netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eric Dumazet <eric.dumazet@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Damian Lukowski <damian@tvk.rwth-aachen.de>,
	Netdev <netdev@vger.kernel.org>
Subject: Re: [PATCH 3/3] Revert Backoff [v3]: Calculate TCP's connection close threshold as a time value.
Date: Mon, 31 Aug 2009 16:04:11 +0200	[thread overview]
Message-ID: <4A9BD85B.9070708@gmail.com> (raw)
In-Reply-To: <4A9BD7AB.7060207@gmail.com>

Eric Dumazet a écrit :
> Damian Lukowski a écrit :
>> RFC 1122 specifies two threshold values R1 and R2 for connection timeouts,
>> which may represent a number of allowed retransmissions or a timeout value.
>> Currently linux uses sysctl_tcp_retries{1,2} to specify the thresholds
>> in number of allowed retransmissions.
>>
>> For any desired threshold R2 (by means of time) one can specify tcp_retries2
>> (by means of number of retransmissions) such that TCP will not time out
>> earlier than R2. This is the case, because the RTO schedule follows a fixed
>> pattern, namely exponential backoff.
>>
>> However, the RTO behaviour is not predictable any more if RTO backoffs can be
>> reverted, as it is the case in the draft
>> "Make TCP more Robust to Long Connectivity Disruptions"
>> (http://tools.ietf.org/html/draft-zimmermann-tcp-lcd).
>>
>> In the worst case TCP would time out a connection after 3.2 seconds, if the
>> initial RTO equaled MIN_RTO and each backoff has been reverted.
>>
>> This patch introduces a function retransmits_timed_out(N),
>> which calculates the timeout of a TCP connection, assuming an initial
>> RTO of MIN_RTO and N unsuccessful, exponentially backed-off retransmissions.
>>
>> Whenever timeout decisions are made by comparing the retransmission counter
>> to some value N, this function can be used, instead.
>>
>> The meaning of tcp_retries2 will be changed, as many more RTO retransmissions
>> can occur than the value indicates. However, it yields a timeout which is
>> similar to the one of an unpatched, exponentially backing off TCP in the same
>> scenario. As no application could rely on an RTO greater than MIN_RTO, there
>> should be no risk of a regression.
>>
>> Signed-off-by: Damian Lukowski <damian@tvk.rwth-aachen.de>
>> ---
>>  include/net/tcp.h    |   18 ++++++++++++++++++
>>  net/ipv4/tcp_timer.c |   11 +++++++----
>>  2 files changed, 25 insertions(+), 4 deletions(-)
>>
>> diff --git a/include/net/tcp.h b/include/net/tcp.h
>> index c35b329..17d1a88 100644
>> --- a/include/net/tcp.h
>> +++ b/include/net/tcp.h
>> @@ -1247,6 +1247,24 @@ static inline struct sk_buff *tcp_write_queue_prev(struct sock *sk, struct sk_bu
>>  #define tcp_for_write_queue_from_safe(skb, tmp, sk)			\
>>  	skb_queue_walk_from_safe(&(sk)->sk_write_queue, skb, tmp)
>>  
>> +static inline bool retransmits_timed_out(const struct sock *sk,
>> +					 unsigned int boundary)
>> +{
>> +	int limit, K;
>> +	if (!inet_csk(sk)->icsk_retransmits)
>> +		return false;
>> +
>> +	K = ilog2(TCP_RTO_MAX/TCP_RTO_MIN);
>> +
>> +	if (boundary <= K)
>> +		limit = ((2 << boundary) - 1) * TCP_RTO_MIN;
>> +	else
>> +		limit = ((2 << K) - 1) * TCP_RTO_MIN +
>> +			(boundary - K) * TCP_RTO_MAX;
> 
> Doing this computation might allow us to respect RFC 1122 here :
>  
> "The value of R2 SHOULD correspond to at least 100 seconds."
> 
> adding a third parameter to retransmits_timed_out(), min_limit,
> being 100*HZ if sysctl_tcp_retries2 was used...
> 
> limit = min(min_limit, limit);
> 

Oh well, typical min/max error, sorry :)

