* Linux support for 802.3af?
@ 2010-03-13 0:01 Philip A. Prindeville
2010-03-13 0:43 ` Ben Hutchings
0 siblings, 1 reply; 4+ messages in thread
From: Philip A. Prindeville @ 2010-03-13 0:01 UTC (permalink / raw)
To: netdev
I was looking at this Marvell-based 4-port PCI card with PoE and
thinking it would be handy for powering cameras and ip-phones, but don't
remember seeing any kernel support for 802.3af...
http://www.korenix.com/jetcard-PoE_Universal_PCI_Card-2215-overview.htm
There's no support for 802.3af, right?
Thanks,
-Philip
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Linux support for 802.3af?
2010-03-13 0:01 Linux support for 802.3af? Philip A. Prindeville
@ 2010-03-13 0:43 ` Ben Hutchings
2010-03-13 1:11 ` Philip A. Prindeville
0 siblings, 1 reply; 4+ messages in thread
From: Ben Hutchings @ 2010-03-13 0:43 UTC (permalink / raw)
To: Philip A. Prindeville; +Cc: netdev
On Fri, 2010-03-12 at 17:01 -0700, Philip A. Prindeville wrote:
> I was looking at this Marvell-based 4-port PCI card with PoE and
> thinking it would be handy for powering cameras and ip-phones, but don't
> remember seeing any kernel support for 802.3af...
>
> http://www.korenix.com/jetcard-PoE_Universal_PCI_Card-2215-overview.htm
>
> There's no support for 802.3af, right?
The standard MDIO ioctls can be used to access registers 11 and 12 on
PHYs with integrated PSE functionality. There is no way of indicating
whether a PHY has such functionality, but a flag for this could be added
to the mdio_support field of struct ethtool_cmd.
Ben.
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Linux support for 802.3af?
2010-03-13 0:43 ` Ben Hutchings
@ 2010-03-13 1:11 ` Philip A. Prindeville
2010-03-13 4:40 ` Ben Hutchings
0 siblings, 1 reply; 4+ messages in thread
From: Philip A. Prindeville @ 2010-03-13 1:11 UTC (permalink / raw)
To: Ben Hutchings; +Cc: netdev
On 03/12/2010 05:43 PM, Ben Hutchings wrote:
> On Fri, 2010-03-12 at 17:01 -0700, Philip A. Prindeville wrote:
>> I was looking at this Marvell-based 4-port PCI card with PoE and
>> thinking it would be handy for powering cameras and ip-phones, but don't
>> remember seeing any kernel support for 802.3af...
>>
>> http://www.korenix.com/jetcard-PoE_Universal_PCI_Card-2215-overview.htm
>>
>> There's no support for 802.3af, right?
>
> The standard MDIO ioctls can be used to access registers 11 and 12 on
> PHYs with integrated PSE functionality. There is no way of indicating
> whether a PHY has such functionality, but a flag for this could be added
> to the mdio_support field of struct ethtool_cmd.
>
> Ben.
Well, there's more to it than that, right?
There's a software state machine that's required to go through the handshake, there's prioritization and power budgeting, etc. Yes?
What am I missing?
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Linux support for 802.3af?
2010-03-13 1:11 ` Philip A. Prindeville
@ 2010-03-13 4:40 ` Ben Hutchings
0 siblings, 0 replies; 4+ messages in thread
From: Ben Hutchings @ 2010-03-13 4:40 UTC (permalink / raw)
To: Philip A. Prindeville; +Cc: netdev
On Fri, 2010-03-12 at 18:11 -0700, Philip A. Prindeville wrote:
> On 03/12/2010 05:43 PM, Ben Hutchings wrote:
> > On Fri, 2010-03-12 at 17:01 -0700, Philip A. Prindeville wrote:
> >> I was looking at this Marvell-based 4-port PCI card with PoE and
> >> thinking it would be handy for powering cameras and ip-phones, but don't
> >> remember seeing any kernel support for 802.3af...
> >>
> >> http://www.korenix.com/jetcard-PoE_Universal_PCI_Card-2215-overview.htm
> >>
> >> There's no support for 802.3af, right?
> >
> > The standard MDIO ioctls can be used to access registers 11 and 12 on
> > PHYs with integrated PSE functionality. There is no way of indicating
> > whether a PHY has such functionality, but a flag for this could be added
> > to the mdio_support field of struct ethtool_cmd.
> >
> > Ben.
>
> Well, there's more to it than that, right?
>
> There's a software state machine that's required to go through the
> handshake, there's prioritization and power budgeting, etc. Yes?
>
> What am I missing?
We seem to have contrary expectations of how a PSE would be implemented.
You assume that the CPU would be involved at quite a low level. I
assume that a PSE in a Linux system would be implemented on a peripheral
device and that it would be managed from the host via MDIO (though this
is specified as an optional feature).
Looking at the specs, that particular card is using a Marvell switch
chip which doesn't have any PoE support, so management via MDIO seems
unlikely. If you're curious I suppose you should try to get the driver
from this vendor.
Ben.
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-03-13 4:40 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-03-13 0:01 Linux support for 802.3af? Philip A. Prindeville
2010-03-13 0:43 ` Ben Hutchings
2010-03-13 1:11 ` Philip A. Prindeville
2010-03-13 4:40 ` Ben Hutchings
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).