From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Jan Beulich" Subject: [PATCH] 3c59x: fix regression from patch "Add ethtool WOL support" Date: Mon, 27 Sep 2010 12:37:49 +0100 Message-ID: <4CA09E2D0200007800019050@vpn.id2.novell.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 8BIT Cc: , To: Return-path: Content-Disposition: inline Sender: netdev-owner@vger.kernel.org List-ID: This patch (commit 690a1f2002a3091bd18a501f46c9530f10481463) added a new call site for acpi_set_WOL() without checking that the function is actually suitable to be called via vortex_set_wol+0xcd/0xe0 [3c59x] dev_ethtool+0xa5a/0xb70 dev_ioctl+0x2e0/0x4b0 T.961+0x49/0x50 sock_ioctl+0x47/0x290 do_vfs_ioctl+0x7f/0x340 sys_ioctl+0x80/0xa0 system_call_fastpath+0x16/0x1b i.e. outside of code paths run when the device is not yet enabled or already disabled. In particular, putting the device into D3hot is a pretty bad idea when it was already brought up. Furthermore, all prior callers of the function made sure they're actually dealing with a PCI device, while the newly added one didn't. In the same spirit, the .get_wol handler shouldn't indicate support for WOL for non-PCI devices. Signed-off-by: Jan Beulich Cc: Andrew O. Shadoura --- drivers/net/3c59x.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- linux-2.6.36-rc5/drivers/net/3c59x.c +++ 2.6.36-rc5-3c59x-WOL/drivers/net/3c59x.c @@ -2942,6 +2942,9 @@ static void vortex_get_wol(struct net_de { struct vortex_private *vp = netdev_priv(dev); + if (!VORTEX_PCI(vp)) + return; + wol->supported = WAKE_MAGIC; wol->wolopts = 0; @@ -2952,6 +2955,10 @@ static void vortex_get_wol(struct net_de static int vortex_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct vortex_private *vp = netdev_priv(dev); + + if (!VORTEX_PCI(vp)) + return -EOPNOTSUPP; + if (wol->wolopts & ~WAKE_MAGIC) return -EINVAL; @@ -3201,6 +3208,9 @@ static void acpi_set_WOL(struct net_devi return; } + if (VORTEX_PCI(vp)->current_state < PCI_D3hot) + return; + /* Change the power state to D3; RxEnable doesn't take effect. */ pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot); }