[PATCH net-next-2.6 v8 13/20] CAN : Fix bit timing calculation issue

[Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>]

Modify like use calculated value directly passed by CAN core module.

Signed-off-by: Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>
Acked-by: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/net/can/pch_can.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index 3540978..5a6a0df 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -786,17 +786,15 @@ static int pch_set_bittiming(struct net_device *ndev)
 	const struct can_bittiming *bt = &priv->can.bittiming;
 	u32 canbit;
 	u32 bepe;
-	u32 brp;
 
 	/* Setting the CCE bit for accessing the Can Timing register. */
 	pch_can_bit_set(&priv->regs->cont, PCH_CTRL_CCE);
 
-	brp = (bt->tq) / (1000000000/PCH_CAN_CLK) - 1;
-	canbit = brp & PCH_MSK_BITT_BRP;
+	canbit = (bt->brp - 1) & PCH_MSK_BITT_BRP;
 	canbit |= (bt->sjw - 1) << PCH_BIT_SJW_SHIFT;
 	canbit |= (bt->phase_seg1 + bt->prop_seg - 1) << PCH_BIT_TSEG1_SHIFT;
 	canbit |= (bt->phase_seg2 - 1) << PCH_BIT_TSEG2_SHIFT;
-	bepe = (brp & PCH_MSK_BRPE_BRPE) >> PCH_BIT_BRPE_BRPE_SHIFT;
+	bepe = ((bt->brp - 1) & PCH_MSK_BRPE_BRPE) >> PCH_BIT_BRPE_BRPE_SHIFT;
 	iowrite32(canbit, &priv->regs->bitt);
 	iowrite32(bepe, &priv->regs->brpe);
 	pch_can_bit_clear(&priv->regs->cont, PCH_CTRL_CCE);
-- 
1.6.0.6