* Re: [Bugme-new] [Bug 15239] New: Problem with network performance after a while.
2010-02-08 23:06 ` Brandeburg, Jesse
2010-02-08 23:14 ` David Miller
@ 2010-02-09 7:37 ` Paweł Staszewski
1 sibling, 0 replies; 11+ messages in thread
From: Paweł Staszewski @ 2010-02-09 7:37 UTC (permalink / raw)
To: Brandeburg, Jesse
Cc: Andrew Morton, netdev@vger.kernel.org,
e1000-devel@lists.sourceforge.net,
bugzilla-daemon@bugzilla.kernel.org,
bugme-daemon@bugzilla.kernel.org, Kirsher, Jeffrey T,
Allan, Bruce W, Duyck, Alexander H, Waskiewicz Jr, Peter P,
Ronciak, John, pstaszewski@artcom.pl, stable@kernel.org
[-- Attachment #1: Type: text/plain, Size: 8794 bytes --]
W dniu 2010-02-09 00:06, Brandeburg, Jesse pisze:
> Andrew, thanks.
>
> On Mon, 8 Feb 2010, Andrew Morton wrote:
>
>>> Hello the problem is that after some time of working my router have some
>>> performance problems.
>>>
>>> The problem exist on kernel 2.6.32.7 and 2.6.33-rc6-git5
>>> The problem dont exist on 2.6.32.2 kernel.
>>>
>> That would be bad. That's a regression in 2.6.33-rc, and we've
>> backported that regression into 2.6.32.x -stable.
>>
> there were no changes to e1000e from v2.6.32..v2.6.32.7
> # git whatchanged v2.6.32..v2.6.32.7 drivers/net/e1000e
>
>
>
>>> on 2.6.33-rc6-git5 i have this info:
>>>
>
>>> BUG: soft lockup - CPU#1 stuck for 61s!
>>> [events/1:28]
>>>
> so why is this events/1 thing here? I've see this kernel thread related
> to ipv6 stack hanging when under heavy incoming packet load as the
> interface comes up. Was the interface just brought up or something
> changed in rules or something?
>
>
>>> Modules linked in:
>>> CPU 1
>>> Pid: 28, comm: events/1 Not tainted 2.6.33-rc6-git5 #1 X7DCT/X7DCT
>>> RIP: 0010:[<ffffffff810a3d89>] [<ffffffff810a3d89>]
>>> kmem_cache_free+0x11b/0x11c
>>> RSP: 0018:ffff880028243e50 EFLAGS: 00000292
>>> RAX: 0000000000000032 RBX: 000000000000007d RCX: ffff8803190683c0
>>> RDX: 0000000000000031 RSI: ffff8803190683c0 RDI: ffff88031f83e680
>>> RBP: ffffffff81002893 R08: 0000000000000000 R09: 000000000000007c
>>> R10: ffff88030d776800 R11: ffff88030d7768a0 R12: ffff880028243dd0
>>> R13: ffffc900008b2f80 R14: ffff88031fa7c800 R15: ffffffff81012da7
>>> FS: 0000000000000000(0000) GS:ffff880028240000(0000) knlGS:0000000000000000
>>> CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>>> CR2: 00007fd61d5bd000 CR3: 000000031e55c000 CR4: 00000000000006a0
>>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>>> Process events/1 (pid: 28, threadinfo ffff88031f9c8000, task ffff88031f9a4f80)
>>> Stack:
>>> ffffffff8126826f ffff88031faa4600 ffffffff8126834a 000096ba00000023
>>> <0> 01ffc90000000024 ffff88031fbb4000 ffff88031faa4600 0000000000000040
>>> <0> 0000000000000040 ffff88031faa4788 ffff88031faa4600 0000000000000740
>>> Call Trace:
>>> <IRQ>
>>> [<ffffffff8126826f>] ? e1000_put_txbuf+0x62/0x74
>>> [<ffffffff8126834a>] ? e1000_clean_tx_irq+0xc9/0x235
>>>
> clean_tx_irq in e1000e has a break-out condition to keep the transmit
> cleanup for running forever (if another cpu is transmitting) so it seems
> that something else must have happened. Can kmem_cache_free sleep or
> stall on a lock?
