netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Oliver Hartkopp <socketcan-fJ+pQTUTwRTk1uMJSBkQmQ@public.gmane.org>
To: David Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
Cc: SocketCAN Core Mailing List
	<socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org>,
	Linux Netdev List
	<netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH net-next-2.6] can-raw: add msg_flags to distinguish local traffic
Date: Tue, 19 Oct 2010 21:32:04 +0200	[thread overview]
Message-ID: <4CBDF234.9000509@hartkopp.net> (raw)

CAN has no addressing scheme. It is currently impossible for userspace
to tell is a received CAN frame comes from another process on the local
host, or from a remote CAN device.

This patch add support for userspace applications to distinguish between
'own', 'local' and 'remote' CAN traffic. The distinction is made by returning
flags in msg->msg_flags in the call to recvmsg().

The added documentation explains the introduced flags.

Signed-off-by: Kurt Van Dijck <kurt.van.dijck-/BeEPy95v10@public.gmane.org>
Signed-off-by: Oliver Hartkopp <socketcan-fJ+pQTUTwRTk1uMJSBkQmQ@public.gmane.org>

---

 Documentation/networking/can.txt |   12 ++++++++++++
 net/can/raw.c                    |   33 ++++++++++++++++++++++++++++++---
 2 files changed, 42 insertions(+), 3 deletions(-)

diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index cd79735..5b04b67 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -22,6 +22,7 @@ This file contains
       4.1.2 RAW socket option CAN_RAW_ERR_FILTER
       4.1.3 RAW socket option CAN_RAW_LOOPBACK
       4.1.4 RAW socket option CAN_RAW_RECV_OWN_MSGS
+      4.1.5 RAW socket returned message flags
     4.2 Broadcast Manager protocol sockets (SOCK_DGRAM)
     4.3 connected transport protocols (SOCK_SEQPACKET)
     4.4 unconnected transport protocols (SOCK_DGRAM)
@@ -471,6 +472,17 @@ solution for a couple of reasons:
     setsockopt(s, SOL_CAN_RAW, CAN_RAW_RECV_OWN_MSGS,
                &recv_own_msgs, sizeof(recv_own_msgs));
 
+  4.1.5 RAW socket returned message flags
+
+  When using recvmsg() call, the msg->msg_flags may contain following flags:
+
+    MSG_DONTROUTE: set when the received frame was created on the local host.
+
+    MSG_CONFIRM: set when the frame was sent via the socket it is received on.
+      This flag can be interpreted as a 'transmission confirmation' when the
+      CAN driver supports the echo of frames on driver level, see 3.2 and 6.2.
+      In order to receive such messages, CAN_RAW_RECV_OWN_MSGS must be set.
+
   4.2 Broadcast Manager protocol sockets (SOCK_DGRAM)
   4.3 connected transport protocols (SOCK_SEQPACKET)
   4.4 unconnected transport protocols (SOCK_DGRAM)
diff --git a/net/can/raw.c b/net/can/raw.c
index 7d77e67..e88f610 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -90,23 +90,39 @@ struct raw_sock {
 	can_err_mask_t err_mask;
 };
 
+/*
+ * Return pointer to store the extra msg flags for raw_recvmsg().
+ * We use the space of one unsigned int beyond the 'struct sockaddr_can'
+ * in skb->cb.
+ */
+static inline unsigned int *raw_flags(struct sk_buff *skb)
+{
+	BUILD_BUG_ON(sizeof(skb->cb) <= (sizeof(struct sockaddr_can) +
+					 sizeof(unsigned int)));
+
+	/* return pointer after struct sockaddr_can */
+	return (unsigned int *)(&((struct sockaddr_can *)skb->cb)[1]);
+}
+
 static inline struct raw_sock *raw_sk(const struct sock *sk)
 {
 	return (struct raw_sock *)sk;
 }
 
-static void raw_rcv(struct sk_buff *skb, void *data)
+static void raw_rcv(struct sk_buff *oskb, void *data)
 {
 	struct sock *sk = (struct sock *)data;
 	struct raw_sock *ro = raw_sk(sk);
 	struct sockaddr_can *addr;
+	struct sk_buff *skb;
+	unsigned int *pflags;
 
 	/* check the received tx sock reference */
-	if (!ro->recv_own_msgs && skb->sk == sk)
+	if (!ro->recv_own_msgs && oskb->sk == sk)
 		return;
 
 	/* clone the given skb to be able to enqueue it into the rcv queue */
-	skb = skb_clone(skb, GFP_ATOMIC);
+	skb = skb_clone(oskb, GFP_ATOMIC);
 	if (!skb)
 		return;
 
@@ -123,6 +139,14 @@ static void raw_rcv(struct sk_buff *skb, void *data)
 	addr->can_family  = AF_CAN;
 	addr->can_ifindex = skb->dev->ifindex;
 
+	/* add CAN specific message flags for raw_recvmsg() */
+	pflags = raw_flags(skb);
+	*pflags = 0;
+	if (oskb->sk)
+		*pflags |= MSG_DONTROUTE;
+	if (oskb->sk == sk)
+		*pflags |= MSG_CONFIRM;
+
 	if (sock_queue_rcv_skb(sk, skb) < 0)
 		kfree_skb(skb);
 }
@@ -707,6 +731,9 @@ static int raw_recvmsg(struct kiocb *iocb, struct socket *sock,
 		memcpy(msg->msg_name, skb->cb, msg->msg_namelen);
 	}
 
+	/* assign the flags that have been recorded in raw_rcv() */
+	msg->msg_flags |= *(raw_flags(skb));
+
 	skb_free_datagram(sk, skb);
 
 	return size;

             reply	other threads:[~2010-10-19 19:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-19 19:32 Oliver Hartkopp [this message]
     [not found] ` <4CBDF234.9000509-fJ+pQTUTwRTk1uMJSBkQmQ@public.gmane.org>
2010-10-19 19:58   ` [PATCH net-next-2.6] can-raw: add msg_flags to distinguish local traffic Kurt Van Dijck
     [not found]     ` <20101019195808.GA318-MxZ6Iy/zr/UdbCeoMzGj59i2O/JbrIOy@public.gmane.org>
2010-10-19 20:06       ` Oliver Hartkopp
2010-10-21 11:32   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4CBDF234.9000509@hartkopp.net \
    --to=socketcan-fj+pqtutwrtk1umjsbkqmq@public.gmane.org \
    --cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
    --cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).