From: David Daney <ddaney@caviumnetworks.com>
To: Ralf Baechle <ralf@linux-mips.org>,
linux-mips <linux-mips@linux-mips.org>,
netdev@vger.kernel.org
Subject: [PATCH 0/6] netdev: Octeon MGMT new driver + octeon_ethernet updates (v2).
Date: Wed, 14 Oct 2009 12:02:50 -0700 [thread overview]
Message-ID: <4AD6205A.8070200@caviumnetworks.com> (raw)
This is the second version of this patch set. The only difference
from the first version is that some unrelated changes have been
factored out of 6/6.
The main thrust of this patch set is to add a driver for the Cavium
Networks Octeon processor's MII (Management port) Ethernet devices.
Since it shares an mdio bus with the existing octeon-ethernet driver,
there is also some rearrangement of that code.
The Octeon SOC has an mdio bus that is shared by the PHYs of all the
Ethernet ports on the chip. Patches 1/6 and 2/6 add a stand-alone
driver for the shared mdio bus
3/6 adds platform devices for the octeon_mgmt devices.
4/6 has the register definitions needed by the driver.
5/6 the octeon_mgmt driver proper
6/6 converts octeon_ethernet to use the PHYs on the shared mdio bus.
davem acked the non-mips parts (Thank You davem) and since the Octeon
is a mips based device, we will be merging these patches via Ralf's
tree.
I will reply with the 6 patches.
David Daney (6):
MIPS: Octeon: Add platform device for MDIO buses.
net: Add driver for Octeon MDIO buses.
MIPS: Octeon: Add platform devices MGMT Ethernet ports.
MIPS: Octeon: Add register definitions for MGMT Ethernet driver.
netdev: Add Ethernet driver for Octeon MGMT devices.
Staging: octeon-ethernet: Convert to use PHY Abstraction Layer.
arch/mips/cavium-octeon/octeon-platform.c | 88 ++
arch/mips/include/asm/octeon/cvmx-agl-defs.h | 1194
+++++++++++++++++++++++++
arch/mips/include/asm/octeon/cvmx-mixx-defs.h | 248 +++++
arch/mips/include/asm/octeon/cvmx-smix-defs.h | 178 ++++
drivers/net/Kconfig | 2 +
drivers/net/Makefile | 2 +
drivers/net/octeon/Kconfig | 10 +
drivers/net/octeon/Makefile | 2 +
drivers/net/octeon/octeon_mgmt.c | 1175
++++++++++++++++++++++++
drivers/net/phy/Kconfig | 11 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-octeon.c | 180 ++++
drivers/staging/octeon/Kconfig | 3 +-
drivers/staging/octeon/ethernet-mdio.c | 204 ++---
drivers/staging/octeon/ethernet-mdio.h | 2 +-
drivers/staging/octeon/ethernet-proc.c | 112 ---
drivers/staging/octeon/ethernet-rgmii.c | 52 +-
drivers/staging/octeon/ethernet-sgmii.c | 2 +-
drivers/staging/octeon/ethernet-xaui.c | 2 +-
drivers/staging/octeon/ethernet.c | 23 +-
drivers/staging/octeon/octeon-ethernet.h | 6 +-
21 files changed, 3216 insertions(+), 281 deletions(-)
create mode 100644 arch/mips/include/asm/octeon/cvmx-agl-defs.h
create mode 100644 arch/mips/include/asm/octeon/cvmx-mixx-defs.h
create mode 100644 arch/mips/include/asm/octeon/cvmx-smix-defs.h
create mode 100644 drivers/net/octeon/Kconfig
create mode 100644 drivers/net/octeon/Makefile
create mode 100644 drivers/net/octeon/octeon_mgmt.c
create mode 100644 drivers/net/phy/mdio-octeon.c
next reply other threads:[~2009-10-14 19:03 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-14 19:02 David Daney [this message]
2009-10-14 19:04 ` [PATCH 1/6] MIPS: Octeon: Add platform device for MDIO buses David Daney
2009-10-14 19:22 ` Ralf Baechle
2009-10-14 19:04 ` [PATCH 2/6] net: Add driver for Octeon " David Daney
2009-10-14 19:22 ` Ralf Baechle
2009-10-14 19:04 ` [PATCH 3/6] MIPS: Octeon: Add platform devices MGMT Ethernet ports David Daney
2009-10-14 19:22 ` Ralf Baechle
2009-10-14 19:04 ` [PATCH 4/6] MIPS: Octeon: Add register definitions for MGMT Ethernet driver David Daney
2009-10-14 19:22 ` Ralf Baechle
2009-10-14 19:04 ` [PATCH 5/6] netdev: Add Ethernet driver for Octeon MGMT devices David Daney
2009-10-14 19:23 ` Ralf Baechle
2009-10-14 19:04 ` [PATCH 6/6] Staging: octeon-ethernet: Convert to use PHY Abstraction Layer David Daney
2009-10-14 19:23 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AD6205A.8070200@caviumnetworks.com \
--to=ddaney@caviumnetworks.com \
--cc=linux-mips@linux-mips.org \
--cc=netdev@vger.kernel.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).