From: Michael Riepe <michael.riepe@googlemail.com>
To: Francois Romieu <romieu@fr.zoreil.com>
Cc: "Krzysztof Halasa" <khc@pm.waw.pl>,
"Michael Buesch" <mb@bu3sch.de>,
"David Dillow" <dave@thedillows.org>,
"Rui Santos" <rsantos@grupopie.com>,
"Michael Büker" <m.bueker@berlin.de>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: 2.6.27.19 + 28.7: network timeouts for r8169 and 8139too
Date: Wed, 13 May 2009 08:27:46 +0200 [thread overview]
Message-ID: <4A0A6862.3020809@googlemail.com> (raw)
In-Reply-To: <20090513061138.GA11106@electric-eye.fr.zoreil.com>
Hi!
Francois Romieu wrote:
> Michael Riepe <michael.riepe@googlemail.com> :
> [...]
>
>>How do lspci and dmesg report the chip? For mine, lspci says it's a
>>"RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)" while
>>the kernel reports "RTL8168c/8111c at 0xffffc200000f6000,
>>00:1c:c0:b6:1a:4a, XID 3c4000c0".
>
>
> The XID is more specific than the first kernel report. lspci is less
> accurate.
Then the question is: Are there two different revisions with the same
XID, or is it always the same chip that sometimes works and sometimes
doesn't?
I can't remember anybody reporting that the Intel D945GCLF2 works for
them, so it might also be an interoperability issue.
--
Michael "Tired" Riepe <michael.riepe@googlemail.com>
X-Tired: Each morning I get up I die a little
next prev parent reply other threads:[~2009-05-13 6:27 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200903041828.49972.m.bueker@berlin.de>
[not found] ` <20090322211159.GA23042@electric-eye.fr.zoreil.com>
[not found] ` <49CA1822.6050902@grupopie.com>
[not found] ` <200904041950.04324.mb@bu3sch.de>
[not found] ` <4A06D8D2.4010505@googlemail.com>
2009-05-11 0:29 ` 2.6.27.19 + 28.7: network timeouts for r8169 and 8139too David Dillow
2009-05-11 20:48 ` Michael Buesch
2009-05-11 21:10 ` Michael Buesch
2009-05-11 21:29 ` David Dillow
2009-05-11 21:59 ` Michael Buesch
2009-05-12 20:29 ` Michael Riepe
2009-05-14 2:38 ` David Dillow
2009-05-14 18:37 ` Michael Riepe
2009-05-14 19:14 ` David Dillow
2009-05-14 19:42 ` Michael Riepe
2009-05-23 1:29 ` [PATCH 2.6.30-rc4] r8169: avoid losing MSI interrupts David Dillow
2009-05-23 9:24 ` Michael Buesch
2009-05-23 14:35 ` Michael Riepe
2009-05-23 14:44 ` Michael Buesch
2009-05-23 15:01 ` Michael Riepe
2009-05-23 16:40 ` Michael Buesch
2009-05-23 14:51 ` David Dillow
2009-05-23 16:12 ` Michael Riepe
2009-05-23 16:45 ` Michael Buesch
2009-05-23 16:46 ` David Dillow
2009-05-23 16:50 ` Michael Buesch
2009-05-23 16:53 ` Michael Riepe
2009-05-23 17:03 ` David Dillow
2009-05-24 21:15 ` Francois Romieu
2009-05-24 22:55 ` David Dillow
2009-05-26 5:55 ` David Miller
2009-05-26 18:22 ` Michael Buesch
2009-05-26 21:52 ` David Miller
2009-05-26 22:14 ` David Miller
2009-05-26 22:40 ` Michael Riepe
2009-05-26 22:43 ` David Miller
2009-05-26 23:10 ` David Miller
2009-05-27 16:19 ` Michael Buesch
2009-06-16 19:32 ` Rui Santos
2009-08-21 20:57 ` Eric W. Biederman
2009-08-21 21:22 ` Michael Riepe
2009-08-21 22:59 ` David Dillow
2009-08-21 23:34 ` David Dillow
2009-08-22 0:24 ` Eric W. Biederman
2009-08-22 11:48 ` Eric W. Biederman
2009-08-22 12:07 ` Eric W. Biederman
2009-08-22 20:43 ` David Dillow
2009-08-23 17:17 ` Jarek Poplawski
2009-08-23 17:43 ` Michal Soltys
2009-08-23 17:54 ` Jarek Poplawski
2009-08-24 2:37 ` Eric W. Biederman
2009-08-25 0:51 ` Eric W. Biederman
2009-08-25 2:59 ` David Dillow
2009-08-25 20:22 ` Eric W. Biederman
2009-08-25 20:40 ` David Dillow
2009-08-25 21:24 ` Eric W. Biederman
2009-08-25 21:46 ` David Dillow
2009-08-25 22:19 ` Francois Romieu
2009-08-26 3:47 ` Eric W. Biederman
2009-08-26 7:58 ` [PATCH] r8169: Reduce looping in the interrupt handler Eric W. Biederman
2009-08-26 13:56 ` David Dillow
2009-08-26 13:59 ` David Dillow
2009-08-26 20:02 ` Eric W. Biederman
2009-08-26 21:30 ` Francois Romieu
2009-08-26 21:40 ` Eric W. Biederman
2009-08-27 5:24 ` Francois Romieu
2009-08-27 5:38 ` Eric W. Biederman
2009-08-27 23:20 ` Francois Romieu
2009-08-28 1:17 ` Eric W. Biederman
2009-08-28 1:29 ` David Dillow
2009-08-30 20:37 ` Francois Romieu
2009-08-30 20:53 ` Eric W. Biederman
2009-09-01 3:33 ` David Dillow
2009-09-01 9:20 ` Francois Romieu
2009-08-25 21:37 ` [PATCH 2.6.30-rc4] r8169: avoid losing MSI interrupts Eric W. Biederman
2009-08-25 21:54 ` David Dillow
2009-08-25 23:11 ` Francois Romieu
2009-05-12 11:10 ` 2.6.27.19 + 28.7: network timeouts for r8169 and 8139too Krzysztof Halasa
2009-05-12 21:45 ` Michael Riepe
2009-05-13 6:11 ` Francois Romieu
2009-05-13 6:27 ` Michael Riepe [this message]
2009-05-13 19:34 ` Krzysztof Halasa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A0A6862.3020809@googlemail.com \
--to=michael.riepe@googlemail.com \
--cc=dave@thedillows.org \
--cc=khc@pm.waw.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=m.bueker@berlin.de \
--cc=mb@bu3sch.de \
--cc=netdev@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
--cc=rsantos@grupopie.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).