From: "Paweł Staszewski" <pstaszewski@itcare.pl>
To: Jarek Poplawski <jarkao2@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>,
Linux Network Development list <netdev@vger.kernel.org>,
Robert Olsson <robert@robur.slu.se>
Subject: Re: [PATCH net-2.6] Re: rib_trie / Fix inflate_threshold_root. Now=15 size=11 bits
Date: Wed, 08 Jul 2009 00:56:13 +0200 [thread overview]
Message-ID: <4A53D28D.8060409@itcare.pl> (raw)
In-Reply-To: <20090706090207.GB3065@ami.dom.local>
Jarek Poplawski pisze:
> On Mon, Jul 06, 2009 at 01:53:49AM +0200, Paweł Staszewski wrote:
> ...
>
>> So i make tests with changing sync_pages
>> And
>>
>> ####################################
>> sync_pages: 64
>> total size reach maximum in 17sec
>>
> ...
>
>> ######################################
>> sync_pages: 128
>> Fib trie Total size reach max in 14sec
>>
> ...
>
>> #########################################
>> sync_pages: 256
>> hmm no difference also in 10sec
>>
>
> 14 == 10!? ;-)
> ...
>
>> And with sync_pages higher that 256 time of filling kernel routes is the
>> same approx 10sec.
>>
>
> Hmm... So, it's better than I expected; syncing after 128 or 256 pages
> could be quite reasonable. But then it would be interesting to find
> out if with such a safety we could go back to more aggressive values
> for possibly better performance. So here is 'the same' patch (so the
> previous, take 8, should be reverted), but with additional possibility
> to change:
> /sys/module/fib_trie/parameters/inflate_threshold_root
>
> I guess, you could try e.g. if: sync_pages 256, inflate_threshold_root 15
> can give faster lookups (or lower cpu loads); with this these inflate
> warnings could be back btw.; or maybe you'll find something in between
> like inflate_threshold_root 20 is optimal for you. (I think it should be
> enough to try this only for PREEMPT_NONE unless you have spare time ;-)
>
> Thanks,
> Jarek P.
> ---> (synchronize take 9; apply on top of the 2.6.29.x with the last
> all-in-one patch, or net-2.6)
>
>
Applied to 2.6.29.5 preempt/no-preempt and tested: - with preempt i make
only one test with sync_pages = 256 to check that is working :)
So here are some tests for different sync_pages size.
echo 1 > /sys/module/fib_trie/parameters/sync_pages
I stop count after 1minute - total size still rising :)
echo 2 > /sys/module/fib_trie/parameters/sync_pages
Total size in fib_triestats reach maximum in 33sec
echo 3 > /sys/module/fib_trie/parameters/sync_pages
Total size reach max in 31sec
echo 4 > /sys/module/fib_trie/parameters/sync_pages
Total size reach max in 23sec
echo 8 > /sys/module/fib_trie/parameters/sync_pages
Total size reach max in 17sec
echo 16 > /sys/module/fib_trie/parameters/sync_pages
Total size reach max in 14 sec
echo 32 > /sys/module/fib_trie/parameters/sync_pages
Total size reach max in 14 sec
So i see in prev tests i make something wrong in time counting
So i modify test script and make tests again:
echo 64 > /sys/module/fib_trie/parameters/sync_pages
Total size reach max in 13 sec
echo 128 > /sys/module/fib_trie/parameters/sync_pages
Total size reach max in 10 sec
echo 256 > /sys/module/fib_trie/parameters/sync_pages
Total size reach max in 10 sec
And for sync_paqges >256 time for propagating routes is always 10sec.
