[PATCH net-next-2.6 16/17 v3] can: EG20T PCH: Fix incorrect return processing

[PATCH net-next-2.6 16/17 v3] can: EG20T PCH: Fix incorrect return processing

[Tomoya MORINAGA]

Fix incorrect return processing

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
---
 drivers/net/can/pch_can.c |   20 ++++++++++++--------
 1 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index c612a99..48f4a2e 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -589,10 +589,12 @@ static irqreturn_t pch_can_interrupt(int irq, void
*dev_id)
 	struct net_device *ndev = (struct net_device *)dev_id;
 	struct pch_can_priv *priv = netdev_priv(ndev);

-	pch_can_set_int_enables(priv, PCH_CAN_NONE);
-	napi_schedule(&priv->napi);
-
-	return IRQ_HANDLED;
+	if ((pch_can_int_pending(priv) > 0) && (dev_id != NULL)) {
+		pch_can_set_int_enables(priv, PCH_CAN_NONE);
+		napi_schedule(&priv->napi);
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
 }

 static void pch_fifo_thresh(struct pch_can_priv *priv, int obj_id)
@@ -674,7 +676,7 @@ static int pch_can_rx_normal(struct net_device
*ndev, u32 obj_num, int quota)
 		if (reg & PCH_IF_MCONT_MSGLOST) {
 			rtn = pch_can_rx_msg_lost(ndev, obj_num);
 			if (!rtn)
-				return rtn;
+				return rcv_pkts;
 			rcv_pkts++;
 			quota--;
 			obj_num++;
@@ -777,10 +779,12 @@ static int pch_can_poll(struct napi_struct *napi,
int quota)
 		goto end;

 	if ((int_stat >= PCH_RX_OBJ_START) && (int_stat <= PCH_RX_OBJ_END)) {
-		rcv_pkts += pch_can_rx_normal(ndev, int_stat, quota);
-		quota -= rcv_pkts;
-		if (quota < 0)
+		rcv_pkts = pch_can_rx_normal(ndev, int_stat, quota);
+		if (rcv_pkts < 0) {
+			rcv_pkts = 0;
 			goto end;
+		}
+		quota -= rcv_pkts;
 	} else if ((int_stat >= PCH_TX_OBJ_START) &&
 		   (int_stat <= PCH_TX_OBJ_END)) {
 		/* Handle transmission interrupt */
-- 
1.6.0.6

Re: [PATCH net-next-2.6 16/17 v3] can: EG20T PCH: Fix incorrect return processing

[Marc Kleine-Budde]

[-- Attachment #1.1: Type: text/plain, Size: 2831 bytes --]

On 11/24/2010 01:24 PM, Tomoya MORINAGA wrote:
> Fix incorrect return processing

see comments inline

> Signed-off-by: Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>
> ---
>  drivers/net/can/pch_can.c |   20 ++++++++++++--------
>  1 files changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
> index c612a99..48f4a2e 100644
> --- a/drivers/net/can/pch_can.c
> +++ b/drivers/net/can/pch_can.c
> @@ -589,10 +589,12 @@ static irqreturn_t pch_can_interrupt(int irq, void
> *dev_id)
>  	struct net_device *ndev = (struct net_device *)dev_id;
>  	struct pch_can_priv *priv = netdev_priv(ndev);
> 
> -	pch_can_set_int_enables(priv, PCH_CAN_NONE);
> -	napi_schedule(&priv->napi);
> -
> -	return IRQ_HANDLED;
> +	if ((pch_can_int_pending(priv) > 0) && (dev_id != NULL)) {
> +		pch_can_set_int_enables(priv, PCH_CAN_NONE);
> +		napi_schedule(&priv->napi);
> +		return IRQ_HANDLED;
> +	}
> +	return IRQ_NONE;

My comment from the first review still applied here:

dev_id is always != NULL, because you registered your IRQ handler with
it. (BTW: dev_id has already been dereferenced in netdev_priv(), so if
this code is executed, dev_if is != NULL)

Just write:

if (!pch_can_int_pending(priv))
	return IRQ_NONE;

>  }
> 
>  static void pch_fifo_thresh(struct pch_can_priv *priv, int obj_id)
> @@ -674,7 +676,7 @@ static int pch_can_rx_normal(struct net_device
> *ndev, u32 obj_num, int quota)
>  		if (reg & PCH_IF_MCONT_MSGLOST) {
>  			rtn = pch_can_rx_msg_lost(ndev, obj_num);
>  			if (!rtn)
> -				return rtn;
> +				return rcv_pkts;
>  			rcv_pkts++;
>  			quota--;
>  			obj_num++;
> @@ -777,10 +779,12 @@ static int pch_can_poll(struct napi_struct *napi,
> int quota)
>  		goto end;
> 
>  	if ((int_stat >= PCH_RX_OBJ_START) && (int_stat <= PCH_RX_OBJ_END)) {
> -		rcv_pkts += pch_can_rx_normal(ndev, int_stat, quota);
> -		quota -= rcv_pkts;
> -		if (quota < 0)
> +		rcv_pkts = pch_can_rx_normal(ndev, int_stat, quota);
> +		if (rcv_pkts < 0) {
> +			rcv_pkts = 0;
>  			goto end;
> +		}
> +		quota -= rcv_pkts;

you introduced the problem in patch "[PATCH net-next-2.6 6/17 v3] can:
EG20T PCH: Fix endianness issue", please don't do this in the first place.

( This is an example why you should split your patches and give them
proper subject.)

>  	} else if ((int_stat >= PCH_TX_OBJ_START) &&
>  		   (int_stat <= PCH_TX_OBJ_END)) {
>  		/* Handle transmission interrupt */

cheers, Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

[-- Attachment #2: Type: text/plain, Size: 188 bytes --]

_______________________________________________
Socketcan-core mailing list
Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
https://lists.berlios.de/mailman/listinfo/socketcan-core