>
>
>
>>> [<ffffffff8126b71b>] ? e1000_clean+0x5c/0x21c
>>> [<ffffffff812f29a3>] ? net_rx_action+0x71/0x15d
>>> [<ffffffff81035311>] ? __do_softirq+0xd7/0x196
>>> [<ffffffff81002dac>] ? call_softirq+0x1c/0x28
>>> [<ffffffff812f768f>] ? dst_gc_task+0x0/0x1a7
>>> [<ffffffff81002dac>] ? call_softirq+0x1c/0x28
>>> <EOI>
>>> [<ffffffff81004599>] ? do_softirq+0x31/0x63
>>> [<ffffffff81034ec1>] ? local_bh_enable_ip+0x75/0x86
>>> [<ffffffff812f768f>] ? dst_gc_task+0x0/0x1a7
>>> [<ffffffff812f775d>] ? dst_gc_task+0xce/0x1a7
>>> [<ffffffff8136b08c>] ? schedule+0x82c/0x906
>>> [<ffffffff8103c44f>] ? lock_timer_base+0x26/0x4b
>>> [<ffffffff810a41d6>] ? cache_reap+0x0/0x11d
>>> [<ffffffff81044c38>] ? worker_thread+0x14c/0x1dc
>>> [<ffffffff81047dcd>] ? autoremove_wake_function+0x0/0x2e
>>> [<ffffffff81044aec>] ? worker_thread+0x0/0x1dc
>>> [<ffffffff810479bd>] ? kthread+0x79/0x81
>>> [<ffffffff81002cb4>] ? kernel_thread_helper+0x4/0x10
>>> [<ffffffff81047944>] ? kthread+0x0/0x81
>>> [<ffffffff81002cb0>] ? kernel_thread_helper+0x0/0x10
>>> Code: fe 79 4c 00 48 85 db 74 14 48 8b 74 24 10 48 89 ef ff 13 48 83 c3 08 48
>>> 83 3b 00 eb ea 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e 41 5f<c3> 55 48 89 f5 53 48
>>> 89 fb 48 83 ec 08 48 8b 76 18 48 2b 75 10
>>> Call Trace:
>>> <IRQ> [<ffffffff8126826f>] ? e1000_put_txbuf+0x62/0x74
>>> [<ffffffff8126834a>] ? e1000_clean_tx_irq+0xc9/0x235
>>> [<ffffffff8126b71b>] ? e1000_clean+0x5c/0x21c
>>> [<ffffffff812f29a3>] ? net_rx_action+0x71/0x15d
>>> [<ffffffff81035311>] ? __do_softirq+0xd7/0x196
>>> [<ffffffff81002dac>] ? call_softirq+0x1c/0x28
>>> [<ffffffff812f768f>] ? dst_gc_task+0x0/0x1a7
>>> [<ffffffff81002dac>] ? call_softirq+0x1c/0x28
>>> <EOI> [<ffffffff81004599>] ? do_softirq+0x31/0x63
>>> [<ffffffff81034ec1>] ? local_bh_enable_ip+0x75/0x86
>>> [<ffffffff812f768f>] ? dst_gc_task+0x0/0x1a7
>>> [<ffffffff812f775d>] ? dst_gc_task+0xce/0x1a7
>>> [<ffffffff8136b08c>] ? schedule+0x82c/0x906
>>> [<ffffffff8103c44f>] ? lock_timer_base+0x26/0x4b
>>> [<ffffffff810a41d6>] ? cache_reap+0x0/0x11d
>>> [<ffffffff81044c38>] ? worker_thread+0x14c/0x1dc
>>> [<ffffffff81047dcd>] ? autoremove_wake_function+0x0/0x2e
>>> [<ffffffff81044aec>] ? worker_thread+0x0/0x1dc
>>> [<ffffffff810479bd>] ? kthread+0x79/0x81
>>> [<ffffffff81002cb4>] ? kernel_thread_helper+0x4/0x10
>>> [<ffffffff81047944>] ? kthread+0x0/0x81
>>> [<ffffffff81002cb0>] ? kernel_thread_helper+0x0/0x10
>>>
>>> And on 2.6.32.7
>>> Feb 4 13:12:40 TM_01_C1 ------------[ cut here ]------------
>>> Feb 4 13:12:40 TM_01_C1 WARNING: at net/sched/sch_generic.c:261
>>> dev_watchdog+0x130/0x1d6()
>>> Feb 4 13:12:40 TM_01_C1 Hardware name: X7DCT
>>> Feb 4 13:12:40 TM_01_C1 NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed
>>> out
>>> Feb 4 13:12:40 TM_01_C1 Modules linked in: oprofile
>>> Feb 4 13:12:40 TM_01_C1 Pid: 0, comm: swapper Not tainted 2.6.32 #1
>>>
> the above doesn't match your statement that it is 2.6.32.7
>
>
>>> Feb 4 13:12:40 TM_01_C1 Call Trace:
