Re: [PATCH 4/7] vbus-proxy: add a pci-to-vbus bridge

[Gregory Haskins <ghaskins@novell.com>]

[-- Attachment #1: Type: text/plain, Size: 1137 bytes --]

Ira W. Snyder wrote:

<big snip>

> With my powerpc hardware, it should be easily possible to have at least
> 6 devices, each with two virtqueues, one for tx and one for rx. (The
> limit is caused by the amount of distinct kick() events I can generate.)
> This could allow many combinations of devices, such as:
> 
> * 1 virtio-net, 1 virtio-console
> * 3 virtio-net, 2 virtio-console
> * 6 virtio-net
> * etc.

Note that the vbus "connector" design abstract details such as kick
events, so you are not limited by the number of physical interrupts of
your hardware, per se.

You can actually have an arbitrary width namespace for your virtqueues
running over a single interrupt, if you were so inclined.  (Note you can
also have a 1:1 with interrupts if you like, too)

If you look at the design of the vbus-pcibridge connector, it actually
aggregates the entire namespace into between 1 and 8 interrupts
(depending on availability, and separated by priority level).  If
multiple vectors are not available, the entire protocol can fallback to
run over a single vector when necessary.

Kind Regards,
-Greg


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 267 bytes --]