netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Taku Izumi <izumi.taku@jp.fujitsu.com>
To: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	Jay Vosburgh <fubar@us.ibm.com>
Cc: eric.dumazet@gmail.com, shemminger@vyatta.com
Subject: [PATCH 3/3] bonding: add the debugfs interface to see RLB hash table
Date: Fri, 03 Dec 2010 16:22:42 +0900	[thread overview]
Message-ID: <4CF89AC2.6030606@jp.fujitsu.com> (raw)
In-Reply-To: <4CF89A00.8030902@jp.fujitsu.com>


This patch provices the debugfs interface to see RLB hash table
like the following:

# cat /sys/kernel/debug/bonding/bond0/rlb_hash_table
SourceIP        DestinationIP   Destination MAC   DEV
10.124.196.205  10.124.196.205  ff:ff:ff:ff:ff:ff eth4
10.124.196.205  10.124.196.81   00:19:99:XX:XX:XX eth3
10.124.196.205  10.124.196.1    00:21:d8:XX:XX:XX eth0

This is helpful to check if the receive load balancing works as expected.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>

---
 drivers/net/bonding/bond_debugfs.c |   50 +++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

Index: net-next/drivers/net/bonding/bond_debugfs.c
===================================================================
--- net-next.orig/drivers/net/bonding/bond_debugfs.c
+++ net-next/drivers/net/bonding/bond_debugfs.c
@@ -4,6 +4,7 @@
 #include <linux/netdevice.h>

 #include "bonding.h"
+#include "bond_alb.h"

 #ifdef CONFIG_DEBUG_FS

@@ -12,6 +13,52 @@

 static struct dentry *bonding_debug_root;

+/*
+ *  Show RLB hash table
+ */
+static int bond_debug_rlb_hash_show(struct seq_file *m, void *v)
+{
+	struct bonding *bond = m->private;
+	struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
+	struct rlb_client_info *client_info;
+	u32 hash_index;
+
+	if (bond->params.mode != BOND_MODE_ALB)
+		return 0;
+
+	seq_printf(m, "SourceIP        DestinationIP   "
+			"Destination MAC   DEV\n");
+
+	spin_lock_bh(&(BOND_ALB_INFO(bond).rx_hashtbl_lock));
+
+	hash_index = bond_info->rx_hashtbl_head;
+	for (; hash_index != RLB_NULL_INDEX; hash_index = client_info->next) {
+		client_info = &(bond_info->rx_hashtbl[hash_index]);
+		seq_printf(m, "%-15pI4 %-15pI4 %-17pM %s\n",
+			&client_info->ip_src,
+			&client_info->ip_dst,
+			&client_info->mac_dst,
+			client_info->slave->dev->name);
+	}
+
+	spin_unlock_bh(&(BOND_ALB_INFO(bond).rx_hashtbl_lock));
+
+	return 0;
+}
+
+static int bond_debug_rlb_hash_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, bond_debug_rlb_hash_show, inode->i_private);
+}
+
+static const struct file_operations bond_debug_rlb_hash_fops = {
+	.owner		= THIS_MODULE,
+	.open		= bond_debug_rlb_hash_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
 void bond_debug_register(struct bonding *bond)
 {
 	if (!bonding_debug_root)
@@ -25,6 +72,9 @@ void bond_debug_register(struct bonding
 			bond->dev->name);
 		return;
 	}
+
+	debugfs_create_file("rlb_hash_table", 0400, bond->debug_dir,
+				bond, &bond_debug_rlb_hash_fops);
 }

 void bond_debug_unregister(struct bonding *bond)



  parent reply	other threads:[~2010-12-03  7:22 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-03  7:19 [PATCH v2 0/3] bonding: add the debugfs interface to see RLB hash table Taku Izumi
2010-12-03  7:21 ` [PATCH 1/3] bonding: add the debugfs facility to the bonding driver Taku Izumi
2010-12-10  1:17   ` Taku Izumi
2010-12-11  0:21     ` Jay Vosburgh
2010-12-11  0:23       ` David Miller
2010-12-13  5:09         ` Taku Izumi
2010-12-13  5:15           ` David Miller
2010-12-03  7:22 ` [PATCH 2/3] bonding: migrate some macros from bond_alb.c to bond_alb.h Taku Izumi
2010-12-13  5:03   ` Taku Izumi
2010-12-16 20:35     ` David Miller
2010-12-03  7:22 ` Taku Izumi [this message]
2010-12-13  5:04   ` [PATCH 3/3] bonding: add the debugfs interface to see RLB hash table Taku Izumi
2010-12-16 20:35     ` David Miller
2010-12-08 20:33 ` [PATCH v2 0/3] " Jay Vosburgh
2010-12-09 10:43   ` Taku Izumi
2010-12-10  1:24   ` Taku Izumi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4CF89AC2.6030606@jp.fujitsu.com \
    --to=izumi.taku@jp.fujitsu.com \
    --cc=eric.dumazet@gmail.com \
    --cc=fubar@us.ibm.com \
    --cc=netdev@vger.kernel.org \
    --cc=shemminger@vyatta.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).