>>> Feb 4 13:12:40 TM_01_C1<IRQ> [<ffffffff812fcaf7>] ? dev_watchdog+0x130/0x1d6
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff812fcaf7>] ? dev_watchdog+0x130/0x1d6
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff81038811>] ? warn_slowpath_common+0x77/0xa3
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff81038899>] ? warn_slowpath_fmt+0x51/0x59
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff8102897e>] ? activate_task+0x3f/0x4e
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff81034fe5>] ? try_to_wake_up+0x1eb/0x1f8
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff812eb768>] ? netdev_drivername+0x3b/0x40
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff812fcaf7>] ? dev_watchdog+0x130/0x1d6
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff8102d1e3>] ? __wake_up+0x30/0x44
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff812fc9c7>] ? dev_watchdog+0x0/0x1d6
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff810448c4>] ? run_timer_softirq+0x1ff/0x29d
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff810556ab>] ? ktime_get+0x5f/0xb7
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff8103e0fd>] ? __do_softirq+0xd7/0x196
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff8100be7c>] ? call_softirq+0x1c/0x28
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff8100d645>] ? do_softirq+0x31/0x66
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff8101b148>] ?
>>> smp_apic_timer_interrupt+0x87/0x95
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff8100b873>] ? apic_timer_interrupt+0x13/0x20
>>> Feb 4 13:12:40 TM_01_C1<EOI> [<ffffffff810111f5>] ? mwait_idle+0x9b/0xa0
>>> Feb 4 13:12:40 TM_01_C1 [<ffffffff8100a236>] ? cpu_idle+0x49/0x7c
>>> Feb 4 13:12:40 TM_01_C1 ---[ end trace c670a6a17be040e5 ]---
>>>
>>>
>>> Machine is a BGP router with some iproute traffic management.
>>>
> please send a full dmesg from boot. also full lspci -vvv.
>
>
dmesg and lspci in attached files.
> We sporadically see some issue with some people's use of traffic
> management with some e1000/e devices, we have no repro or common
> reproduction case, so haven't solved the issue yet. I suspect there is a
> strange interaction with HTB or one of the other queueing disciplines that
> causes some odd skb or set of skb's to arrive, but that is just a theory.
>
>
there is about 10000 iproute filters per interface. (hfsc classes)
> I see two different bugs above, one is the tx hang, could it be that you
> didn't have SOFTLOCKUP detection enabled on 2.6.32? A softlockup could
> cause a tx hang.
>
> The other bug is the softlockup and I don't know how the driver could be
> at fault in that listed stack path. We simply can't loop more than
> tx_ring->count times, which could never take> 60 seconds unless one of
> the calls we were making was getting stalled for some reason.
>
> So your traffic is "heavy" forwarding at the time of the failure, do you
> have any input on average packet size? I'm trying to figure out how we
> might reproduce this.
