From: "Paweł Staszewski" <pstaszewski@itcare.pl>
To: Jarek Poplawski <jarkao2@gmail.com>
Cc: jamal <hadi@cyberus.ca>,
Linux Network Development list <netdev@vger.kernel.org>
Subject: Re: iproute2 action/policer question
Date: Mon, 15 Jun 2009 19:08:53 +0200 [thread overview]
Message-ID: <4A368025.5000902@itcare.pl> (raw)
In-Reply-To: <20090615164417.GB9469@ami.dom.local>
Jarek Poplawski pisze:
> On Mon, Jun 15, 2009 at 06:37:06PM +0200, Jarek Poplawski wrote:
>
>> On Mon, Jun 15, 2009 at 06:09:57PM +0200, Paweł Staszewski wrote:
>>
>>> Jarek Poplawski pisze:
>>>
>>>> On Mon, Jun 15, 2009 at 09:32:08AM -0400, jamal wrote:
>>>>
>>>>
>>>>> On Mon, 2009-06-15 at 11:19 +0000, Jarek Poplawski wrote:
>>>>>
>>>>>
>>>>>
>>>>>>> This is only a sample but is not working
>>>>>>>
>>>>>>>
>>>>> It does seem to be working!
>>>>> How did you reach conclusion it wasnt working?
>>>>>
>>>>>
>>>>>
>>>>>>> Action statistics:
>>>>>>> Sent 42351 bytes 110 pkt (dropped 0, overlimits 32 requeues 0)
>>>>>>> rate 0bit 0pps backlog 0b 0p requeues 0
>>>>>>>
>>>>>>>
>>>>> 32 packets hit the policer - double check your parameters please to make
>>>>> sure they are correct.
>>>>>
>>>>>
>>>>
>>>>
>>> Yes. packets hits policer but second action dont drop packets.
>>>
>> I guess Jamal meant 'hit the policer' == 'dropped' (and 110 - 32
>> passed). So the question is how did you checked it's otherwise.
>>
>
> Hmm... Not that we don't believe you, but some other (tc -s qdisc ?)
> stats with this would be appreciated before checking the code.;-)
>
>
hmm...
Test that i make
ping -I 94.246.128.23 194.6.246.23 -s 900
PING 194.6.246.23 (194.6.246.23) from 94.246.128.23 : 900(928) bytes of
data.
908 bytes from 194.6.246.23: icmp_seq=1 ttl=63 time=0.595 ms
908 bytes from 194.6.246.23: icmp_seq=8 ttl=63 time=0.451 ms
^C
--- 194.6.246.23 ping statistics ---
9 packets transmitted, 2 received, 77% packet loss, time 8046ms
tc -s -d filter show dev eth0
filter parent 1: protocol ip pref 2 u32
filter parent 1: protocol ip pref 2 u32 fh 800: ht divisor 1
filter parent 1: protocol ip pref 2 u32 fh 800::800 order 2048 key ht
800 bkt 0 flowid 1:2 (rule hit 145 success 134)
match 5ef6801c/ffffffff at 12 (success 134 )
filter parent 1: protocol ip pref 10 u32
filter parent 1: protocol ip pref 10 u32 fh 801: ht divisor 1
filter parent 1: protocol ip pref 10 u32 fh 801::800 order 2048 key ht
801 bkt 0 flowid 1:3 (rule hit 11 success 11)
match 00000000/00000000 at 12 (success 11 )
action order 1: tablename: mangle hook: NF_IP_POST_ROUTING
target MARK xset 0x1/0xffffffff
index 20 ref 1 bind 1 installed 15 sec used 3 sec
Action statistics:
Sent 10762 bytes 11 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
action order 2: police 0xf rate 1000bit burst 1023b mtu 2Kb
action drop overhead 0b
ref 1 bind 1
Action statistics:
Sent 10762 bytes 11 pkt (dropped 0, overlimits 9 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
tc -s -d qdisc show dev eth0
qdisc hfsc 1: root default 10
Sent 32180 bytes 288 pkt (dropped 13, overlimits 77 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
qdisc sfq 2: parent 1:2 limit 127p quantum 1514b flows 127/1024
Sent 30296 bytes 286 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
qdisc sfq 3: parent 1:3 limit 127p quantum 1514b flows 127/1024
Sent 1884 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
in stats i see overlimits / no drops
but packets are dropped :) yes sorry for this that i write before - that
there is no drops
But what with ipt -j MARK ?
Where i can catch this mark ?
Or i can't catch packet like this, but then for what will be this ipt
action ?
Because if i understand correct this action works like iptables -j MARK
in POSTROUTING mangle ?
> Jarek P.
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
next prev parent reply other threads:[~2009-06-15 17:08 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-09 20:10 iproute2 action/policer question Paweł Staszewski
2009-06-15 11:19 ` Jarek Poplawski
2009-06-15 13:32 ` jamal
2009-06-15 14:52 ` Jarek Poplawski
2009-06-15 16:09 ` Paweł Staszewski
2009-06-15 16:37 ` Jarek Poplawski
2009-06-15 16:44 ` Jarek Poplawski
2009-06-15 17:08 ` Paweł Staszewski [this message]
2009-06-15 20:07 ` Jarek Poplawski
2009-06-16 12:04 ` jamal
2009-06-17 6:14 ` Jarek Poplawski
2009-06-17 6:28 ` Jarek Poplawski
2009-06-17 6:45 ` Jarek Poplawski
2009-06-17 9:01 ` Denys Fedoryschenko
2009-06-17 9:26 ` Jarek Poplawski
2009-06-17 13:09 ` jamal
2009-06-17 13:30 ` Andreas Henriksson
2009-06-17 19:43 ` Jarek Poplawski
2009-06-18 13:19 ` jamal
2009-06-18 18:39 ` Jarek Poplawski
2009-06-15 21:47 ` [PATCH] " Jarek Poplawski
2009-06-16 12:07 ` jamal
2009-06-16 18:33 ` [PATCH v2] " Jarek Poplawski
2009-06-17 9:33 ` Paweł Staszewski
2009-06-18 1:57 ` David Miller
2009-06-15 16:13 ` Paweł Staszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A368025.5000902@itcare.pl \
--to=pstaszewski@itcare.pl \
--cc=hadi@cyberus.ca \
--cc=jarkao2@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).