> 
>> +
>> +	return (tcp_time_stamp - tcp_sk(sk)->retrans_stamp) >= limit;
>> +}
>> +
>>  static inline struct sk_buff *tcp_send_head(struct sock *sk)
>>  {
>>  	return sk->sk_send_head;
>> diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
>> index a3ba494..2972d7b 100644
>> --- a/net/ipv4/tcp_timer.c
>> +++ b/net/ipv4/tcp_timer.c
>> @@ -137,13 +137,14 @@ static int tcp_write_timeout(struct sock *sk)
>>  {
>>  	struct inet_connection_sock *icsk = inet_csk(sk);
>>  	int retry_until;
>> +	bool do_reset;
>>  
>>  	if ((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV)) {
>>  		if (icsk->icsk_retransmits)
>>  			dst_negative_advice(&sk->sk_dst_cache);
>>  		retry_until = icsk->icsk_syn_retries ? : sysctl_tcp_syn_retries;
>>  	} else {
>> -		if (icsk->icsk_retransmits >= sysctl_tcp_retries1) {
>> +		if (retransmits_timed_out(sk, sysctl_tcp_retries1)) {
>>  			/* Black hole detection */
>>  			tcp_mtu_probing(icsk, sk);
>>  
>> @@ -155,13 +156,15 @@ static int tcp_write_timeout(struct sock *sk)
>>  			const int alive = (icsk->icsk_rto < TCP_RTO_MAX);
>>  
>>  			retry_until = tcp_orphan_retries(sk, alive);
>> +			do_reset = alive ||
>> +				   !retransmits_timed_out(sk, retry_until);
>>  
>> -			if (tcp_out_of_resources(sk, alive || icsk->icsk_retransmits < retry_until))
>> +			if (tcp_out_of_resources(sk, do_reset))
>>  				return 1;
>>  		}
>>  	}
>>  
>> -	if (icsk->icsk_retransmits >= retry_until) {
>> +	if (retransmits_timed_out(sk, retry_until)) {
>>  		/* Has it gone just too far? */
>>  		tcp_write_err(sk);
>>  		return 1;
>> @@ -385,7 +388,7 @@ void tcp_retransmit_timer(struct sock *sk)
>>  out_reset_timer:
>>  	icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX);
>>  	inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, icsk->icsk_rto, TCP_RTO_MAX);
>> -	if (icsk->icsk_retransmits > sysctl_tcp_retries1)
>> +	if (retransmits_timed_out(sk, sysctl_tcp_retries1 + 1))
>>  		__sk_dst_reset(sk);
>>  
>>  out:;
> 
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 


  reply	other threads:[~2009-08-31 14:04 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-26 10:16 [PATCH 3/3] Revert Backoff [v3]: Calculate TCP's connection close threshold as a time value Damian Lukowski
2009-08-31 13:26 ` Ilpo Järvinen
2009-09-01 11:28   ` Damian Lukowski
2009-09-01 13:41     ` Ilpo Järvinen
2009-08-31 14:01 ` Eric Dumazet
2009-08-31 14:04   ` Eric Dumazet [this message]
2009-09-01 11:49   ` Damian Lukowski
2009-09-01 12:25     ` Eric Dumazet
2009-09-01 13:23       ` Ilpo Järvinen
     [not found] ` <CAFbMe2Mu46N8kRrYkGzYRLuntEd2J9aO_d0Jw_y0gsQA4q-qHw@mail.gmail.com>
2012-06-01 22:58   ` Jerry Chu
2012-06-04 17:50     ` Damian Lukowski
2012-06-04 19:18       ` Ilpo Järvinen
2012-06-04 23:57         ` Jerry Chu
2012-06-04 23:50       ` Jerry Chu
2012-06-05 17:42         ` Jerry Chu
2012-06-05 18:39           ` Damian Lukowski
2012-06-05 21:22             ` Jerry Chu
2012-06-06 20:35               ` Damian Lukowski
2012-06-06 22:41                 ` Yuchung Cheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A9BD85B.9070708@gmail.com \
    --to=eric.dumazet@gmail.com \
    --cc=damian@tvk.rwth-aachen.de \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).