From: Troy Kisky <troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
To: Sriramakrishnan <srk-l0cyMroinI0@public.gmane.org>
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org
Subject: Re: [PATCH 2/3] TI Davinci EMAC : add platform specific interrupt enable/disable logic.
Date: Wed, 18 Nov 2009 12:08:24 -0700 [thread overview]
Message-ID: <4B044628.9030701@boundarydevices.com> (raw)
In-Reply-To: <1258537328-31527-3-git-send-email-srk-l0cyMroinI0@public.gmane.org>
Sriramakrishnan wrote:
> On certain SOCs, the EMAC controller is interfaced with a wrapper logic
> for handling interrupts. This patch implements a platform
> specific hook to cater to platforms that require custom interrupt
> handling logic
>
> Signed-off-by: Sriramakrishnan <srk-l0cyMroinI0@public.gmane.org>
> Acked-by: Chaithrika U S <chaithrika-l0cyMroinI0@public.gmane.org>
> ---
> drivers/net/davinci_emac.c | 11 +++++++++++
> include/linux/davinci_emac.h | 2 ++
> 2 files changed, 13 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
> index 6aec8f5..81931f8 100644
> --- a/drivers/net/davinci_emac.c
> +++ b/drivers/net/davinci_emac.c
> @@ -487,6 +487,9 @@ struct emac_priv {
> struct mii_bus *mii_bus;
> struct phy_device *phydev;
> spinlock_t lock;
> + /*platform specific members*/
> + void (*wrapper_int_enable) (void);
> + void (*wrapper_int_disable) (void);
Would platform_int_enable be more appropriate then wrapper_int_enable ?
> };
>
> /* clock frequency for EMAC */
> @@ -1001,6 +1004,8 @@ static void emac_int_disable(struct emac_priv *priv)
> emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0);
> emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0);
> /* NOTE: Rx Threshold and Misc interrupts are not disabled */
> + if (priv->wrapper_int_disable)
> + priv->wrapper_int_disable();
>
> local_irq_restore(flags);
>
> @@ -1020,6 +1025,9 @@ static void emac_int_disable(struct emac_priv *priv)
> static void emac_int_enable(struct emac_priv *priv)
> {
> if (priv->version == EMAC_VERSION_2) {
> + if (priv->wrapper_int_enable)
> + priv->wrapper_int_enable();
> +
> emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff);
> emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff);
>
> @@ -2662,6 +2670,9 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
> priv->phy_mask = pdata->phy_mask;
> priv->rmii_en = pdata->rmii_en;
> priv->version = pdata->version;
> + priv->wrapper_int_enable = pdata->wrapper_interrupt_enable;
> + priv->wrapper_int_disable = pdata->wrapper_interrupt_disable;
> +
> emac_dev = &ndev->dev;
> /* Get EMAC platform data */
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
> index ff55487..eb24dc0 100644
> --- a/include/linux/davinci_emac.h
> +++ b/include/linux/davinci_emac.h
> @@ -25,6 +25,8 @@ struct emac_platform_data {
> u32 mdio_max_freq;
> u8 rmii_en;
> u8 version;
> + void (*wrapper_interrupt_enable) (void);
> + void (*wrapper_interrupt_disable) (void);
> };
>
> enum {
next prev parent reply other threads:[~2009-11-18 19:08 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-18 9:42 [PATCH 0/3] TI EMAC driver : Make driver re-usable on non-davinci platforms Sriramakrishnan
2009-11-18 9:42 ` [PATCH 1/3] TI Davinci EMAC : Re-use driver for other platforms Sriramakrishnan
2009-11-18 9:42 ` [PATCH 2/3] TI Davinci EMAC : add platform specific interrupt enable/disable logic Sriramakrishnan
2009-11-18 9:42 ` [PATCH 3/3] TI Davinci EMAC : Abstract Buffer address translation logic Sriramakrishnan
2009-11-18 19:15 ` Troy Kisky
[not found] ` <1258537328-31527-3-git-send-email-srk-l0cyMroinI0@public.gmane.org>
2009-11-18 19:08 ` Troy Kisky [this message]
2009-11-18 22:29 ` [PATCH 2/3] TI Davinci EMAC : add platform specific interrupt enable/disable logic Kevin Hilman
2009-11-18 13:12 ` [PATCH 0/3] TI EMAC driver : Make driver re-usable on non-davinci platforms David Miller
2009-11-18 17:53 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B044628.9030701@boundarydevices.com \
--to=troy.kisky-q5rjgjkts06cy9shamctrueocmrvltnr@public.gmane.org \
--cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=srk-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).