 svr02 kernel: [1392160.576297] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:11 svr02 kernel: [1392161.624277] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:12 svr02 kernel: [1392162.672267] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:13 svr02 kernel: [1392163.720266] PCI Memory Mapped IO Disabled!!!! Mar 22 04:07:14 svr02 kernel: [1392164.768266] PCI Memory Mapped IO Disabled!!!! at this point the "watchdog" kicked in and did rmmod/modprobe, so I think the only thing you can read out of this debugging log is that there was no kernel message right before MMIO got disabled and it takes quite a while to fire the Tx timeout. Mar 22 04:07:15 svr02 kernel: [1392165.540078] tg3 0000:03:04.1: PCI INT B disabled Mar 22 04:07:16 svr02 kernel: [1392166.817125] tg3: tg3_abort_hw timed out for eth0, TX_MODE_ENABLE will not clear MAC_TX_MODE=ffffffff Mar 22 04:07:18 svr02 kernel: [1392168.398844] tg3: eth0: No firmware running. Mar 22 04:07:29 svr02 kernel: [1392179.793309] tg3: eth0: Link is down. Mar 22 04:07:31 svr02 kernel: [1392181.896030] tg3 0000:03:04.0: PCI INT A disabled Mar 22 04:07:33 svr02 kernel: [1392183.957132] tg3.c:v3.94 (August 14, 2008) Mar 22 04:07:33 svr02 kernel: [1392184.020034] tg3 0000:03:04.0: enabling device (0000 -> 0002) Mar 22 04:07:33 svr02 kernel: [1392184.086083] tg3 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 I'm now switching to eth1. Bernhard ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-22 13:21 ` Bernhard Schmidt @ 2009-03-23 18:18 ` Matt Carlson 2009-03-24 0:35 ` Bernhard Schmidt 2009-03-31 16:26 ` Matt Carlson 1 sibling, 1 reply; 16+ messages in thread From: Matt Carlson @ 2009-03-23 18:18 UTC (permalink / raw) To: Bernhard Schmidt Cc: Matthew Carlson, Michael Chan, Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org On Sun, Mar 22, 2009 at 06:21:21AM -0700, Bernhard Schmidt wrote: > On Thu, Mar 19, 2009 at 09:58:42AM -0700, Matt Carlson wrote: > > Hello Matt, > > > Hi Bernhard. I talked to Michael about this and we'd like you to try > > two things. > > > > 1) Can you disable iLo2 and see if you can still reproduce the problem? > > 2) Can you apply the following patch to get more information on when > > MMIO gets disabled? > > Not sure this is going to help you. NIC crashed two times tonight, logs > look like this Actually, it does. :) > Mar 22 04:06:46 svr02 kernel: [1392136.468921] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:47 svr02 kernel: [1392137.520288] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:48 svr02 kernel: [1392138.568267] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:49 svr02 kernel: [1392139.616266] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:50 svr02 kernel: [1392140.664266] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:51 svr02 kernel: [1392141.712276] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:52 svr02 kernel: [1392142.760297] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:53 svr02 kernel: [1392143.808258] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:54 svr02 kernel: [1392144.856256] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:55 svr02 kernel: [1392145.904266] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:56 svr02 kernel: [1392146.952276] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:57 svr02 kernel: [1392148.000267] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:58 svr02 kernel: [1392149.048271] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:59 svr02 kernel: [1392150.096268] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:00 svr02 kernel: [1392151.144277] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:01 svr02 kernel: [1392152.192287] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:02 svr02 kernel: [1392153.240268] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:03 svr02 kernel: [1392154.288267] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:04 svr02 kernel: [1392155.336267] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:05 svr02 kernel: [1392156.384268] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:07 svr02 kernel: [1392157.432267] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:08 svr02 kernel: [1392158.480266] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:09 svr02 kernel: [1392159.528289] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:10 svr02 kernel: [1392160.576297] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:11 