>
>
avg pkt size is about 811 bytes
> Jesse
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
[-- Attachment #2: lspci.txt --]
[-- Type: text/plain, Size: 33610 bytes --]
00:00.0 Host bridge: Intel Corporation 5100 Chipset Memory Controller Hub (rev 90)
Subsystem: Super Micro Computer Inc Device de80
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
Address: fee00000 Data: 0000
Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil+
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
00:02.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x8 Port 2-3 (rev 90) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-f80fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+
Address: feeff00c Data: 4159
Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 2e, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
00:04.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x16 Port 4-7 (rev 90) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: f8400000-f85fffff
Prefetchable memory behind bridge: 00000000f8700000-00000000f88fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+
Address: feeff00c Data: 4161
Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surpise-
Slot # 30, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Off, PwrInd Off, Power+ Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
00:08.0 System peripheral: Intel Corporation 5100 Chipset DMA Engine (rev 90)
Subsystem: Super Micro Computer Inc Device de80
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
Address: fee00000 Data: 0000
Capabilities: [6c] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
00:10.0 Host bridge: Intel Corporation 5100 Chipset FSB Registers (rev 90)
Subsystem: Super Micro Computer Inc Device de80
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.1 Host bridge: Intel Corporation 5100 Chipset FSB Registers (rev 90)
Subsystem: Super Micro Computer Inc Device de80
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.2 Host bridge: Intel Corporation 5100 Chipset FSB Registers (rev 90)
Subsystem: Super Micro Computer Inc Device de80
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:11.0 Host bridge: Intel Corporation 5100 Chipset Reserved Registers (rev 90)
Subsystem: Super Micro Computer Inc Device de80
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:13.0 Host bridge: Intel Corporation 5100 Chipset Reserved Registers (rev 90)
Subsystem: Super Micro Computer Inc Device de80
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge: Intel Corporation 5100 Chipset DDR Channel 0 Registers (rev 90)
Subsystem: Super Micro Computer Inc Device de80
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge: Intel Corporation 5100 Chipset DDR Channel 1 Registers (rev 90)
Subsystem: Super Micro Computer Inc Device de80
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Super Micro Computer Inc Device de80
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1820 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device de80
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at f8600800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: f8900000-f8afffff
Prefetchable memory behind bridge: 00000000f8b00000-00000000f8cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset+ FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+
Address: feeff00c Data: 4169
Capabilities: [90] Subsystem: Super Micro Computer Inc Device de80
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8100000-f81fffff
Prefetchable memory behind bridge: 00000000f8d00000-00000000f8efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 5, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+
Address: feeff00c Data: 4171
Capabilities: [90] Subsystem: Super Micro Computer Inc Device de80
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f8200000-f82fffff
Prefetchable memory behind bridge: 00000000f8f00000-00000000f90fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 6, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+
Address: feeff00c Data: 4179
Capabilities: [90] Subsystem: Super Micro Computer Inc Device de80
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Super Micro Computer Inc Device de80
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1840 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Super Micro Computer Inc Device de80
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 1860 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Super Micro Computer Inc Device de80
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device de80
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f8600c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f8300000-f83fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Super Micro Computer Inc Device de80
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
Subsystem: Super Micro Computer Inc Device de80
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc Device de80
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at 1c10 [size=8]
Region 1: I/O ports at 1c04 [size=4]
Region 2: I/O ports at 1c08 [size=8]
Region 3: I/O ports at 1c00 [size=4]
Region 4: I/O ports at 18a0 [size=32]
Region 5: Memory at f8600000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/16 Enable+
Address: fee0100c Data: 4181
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
Subsystem: Super Micro Computer Inc Device de80
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f8601000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
01:00.0 Ethernet controller: Intel Corporation 82598EB 10 Gigabit AT CX4 Network Connection (rev 01)
Subsystem: Super Micro Computer Inc Device af80
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f8040000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f8000000 (32-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 2000 [size=32]
Region 3: Memory at f8060000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] MSI-X: Enable+ Mask- TabSize=18
