From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from antelope.ash.relay.mailchannels.net ([23.83.222.4]:18091 "EHLO antelope.ash.relay.mailchannels.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751505AbeBYAIN (ORCPT ); Sat, 24 Feb 2018 19:08:13 -0500 Date: Sat, 24 Feb 2018 18:08:06 -0600 In-Reply-To: <20180223135831.GG1322@alphalink.fr> References: <20180221113016.Horde.bnaHnfikhTwZx9ycOfQ4I5n@webmail.codeholics.com> <20180221183237.5c66f668@epycfail> <20180221123731.Horde.ARNZ_7cjlJ-Ls7HtowM8hx4@webmail.codeholics.com> <20180221220319.06553d7d@epycfail> <58654c59-a685-a8cf-e09a-259d1fe6756f@codeholics.com> <20180222083603.GA1375@alphalink.fr> <20180222120819.Horde.Rd9lrehb0_On4xF52H_vmFu@webmail.codeholics.com> <20180223135831.GG1322@alphalink.fr> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8BIT Subject: Re: ss issue on arm not showing UDP listening ports To: Guillaume Nault CC: Stefano Brivio , netdev@vger.kernel.org From: Jesse Cooper Message-ID: <4C5C3F7D-4BA8-4405-9E18-9C338027A2B6@codeholics.com> Sender: netdev-owner@vger.kernel.org List-ID: Thank you all for your help. This has been very educational. I will change the settings on my build and create a new image. On February 23, 2018 7:58:31 AM CST, Guillaume Nault wrote: >On Thu, Feb 22, 2018 at 12:08:19PM -0500, jesse_cooper@codeholics.com >wrote: >> >> Quoting Guillaume Nault : >> >> > On Wed, Feb 21, 2018 at 07:59:24PM -0600, Jesse Cooper wrote: >> > > Thank you for the suggestions. This is on a raspberry pi 3 not >sure if >> > > that fact matters. I will notify Raspbian of the issue. >> > > >> > Does your kernel have CONFIG_INET_UDP_DIAG? >> >> grep CONFIG_INET_UDP_DIAG kernel.config >> # CONFIG_INET_UDP_DIAG is not set >> >> sudo modprobe udp_diag >> modprobe: FATAL: Module udp_diag not found in directory >> /lib/modules/4.9.59-v7+ >> >> Can this module be loaded after the fact? If so what is the easiest >way to >> get the proper .ko file? >> >Just recompile with CONFIG_INET_UDP_DIAG=m (or ask your distribution to >do so). That should be enough to fix the problem. -- Jesse Cooper