Re: RFC: ethtool: add device-specific feature support in a generic fashion

[Ben Greear <greearb@candelatech.com>]

On 12/12/2009 06:33 PM, Peter P Waskiewicz Jr wrote:
> This is a follow-up to my first RFC, getting opinions where the best
> place to put device-specific feature toggling would be.  The feedback I
> received was to look at doing this in ethtool.  Below is a high-level
> design of what I'd like to do, and wanted to vet this with the community
> to see if this is aligned with what people would like to see.
>
> The general idea is to have a generic framework in ethtool to enumerate
> device-specific commands.  A sample structure that would represent each
> of these commands is:
>
> 	enum oem_cmds {
> 		OEM_CMD_0 = 0,
> 		OEM_CMD_1,
> 		OEM_CMD_2,
> 	...
> 	etc.
> 	...
> 	};
>
> 	struct oem_feature_cmd {
> 		/* Description of the feature */
> 		char *description;
>
> 		/* Does the feature toggling requires a device reset */
> 		u8 require_reset;
>
> 		/* The command-line name for the command */
> 		char *oem_cmd_name;
>
> 		/* The command number assigned to this */
> 		u32 oem_cmd;
>
> 		/* value for the command */
> 		u32 oem_cmd_val;
> 	};

I'd add a 32-bit field for flags, with require_reset being one of them.  I'd also
align it so that it has no holes on 32/64 bit (put char*'s next to each other, maybe
pad with another 32-bit 'spare' field.  Maybe even use uint64 for the pointers so
that the struct size is same on 32-bit and 64-bit, to aid using 32-bit apps on
64-bit OS easily.

This way, as new uses are found for this, the structure remains binary compatible.

Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com