Re: [PATCH] e1000: the power down when running ifdown command

[Naohiro Ooiwa <nooiwa@miraclelinux.com>]

Jeff Kirsher wrote:
> 2009/11/3 Naohiro Ooiwa <nooiwa@miraclelinux.com>:
>> Jeff Kirsher wrote:
>>> 2009/10/31 Naohiro Ooiwa <nooiwa@miraclelinux.com>:
>>>
>>> I have added this patch to my tree for testing.  This patch requires a
>>> fair amount of regression testing, so once its passed testing I will
>>> push the patch to David/netdev.
>> I appreciate the marge your tree.
>> If there is anything I can do, please let me know.
>>
>> And I know this patch is good for e100 driver too.
>> I would really like to create patch for it.
>> How do you think about e100 driver.
>>
>>
>> Thanks,
>> Naohiro Ooiwa
>>
> 
> Patches are always welcome (referring to a e100 patch).

I am happy that you should say that.
I will try to create a patch for e100, e1000e, igb and ixgbe.
Before that, I should fix the following problems.


> As far as the e1000 patch goes, it has a number of issues which were
> found in testing.  Here are just a few problems we saw:
> 1. ethtool -t - crashes the system
> 2. ethtool eth0 - always shows link/speed as 1000/Full even when there
> is no cable
> 3. ethtool -s eth0 autoneg on/off - system hang. Sometimes a copper
> interface will show up as fiber after this.
> 4. ethtool -d/-S/-g etc - will corrupt the stats of the interface
> while doing ifup/down

Thank you for your tests.
Oh, My patch is full of problem.
The rest is my work.

I will resend the patch after test of all ethtool's options.
At that time, I will tell you contents of my tests.

And I sad WOL works on my patch in previous mail.
But WOL doesn't work. Sorry, I wasn't myself.
I will fix it too.

> 
> So it appears that more needs to be done to the driver to get this to
> work as expected.
> 
> NAK
>