svr02 kernel: [1392161.624277] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:12 svr02 kernel: [1392162.672267] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:13 svr02 kernel: [1392163.720266] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:14 svr02 kernel: [1392164.768266] PCI Memory Mapped IO Disabled!!!! > > at this point the "watchdog" kicked in and did rmmod/modprobe, so I > think the only thing you can read out of this debugging log is that > there was no kernel message right before MMIO got disabled and it takes > quite a while to fire the Tx timeout. So traffic on this box must be pretty light for the watchdog to fire off 30 seconds after the MMIO problem was detected, right? Interesting. > Mar 22 04:07:15 svr02 kernel: [1392165.540078] tg3 0000:03:04.1: PCI INT B disabled > Mar 22 04:07:16 svr02 kernel: [1392166.817125] tg3: tg3_abort_hw timed out for eth0, TX_MODE_ENABLE will not clear MAC_TX_MODE=ffffffff > Mar 22 04:07:18 svr02 kernel: [1392168.398844] tg3: eth0: No firmware running. > Mar 22 04:07:29 svr02 kernel: [1392179.793309] tg3: eth0: Link is down. > Mar 22 04:07:31 svr02 kernel: [1392181.896030] tg3 0000:03:04.0: PCI INT A disabled > Mar 22 04:07:33 svr02 kernel: [1392183.957132] tg3.c:v3.94 (August 14, 2008) > Mar 22 04:07:33 svr02 kernel: [1392184.020034] tg3 0000:03:04.0: enabling device (0000 -> 0002) > Mar 22 04:07:33 svr02 kernel: [1392184.086083] tg3 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > I'm now switching to eth1. O.K. I eagerly await your results. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-23 18:18 ` Matt Carlson @ 2009-03-24 0:35 ` Bernhard Schmidt 0 siblings, 0 replies; 16+ messages in thread From: Bernhard Schmidt @ 2009-03-24 0:35 UTC (permalink / raw) To: Matt Carlson Cc: Michael Chan, Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org On 23.03.2009 19:18, Matt Carlson wrote: Hello Matt, >> Mar 22 04:06:46 svr02 kernel: [1392136.468921] PCI Memory Mapped IO Disabled!!!! [...] >> Mar 22 04:07:14 svr02 kernel: [1392164.768266] PCI Memory Mapped IO Disabled!!!! >> at this point the "watchdog" kicked in and did rmmod/modprobe, so I >> think the only thing you can read out of this debugging log is that >> there was no kernel message right before MMIO got disabled and it takes >> quite a while to fire the Tx timeout. > So traffic on this box must be pretty light for the watchdog to fire off > 30 seconds after the MMIO problem was detected, right? Interesting. Just to make sure I didn't confuse you, the "watchdog" I was talking about here is a shellscript like this, executed every minute --- /bin/ping -q -c 5 <defaultgw> > /dev/null RC=$? if [ ${RC} -ne 0 ]; then rmmod tg3; sleep 5; modprobe tg3; sleep 5; ifup --force eth0 fi --- at :46 MMIO was disabled, at :00 the cronjob started which took until :15 before detecting the network was dead and reloaded the modules >> Mar 22 04:07:15 svr02 kernel: [1392165.540078] tg3 0000:03:04.1: PCI INT B disabled >> Mar 22 04:07:16 svr02 kernel: [1392166.817125] tg3: tg3_abort_hw timed out for eth0, TX_MODE_ENABLE will not clear MAC_TX_MODE=ffffffff >> Mar 22 04:07:18 svr02 kernel: [1392168.398844] tg3: eth0: No firmware running. >> Mar 22 04:07:29 svr02 kernel: [1392179.793309] tg3: eth0: Link is down. >> Mar 22 04:07:31 svr02 kernel: [1392181.896030] tg3 0000:03:04.0: PCI INT A disabled >> Mar 22 04:07:33 svr02 kernel: [1392183.957132] tg3.c:v3.94 (August 14, 2008) >> Mar 22 04:07:33 svr02 kernel: [1392184.020034] tg3 0000:03:04.0: enabling device (0000 -> 0002) >> Mar 22 04:07:33 svr02 kernel: [1392184.086083] tg3 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 The tg3 watchdog (tg3: eth0: transmit timed out, resetting) did not appear at all in this circle, so I guess the checkscript killed the module before. Yes, the NIC is very lightly loaded, around 100kbps / 70pps in each direction with a few occasional spikes. >> I'm now switching to eth1. > O.K. I eagerly await your results. So far so good, but it has only been running ~36 hours, that's not really a stability spree yet :-) I'll keep you updated. Bernhard ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-22 13:21 ` Bernhard Schmidt 2009-03-23 18:18 ` Matt Carlson @ 2009-03-31 16:26 ` Matt Carlson 2009-03-31 22:16 ` Bernhard Schmidt 1 sibling, 1 reply; 16+ messages in thread From: Matt Carlson @ 2009-03-31 16:26 UTC (permalink / raw) To: Bernhard Schmidt Cc: Matthew Carlson, Michael