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140] Device Serial Number 66-33-d3-ff-ff-48-30-00
Kernel driver in use: ixgbe
04:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03)
Subsystem: Super Micro Computer Inc Device 108c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f8100000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 3000 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable+
Address: 00000000fee0f00c Data: 415a
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <128ns, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140] Device Serial Number 67-33-d3-ff-ff-48-30-00
Kernel driver in use: e1000e
05:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
Subsystem: Super Micro Computer Inc Device 109a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f8200000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 4000 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable+
Address: 00000000feef000c Data: 416a
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <128ns, L1 <64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140] Device Serial Number 68-33-d3-ff-ff-48-30-00
Kernel driver in use: e1000e
06:01.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller])
Subsystem: Super Micro Computer Inc Device de80
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 5000 [size=256]
Region 2: Memory at f8300000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at f8320000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain, Size: 31867 bytes --]
Linux version 2.6.33-rc6-git5 (root@TM_01_C1) (gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #3 SMP Mon Feb 8 17:39:22 UTC 2010
Command line: root=/dev/md2
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dff50000 (usable)
BIOS-e820: 00000000dff50000 - 00000000dff5e000 (ACPI data)
BIOS-e820: 00000000dff5e000 - 00000000dff5f000 (ACPI NVS)
BIOS-e820: 00000000dff5f000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000320000000 (usable)
NX (Execute Disable) protection: active
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x320000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask 3FE0000000 uncachable
1 base 0000000000 mask 3E00000000 write-back
2 base 0200000000 mask 3F00000000 write-back
3 base 0300000000 mask 3FE0000000 write-back
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdff50 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000f6040] f6040
init_memory_mapping: 0000000000000000-00000000dff50000
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dff50000 page 4k
kernel direct mapping tables up to dff50000 @ 12000-18000
init_memory_mapping: 0000000100000000-0000000320000000
0100000000 - 0320000000 page 2M
kernel direct mapping tables up to 320000000 @ 16000-24000
ACPI: RSDP 00000000000f6010 00024 (v02 PTLTD )
ACPI: XSDT 00000000dff56c1e 0009C (v01 SHIMAS SDS-ONE 06040000 LTP 00000000)
ACPI: FACP 00000000dff5dc26 000F4 (v03 INTEL SANCLMNT 06040000 PTL 00000003)
ACPI: DSDT 00000000dff5878c 05416 (v01 Intel SANCLMNT 06040000 MSFT 03000001)
ACPI: FACS 00000000dff5efc0 00040
ACPI: APIC 00000000dff5dd1a 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 00000000dff5ddd6 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: BOOT 00000000dff5de12 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SPCR 00000000dff5de3a 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
ACPI: SLIC 00000000dff5de8a 00176 (v01 SHIMAS SDS-ONE 06040000 LTP 00000000)
ACPI: SSDT 00000000dff5852d 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20080321)
ACPI: SSDT 00000000dff58487 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20080321)
ACPI: SSDT 00000000dff583e1 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20080321)
ACPI: SSDT 00000000dff5833b 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20080321)
ACPI: SSDT 00000000dff58295 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20080321)
ACPI: SSDT 00000000dff581ef 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20080321)
ACPI: SSDT 00000000dff58149 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20080321)
ACPI: SSDT 00000000dff580a3 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20080321)
ACPI: SSDT 00000000dff56cba 013E9 (v01 PmRef CpuPm 00003000 INTL 20080321)
ACPI: Local APIC address 0xfee00000
(11 early reservations) ==> bootmem [0000000000 - 0320000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 000169b180] TEXT DATA BSS ==> [0001000000 - 000169b180]
#2 [000169c000 - 000169c1b4] BRK ==> [000169c000 - 000169c1b4]
#3 [00000f6050 - 0000100000] BIOS reserved ==> [00000f6050 - 0000100000]
#4 [00000f6040 - 00000f6050] MP-table mpf ==> [00000f6040 - 00000f6050]
#5 [000009cc00 - 000009d071] BIOS reserved ==> [000009cc00 - 000009d071]
#6 [000009d255 - 00000f6040] BIOS reserved ==> [000009d255 - 00000f6040]
#7 [000009d071 - 000009d255] MP-table mpc ==> [000009d071 - 000009d255]
#8 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
#9 [0000012000 - 0000016000] PGTABLE ==> [0000012000 - 0000016000]
#10 [0000016000 - 000001f000] PGTABLE ==> [0000016000 - 000001f000]
[ffffea0000000000-ffffea000affffff] PMD -> [ffff880028600000-ffff880032ffffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00320000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x000dff50
0: 0x00100000 -> 0x00320000
On node 0 totalpages: 3145436
DMA zone: 56 pages used for memmap
DMA zone: 113 pages reserved
DMA zone: 3811 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 898952 pages, LIFO batch:31
Normal zone: 30464 pages used for memmap
Normal zone: 2197760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at f0000000 (gap: f0000000:ec00000)
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880028200000 s79704 r8192 d22696 u262144
pcpu-alloc: s79704 r8192 d22696 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3100523
Kernel command line: root=/dev/md2
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Checking aperture...