Also today i have many messages in dmesg like this:
Fix inflate_threshold_root. Now=25 size=11 bits
:)
And after tune :
/sys/module/fib_trie/parameters/inflate_threshold_root
no more info :)
Regards
Paweł Staszewski
> net/ipv4/fib_trie.c | 18 ++++++++++++++++--
> 1 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
> index 00a54b2..e8fca11 100644
> --- a/net/ipv4/fib_trie.c
> +++ b/net/ipv4/fib_trie.c
> @@ -71,6 +71,7 @@
> #include <linux/netlink.h>
> #include <linux/init.h>
> #include <linux/list.h>
> +#include <linux/moduleparam.h>
> #include <net/net_namespace.h>
> #include <net/ip.h>
> #include <net/protocol.h>
> @@ -164,6 +165,10 @@ static struct tnode *inflate(struct trie *t, struct tnode *tn);
> static struct tnode *halve(struct trie *t, struct tnode *tn);
> /* tnodes to free after resize(); protected by RTNL */
> static struct tnode *tnode_free_head;
> +static size_t tnode_free_size;
> +
> +static int sync_pages __read_mostly = 1000;
> +module_param(sync_pages, int, 0640);
>
> static struct kmem_cache *fn_alias_kmem __read_mostly;
> static struct kmem_cache *trie_leaf_kmem __read_mostly;
> @@ -316,9 +321,11 @@ static inline void check_tnode(const struct tnode *tn)
>
> static const int halve_threshold = 25;
> static const int inflate_threshold = 50;
> -static const int halve_threshold_root = 15;
> -static const int inflate_threshold_root = 25;
>
> +static int inflate_threshold_root __read_mostly = 25;
> +module_param(inflate_threshold_root, int, 0640);
> +
> +#define halve_threshold_root (inflate_threshold_root / 2 + 1)
>
> static void __alias_free_mem(struct rcu_head *head)
> {
> @@ -393,6 +400,8 @@ static void tnode_free_safe(struct tnode *tn)
> BUG_ON(IS_LEAF(tn));
> tn->tnode_free = tnode_free_head;
> tnode_free_head = tn;
> + tnode_free_size += sizeof(struct tnode) +
> + (sizeof(struct node *) << tn->bits);
> }
>
> static void tnode_free_flush(void)
> @@ -404,6 +413,11 @@ static void tnode_free_flush(void)
> tn->tnode_free = NULL;
> tnode_free(tn);
> }
> +
> + if (tnode_free_size >= PAGE_SIZE * sync_pages) {
> + tnode_free_size = 0;
> + synchronize_rcu();
> + }
> }
>
> static struct leaf *leaf_new(void)
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
next prev parent reply other threads:[~2009-07-07 22:56 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-25 15:48 rib_trie / Fix inflate_threshold_root. Now=15 size=11 bits Paweł Staszewski
2009-06-25 21:19 ` Eric Dumazet
2009-06-25 21:52 ` Paweł Staszewski
2009-06-25 22:54 ` Eric Dumazet
2009-06-26 10:06 ` Paweł Staszewski
2009-06-26 10:34 ` Eric Dumazet
2009-06-26 10:47 ` Paweł Staszewski
2009-06-26 10:52 ` Eric Dumazet
2009-06-26 17:26 ` Paweł Staszewski
2009-06-26 8:03 ` Jarek Poplawski
2009-06-26 9:19 ` Robert Olsson
2009-06-26 9:37 ` Jarek Poplawski
2009-06-26 10:26 ` Jorge Boncompte [DTI2]
2009-06-26 12:42 ` Robert Olsson
2009-06-26 12:54 ` Jarek Poplawski
2009-06-26 13:28 ` Jarek Poplawski
2009-06-26 13:52 ` Robert Olsson
2009-06-26 15:10 ` Jarek Poplawski
2009-06-26 15:30 ` Paul E. McKenney
2009-06-26 15:54 ` Jarek Poplawski
2009-06-26 16:15 ` Jarek Poplawski
2009-06-26 16:23 ` Paul E. McKenney
2009-06-26 16:45 ` Jarek Poplawski
2009-06-26 17:05 ` Paul E. McKenney