Chan, Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org On Sun, Mar 22, 2009 at 06:21:21AM -0700, Bernhard Schmidt wrote: > On Thu, Mar 19, 2009 at 09:58:42AM -0700, Matt Carlson wrote: > > Hello Matt, > > > Hi Bernhard. I talked to Michael about this and we'd like you to try > > two things. > > > > 1) Can you disable iLo2 and see if you can still reproduce the problem? > > 2) Can you apply the following patch to get more information on when > > MMIO gets disabled? > > Not sure this is going to help you. NIC crashed two times tonight, logs > look like this > > Mar 22 04:06:46 svr02 kernel: [1392136.468921] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:47 svr02 kernel: [1392137.520288] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:48 svr02 kernel: [1392138.568267] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:49 svr02 kernel: [1392139.616266] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:50 svr02 kernel: [1392140.664266] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:51 svr02 kernel: [1392141.712276] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:52 svr02 kernel: [1392142.760297] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:53 svr02 kernel: [1392143.808258] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:54 svr02 kernel: [1392144.856256] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:55 svr02 kernel: [1392145.904266] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:56 svr02 kernel: [1392146.952276] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:57 svr02 kernel: [1392148.000267] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:58 svr02 kernel: [1392149.048271] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:06:59 svr02 kernel: [1392150.096268] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:00 svr02 kernel: [1392151.144277] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:01 svr02 kernel: [1392152.192287] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:02 svr02 kernel: [1392153.240268] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:03 svr02 kernel: [1392154.288267] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:04 svr02 kernel: [1392155.336267] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:05 svr02 kernel: [1392156.384268] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:07 svr02 kernel: [1392157.432267] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:08 svr02 kernel: [1392158.480266] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:09 svr02 kernel: [1392159.528289] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:10 svr02 kernel: [1392160.576297] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:11 svr02 kernel: [1392161.624277] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:12 svr02 kernel: [1392162.672267] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:13 svr02 kernel: [1392163.720266] PCI Memory Mapped IO Disabled!!!! > Mar 22 04:07:14 svr02 kernel: [1392164.768266] PCI Memory Mapped IO Disabled!!!! > > at this point the "watchdog" kicked in and did rmmod/modprobe, so I > think the only thing you can read out of this debugging log is that > there was no kernel message right before MMIO got disabled and it takes > quite a while to fire the Tx timeout. > > Mar 22 04:07:15 svr02 kernel: [1392165.540078] tg3 0000:03:04.1: PCI INT B disabled > Mar 22 04:07:16 svr02 kernel: [1392166.817125] tg3: tg3_abort_hw timed out for eth0, TX_MODE_ENABLE will not clear MAC_TX_MODE=ffffffff > Mar 22 04:07:18 svr02 kernel: [1392168.398844] tg3: eth0: No firmware running. > Mar 22 04:07:29 svr02 kernel: [1392179.793309] tg3: eth0: Link is down. > Mar 22 04:07:31 svr02 kernel: [1392181.896030] tg3 0000:03:04.0: PCI INT A disabled > Mar 22 04:07:33 svr02 kernel: [1392183.957132] tg3.c:v3.94 (August 14, 2008) > Mar 22 04:07:33 svr02 kernel: [1392184.020034] tg3 0000:03:04.0: enabling device (0000 -> 0002) > Mar 22 04:07:33 svr02 kernel: [1392184.086083] tg3 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > I'm now switching to eth1. Bernhard, any word on what happened? ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-31 16:26 ` Matt Carlson @ 2009-03-31 22:16 ` Bernhard Schmidt 2009-04-13 21:54 ` Bernhard Schmidt 0 siblings, 1 reply; 16+ messages in thread From: Bernhard Schmidt @ 2009-03-31 22:16 UTC (permalink / raw) To: Matt Carlson Cc: Michael Chan, Andrew Morton, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org On Tue, Mar 31, 2009 at 09:26:17AM -0700, Matt Carlson wrote: > > I'm now switching to eth1. > Bernhard, any word on what happened? So far so good. In the last week my watchdog (cannot reach the default gateway) triggered once, but since there were no "PCI Memory Mapped IO Disabled!!!!" messages in the logfile I assume that was a real network problem. Since the box ran fine for months initially and the first two occurances of this issue were two weeks apart I cannot say for sure, but it definitely feels better than the "once in two days" in the end. Bernhard ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-03-31 22:16 ` Bernhard Schmidt @ 2009-04-13 21:54 ` Bernhard Schmidt 2009-04-14 18:29 ` Matt Carlson 0 siblings, 1 reply; 16+ messages in thread From: Bernhard Schmidt @ 2009-04-13 21:54 UTC (permalink / raw) To: Matt Carlson Cc: Michael Chan, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org Hi Matt, >>> I'm now switching to eth1. >> Bernhard, any word on what happened? > > So far so good. In the last week my watchdog (cannot reach the default > gateway) triggered once, but since there were no "PCI Memory Mapped IO > Disabled!!!!" messages in the logfile I assume that was a real network > problem. Since the box ran fine for months initially and the first two > occurances of this issue were two weeks apart I cannot say for sure, but > it definitely feels better than the "once in two days" in the end. No crashes in the last two weeks. Do you have any further suggestions how to debug this or should we accept that portsharing doesn't work very well? This is the second problem we can directly attribute to the sharing with the iLO (the first one being the "no IPv6 unless the port is in promiscous mode", we had a thread about this here on netdev a few months ago). Bernhard ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC 2009-04-13 21:54 ` Bernhard Schmidt @ 2009-04-14 18:29 ` Matt Carlson 0 siblings, 0 replies; 16+ messages in thread From: Matt Carlson @ 2009-04-14 18:29 UTC (permalink / raw) To: Bernhard Schmidt Cc: Matthew Carlson, Michael Chan, netdev@vger.kernel.org, bugme-daemon@bugzilla.kernel.org On Mon, Apr 13, 2009 at 02:54:40PM -0700, Bernhard Schmidt wrote: > Hi Matt, > > >>> I'm now switching to eth1. > >> Bernhard, any word on what happened? > > > > So far so good. In the last week my watchdog (cannot reach the default > > gateway) triggered once, but since there were no "PCI Memory Mapped IO > > Disabled!!!!" messages in the logfile I assume that was a real network > > problem. Since the box ran fine for months initially and the first two > > occurances of this issue were two weeks apart I cannot say for sure, but > > it definitely feels better than the "once in two days" in the end. > > No crashes in the last two weeks. > > Do you have any further suggestions how to debug this or should we > accept that portsharing doesn't work very well? This is the second > problem we can directly attribute to the sharing with the iLO (the first > one being the "no IPv6 unless the port is in promiscous mode", we had a > thread about this here on netdev a few months ago). No, I think we need to get this to work with portsharing. We just need to figure out what it is about it that causes these types of errors. I talked to the firmware maintainer here. We have a couple ideas that might uncover what is happening. Our next step is to develop a set of tests that will show under what assumptions the firmware is operating. Once we have that, I'll ask you to patch your driver so that we can see what is happening from your end. Stay tuned. ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2009-04-14 18:29 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <bug-12877-10286@http.bugzilla.kernel.org/>
2009-03-15 21:32 ` [Bugme-new] [Bug 12877] New: tg3: eth0 transit timed out, resetting -> dead NIC Andrew Morton
2009-03-16 21:23 ` Michael Chan
2009-03-16 22:46 ` Bernhard Schmidt
2009-03-17 22:09 ` Bernhard Schmidt
2009-03-17 23:30 ` Michael Chan
2009-03-19 16:58 ` Matt Carlson
2009-03-19 18:06 ` Bernhard Schmidt
2009-03-19 18:15 ` Matt Carlson
2009-03-19 18:19 ` Bernhard Schmidt
2009-03-22 13:21 ` Bernhard Schmidt
2009-03-23 18:18 ` Matt Carlson
2009-03-24 0:35 ` Bernhard Schmidt
2009-03-31 16:26 ` Matt Carlson
2009-03-31 22:16 ` Bernhard Schmidt
2009-04-13 21:54 ` Bernhard Schmidt
2009-04-14 18:29 ` Matt Carlson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).