No AGP bridge found
Memory: 12308048k/13107200k available (3481k kernel code, 525456k absent, 272700k reserved, 2056k data, 480k init)
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2999.651 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.30 BogoMIPS (lpj=11998604)
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping 06
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (48005.71 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-05] at [mem 0xe0000000-0xe05fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe05fffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:08.0: reg 10: [mem 0xfe700000-0xfe7003ff 64bit]
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
pci 0000:00:1a.7: reg 10: [mem 0xf8600800-0xf8600bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.7: reg 10: [mem 0xf8600c00-0xf8600fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.2: reg 10: [io 0x1c10-0x1c17]
pci 0000:00:1f.2: reg 14: [io 0x1c04-0x1c07]
pci 0000:00:1f.2: reg 18: [io 0x1c08-0x1c0f]
pci 0000:00:1f.2: reg 1c: [io 0x1c00-0x1c03]
pci 0000:00:1f.2: reg 20: [io 0x18a0-0x18bf]
pci 0000:00:1f.2: reg 24: [mem 0xf8600000-0xf86007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf8601000-0xf86010ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x1100-0x111f]
pci 0000:01:00.0: reg 10: [mem 0xf8040000-0xf805ffff]
pci 0000:01:00.0: reg 14: [mem 0xf8000000-0xf803ffff]
pci 0000:01:00.0: reg 18: [io 0x2000-0x201f]
pci 0000:01:00.0: reg 1c: [mem 0xf8060000-0xf8063fff]
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: PME# disabled
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:04:00.0: reg 10: [mem 0xf8100000-0xf811ffff]
pci 0000:04:00.0: reg 18: [io 0x3000-0x301f]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf8100000-0xf81fffff]
pci 0000:05:00.0: reg 10: [mem 0xf8200000-0xf821ffff]
pci 0000:05:00.0: reg 18: [io 0x4000-0x401f]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 05-05]
pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.5: bridge window [mem 0xf8200000-0xf82fffff]
pci 0000:06:01.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:06:01.0: reg 14: [io 0x5000-0x50ff]
pci 0000:06:01.0: reg 18: [mem 0xf8300000-0xf830ffff]
pci 0000:06:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:06:01.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xf83fffff]
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 *7 10 11 14 15)
vgaarb: device added: PCI:0000:06:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0600-0x063f] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1180-0x11bf] has been reserved
system 00:01: [io 0xfe00] has been reserved
system 00:01: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] could not be reserved
system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
pci 0000:00:04.0: BAR 8: assigned [mem 0xf8400000-0xf85fffff]
pci 0000:00:04.0: BAR 9: assigned [mem 0xf8700000-0xf88fffff 64bit pref]
pci 0000:00:1c.0: BAR 8: assigned [mem 0xf8900000-0xf8afffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xf8b00000-0xf8cfffff 64bit pref]
pci 0000:00:1c.4: BAR 9: assigned [mem 0xf8d00000-0xf8efffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0xf8f00000-0xf90fffff 64bit pref]
pci 0000:00:04.0: BAR 7: assigned [io 0x6000-0x6fff]
pci 0000:00:1c.0: BAR 7: assigned [io 0x7000-0x7fff]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:04.0: bridge window [mem 0xf8400000-0xf85fffff]
pci 0000:00:04.0: bridge window [mem 0xf8700000-0xf88fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0xf8900000-0xf8afffff]
pci 0000:00:1c.0: bridge window [mem 0xf8b00000-0xf8cfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf8100000-0xf81fffff]
pci 0000:00:1c.4: bridge window [mem 0xf8d00000-0xf8efffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 05-05]
pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.5: bridge window [mem 0xf8200000-0xf82fffff]
pci 0000:00:1c.5: bridge window [mem 0xf8f00000-0xf90fffff 64bit pref]
pci 0000:06:01.0: BAR 6: assigned [mem 0xf8320000-0xf833ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 06-06]
pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xf83fffff]
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf80fffff]
pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0xf8400000-0xf85fffff]
pci_bus 0000:02: resource 2 [mem 0xf8700000-0xf88fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:03: resource 1 [mem 0xf8900000-0xf8afffff]
pci_bus 0000:03: resource 2 [mem 0xf8b00000-0xf8cfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xf8100000-0xf81fffff]
pci_bus 0000:04: resource 2 [mem 0xf8d00000-0xf8efffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xf8200000-0xf82fffff]
pci_bus 0000:05: resource 2 [mem 0xf8f00000-0xf90fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xf8300000-0xf83fffff]
pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
pci_bus 0000:06: resource 3 [io 0x0000-0xffff]
pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 7, 786432 bytes)
UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Disabling L0s
