From: Eric Dumazet <dada1@cosmosbay.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Subject: [PATCH] sch_teql: Use net_device internal stats
Date: Tue, 19 May 2009 07:43:09 +0200 [thread overview]
Message-ID: <4A1246ED.3080203@cosmosbay.com> (raw)
In-Reply-To: <20090518.193438.158960584.davem@davemloft.net>
David Miller a écrit :
> From: Eric Dumazet <dada1@cosmosbay.com>
> Date: Tue, 19 May 2009 03:34:03 +0200
>
>> Looking again at teql_master_xmit(), I wonder if there is another
>> problem in it.
>>
>> int subq = skb_get_queue_mapping(skb);
>>
>> But as a matter of fact, following code assumes subq is 0
>>
>> struct netdev_queue *slave_txq = netdev_get_tx_queue(slave, 0);
>> ...
>> if (__netif_subqueue_stopped(slave, subq) ||
>> ...
>>
>> Either we should set subq to 0, or call dev_pick_tx() to better
>> take into account multi queue slaves ?
>>
>> (As teqlN has one queue, I assume original dev_queue_xmit() will
>> set skb queue_mapping to 0 before entering teql_master_xmit(), but
>> maybe other paths could call teql_master_xmit() not through dev_queue_xmit() ?
>>
>> Oh well, time for sleeping a bit...
>
> I was admittedly very hasty with the multiqueue conversion here.
> I'll take a closer look at this.
Thanks David
In the meantime, I did the master->stats removal for teqlN devices, for net-next-2.6,
if you dont mind :)
[PATCH] sch_teql: Use net_device internal stats
We can slightly reduce size of teqlN structure, not duplicating stats structure
in teql_master but using stats field from net_device.stats for tx_errors and from
netdev_queue for tx_bytes/tx_packets/tx_dropped values.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
---
net/sched/sch_teql.c | 17 +++++------------
1 files changed, 5 insertions(+), 12 deletions(-)
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 3b64182..428a5ef 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -58,7 +58,6 @@ struct teql_master
struct net_device *dev;
struct Qdisc *slaves;
struct list_head master_list;
- struct net_device_stats stats;
};
struct teql_sched_data
@@ -272,6 +271,7 @@ static inline int teql_resolve(struct sk_buff *skb,
static int teql_master_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct teql_master *master = netdev_priv(dev);
+ struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
struct Qdisc *start, *q;
int busy;
int nores;
@@ -311,8 +311,8 @@ restart:
__netif_tx_unlock(slave_txq);
master->slaves = NEXT_SLAVE(q);
netif_wake_queue(dev);
- master->stats.tx_packets++;
- master->stats.tx_bytes += length;
+ txq->tx_packets++;
+ txq->tx_bytes += length;
return 0;
}
__netif_tx_unlock(slave_txq);
@@ -339,10 +339,10 @@ restart:
netif_stop_queue(dev);
return 1;
}
- master->stats.tx_errors++;
+ dev->stats.tx_errors++;
drop:
- master->stats.tx_dropped++;
+ txq->tx_dropped++;
dev_kfree_skb(skb);
return 0;
}
@@ -395,12 +395,6 @@ static int teql_master_close(struct net_device *dev)
return 0;
}
-static struct net_device_stats *teql_master_stats(struct net_device *dev)
-{
- struct teql_master *m = netdev_priv(dev);
- return &m->stats;
-}
-
static int teql_master_mtu(struct net_device *dev, int new_mtu)
{
struct teql_master *m = netdev_priv(dev);
@@ -425,7 +419,6 @@ static const struct net_device_ops teql_netdev_ops = {
.ndo_open = teql_master_open,
.ndo_stop = teql_master_close,
.ndo_start_xmit = teql_master_xmit,
- .ndo_get_stats = teql_master_stats,
.ndo_change_mtu = teql_master_mtu,
};
next prev parent reply other threads:[~2009-05-19 5:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-18 10:31 [PATCH] sch_teql: should not dereference skb after ndo_start_xmit Eric Dumazet
2009-05-18 22:12 ` David Miller
2009-05-19 1:34 ` Eric Dumazet
2009-05-19 2:34 ` David Miller
2009-05-19 5:43 ` Eric Dumazet [this message]
2009-05-19 22:16 ` [PATCH] sch_teql: Use net_device internal stats David Miller
2009-08-03 1:59 ` [PATCH] sch_teql: should not dereference skb after ndo_start_xmit David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A1246ED.3080203@cosmosbay.com \
--to=dada1@cosmosbay.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).