2009-06-26 18:05 ` Jarek Poplawski
2009-06-26 18:21 ` Paul E. McKenney
2009-06-26 20:19 ` Jarek Poplawski
2009-06-26 20:26 ` Robert Olsson
2009-06-26 20:37 ` Jarek Poplawski
2009-06-26 21:20 ` Jarek Poplawski
2009-06-27 19:20 ` Jarek Poplawski
2009-06-27 20:51 ` Jarek Poplawski
2009-06-28 0:28 ` Paweł Staszewski
2009-06-28 11:11 ` Robert Olsson
2009-06-29 7:57 ` Paweł Staszewski
2009-06-28 11:04 ` Robert Olsson
2009-06-28 12:03 ` Jarek Poplawski
2009-06-28 14:35 ` Jarek Poplawski
2009-06-28 15:32 ` Paweł Staszewski
2009-06-28 15:48 ` Paweł Staszewski
2009-06-28 19:56 ` Jarek Poplawski
2009-06-28 21:36 ` Jarek Poplawski
2009-06-29 8:08 ` Paweł Staszewski
2009-06-29 8:47 ` Paweł Staszewski
2009-06-29 9:27 ` Jarek Poplawski
2009-06-29 9:43 ` Paweł Staszewski
2009-06-29 8:33 ` [PATCH net-2.6] " Jarek Poplawski
2009-06-29 9:51 ` Paweł Staszewski
2009-06-29 10:47 ` Jarek Poplawski
2009-06-29 16:24 ` Paweł Staszewski
2009-06-29 17:09 ` Jarek Poplawski
2009-06-30 7:09 ` Jarek Poplawski
2009-06-30 20:16 ` Paweł Staszewski
2009-06-30 20:41 ` Jarek Poplawski
2009-06-30 23:31 ` Paweł Staszewski
2009-07-01 6:36 ` Jarek Poplawski
[not found] ` <20090701072409.GA12592@ff.dom.local>
2009-07-01 9:43 ` Paweł Staszewski
2009-07-01 9:50 ` Paweł Staszewski
2009-07-01 10:13 ` Jarek Poplawski
2009-07-01 11:04 ` Jarek Poplawski
2009-07-01 22:17 ` Paweł Staszewski
2009-07-02 5:32 ` Jarek Poplawski
2009-07-02 5:43 ` Paweł Staszewski
2009-07-02 6:00 ` Jarek Poplawski
2009-07-02 15:31 ` Robert Olsson
2009-07-02 19:06 ` Jarek Poplawski
2009-07-02 21:32 ` Robert Olsson
2009-07-02 22:13 ` Jarek Poplawski
2009-07-05 0:26 ` Paweł Staszewski
2009-07-05 0:30 ` Paweł Staszewski
2009-07-05 16:20 ` Jarek Poplawski
2009-07-05 17:32 ` Jarek Poplawski
2009-07-05 21:32 ` Paul E. McKenney
2009-07-05 22:23 ` Jarek Poplawski
2009-07-05 23:53 ` Paweł Staszewski
2009-07-06 9:02 ` Jarek Poplawski
2009-07-07 22:56 ` Paweł Staszewski [this message]
2009-07-07 23:50 ` Jarek Poplawski
2009-07-09 20:34 ` Paweł Staszewski
2009-07-14 19:41 ` [PATCH net-next] " Jarek Poplawski
2009-07-15 7:43 ` Robert Olsson
2009-07-15 13:05 ` Jarek Poplawski
2009-07-17 8:08 ` Robert Olsson
2009-07-20 14:41 ` David Miller
2009-07-07 23:23 ` [PATCH net-2.6] " Paweł Staszewski
2009-07-07 23:30 ` Paweł Staszewski
2009-07-14 18:33 ` [PATCH net-next] " Jarek Poplawski
2009-07-20 14:41 ` David Miller
2009-07-14 21:20 ` [PATCH net-next] ipv4: fib_trie: Use tnode_get_child_rcu() and node_parent_rcu() in lookups Jarek Poplawski
2009-07-20 14:41 ` David Miller
2009-07-05 0:31 ` [PATCH net-2.6] Re: rib_trie / Fix inflate_threshold_root. Now=15 size=11 bits Paweł Staszewski
2009-07-05 12:56 ` [PATCH -stable] " Jarek Poplawski
2009-07-05 13:08 ` [PATCH v2 " Jarek Poplawski
2009-07-08 2:42 ` David Miller
2009-07-08 6:44 ` Jarek Poplawski
2009-06-29 10:58 ` [PATCH net-2.6] " Jarek Poplawski
2009-06-30 19:48 ` David Miller
2009-06-30 20:14 ` Jarek Poplawski
2009-07-10 15:29 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A53D28D.8060409@itcare.pl \
--to=pstaszewski@itcare.pl \
--cc=jarkao2@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=paulmck@linux.vnet.ibm.com \
--cc=robert@robur.slu.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).