pci 0000:06:01.0: Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Simple Boot Flag at 0x39 set to 0x1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 24041
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:04.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:04.0:pcie02: AER service couldn't init device: no _OSC support
input: Power Button as /class/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /class/input/input1
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0: no devices on the port
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: no devices on the port
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf8600000 port 0xf8600100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xf8600000 port 0xf8600180 irq 29
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf8600000 port 0xf8600380 irq 29
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:04:00.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
e1000e 0000:04:00.0: irq 30 for MSI/MSI-X
0000:04:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:30:48:d3:33:67
0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:04:00.0: eth0: MAC: 2, PHY: 2, PBA No: 0100ff-0ff
e1000e 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:05:00.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
e1000e 0000:05:00.0: irq 31 for MSI/MSI-X
0000:05:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:d3:33:68
0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection
0000:05:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.44-k2
ixgbe: Copyright (c) 1999-2010 Intel Corporation.
ixgbe 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ixgbe 0000:01:00.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
ixgbe 0000:01:00.0: irq 32 for MSI/MSI-X
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
ixgbe 0000:01:00.0: irq 33 for MSI/MSI-X
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
ixgbe 0000:01:00.0: irq 34 for MSI/MSI-X
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
ixgbe 0000:01:00.0: irq 35 for MSI/MSI-X
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
ixgbe 0000:01:00.0: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
ixgbe 0000:01:00.0: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
ixgbe 0000:01:00.0: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
ixgbe 0000:01:00.0: irq 39 for MSI/MSI-X
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
ixgbe 0000:01:00.0: irq 40 for MSI/MSI-X
ixgbe: 0000:01:00.0: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8
ixgbe 0000:01:00.0: (PCI Express:2.5Gb/s:Width x8) 00:30:48:d3:33:66
ixgbe 0000:01:00.0: MAC: 1, PHY: 0, PBA No: ffffff-0ff
ixgbe 0000:01:00.0: Intel(R) 10 Gigabit Network Connection
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf8600800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8600c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001860
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001880
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: failed to enable AA(error_mask=0x1)
ata1.00: ATA-8: ST3160310CS, SC14, max UDMA/133
ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: failed to enable AA(error_mask=0x1)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3160310CS SC14 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
w83697hf/hg WDT: WDT driver for W83697HF/HG initializing
w83697hf/hg WDT: Looking for watchdog at address 0x2e
w83697hf/hg WDT: watchdog not found at address 0x2e
w83697hf/hg WDT: No W83697HF/HG could be found
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
GACT probability NOT on
Mirror/redirect action on
u32 classifier
Actions configured
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: failed to enable AA(error_mask=0x1)
ata2.00: ATA-8: ST3160310CS, SC14, max UDMA/133
ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: failed to enable AA(error_mask=0x1)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST3160310CS SC14 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 4 and added 4 devices.
md: autorun ...
md: considering sdb2 ...
md: adding sdb2 ...
md: sdb1 has different UUID to sdb2
md: adding sda2 ...
md: sda1 has different UUID to sdb2
md: created md2
md: bind<sda2>
md: bind<sdb2>
md: running: <sdb2><sda2>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: detected capacity change from 0 to 34998452224
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md1
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 1003356160
md: ... autorun DONE.
md2: unknown partition table
REISERFS (device md2): found reiserfs format "3.6" with standard journal
REISERFS (device md2): using ordered data mode
REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device md2): checking transaction log (md2)
REISERFS (device md2): Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly on device 9:2.
Freeing unused kernel memory: 480k freed
md1: unknown partition table
Unable to find swap-space signature
Unable to find swap-space signature
^ permalink raw reply [flat|nested] 11+ messages in thread