From: "Paweł Staszewski" <pstaszewski@itcare.pl>
To: Linux Network Development list <netdev@vger.kernel.org>
Subject: Kernel panic eth2 mirred redirect to ifb0
Date: Sun, 19 Dec 2010 12:35:21 +0100 [thread overview]
Message-ID: <4D0DEDF9.7020102@itcare.pl> (raw)
[-- Attachment #1: Type: text/plain, Size: 1849 bytes --]
Hi all
I have panic with kernel 2.6.37-rc6-git2 when use iproute2
mirred/redirect action
host1 (kernel 2.6.36.2)
netperf client -> eth3 (82598EB 10-Gigabit AT CX4) - directly connected
to eth2 of host2
ethtool -k eth3
Offload parameters for eth3:
rx-checksumming: on
tx-checksumming: on
scatter-gather: on
tcp-segmentation-offload: on
udp-fragmentation-offload: off
generic-segmentation-offload: on
generic-receive-offload: on
large-receive-offload: off
rx-vlan-offload: off
tx-vlan-offload: off
ntuple-filters: off
receive-hashing: off
ethtool -i eth3
driver: ixgbe
version: 2.0.84-k2
firmware-version: 1.12-2
bus-info: 0000:03:00.1
host2 (kernel-2.6.37-rc6-git2)
netserver -> eth2 (82598EB 10-Gigabit AT CX4) - directly connected to
eth3 of host1
ethtool -k eth2
Offload parameters for eth2:
rx-checksumming: on
tx-checksumming: on
scatter-gather: on
tcp-segmentation-offload: on
udp-fragmentation-offload: off
generic-segmentation-offload: on
generic-receive-offload: on
large-receive-offload: off
rx-vlan-offload: on
tx-vlan-offload: on
ntuple-filters: off
receive-hashing: off
ethtool -i eth2
driver: ixgbe
version: 2.0.84-k2
firmware-version: 1.12-2
bus-info: 0000:03:00.0
Normally without ifb and redirect netperf show:
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.0.2
(192.168.0.2) port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 10.00 9042.14
Steps to reproduce panic:
ip link set dev ifb0 up
tc qdisc add dev eth2 ingress
tc filter add dev eth2 parent ffff: protocol ip prio 10 u32 \
match ip src 0.0.0.0/0 flowid 1:1 \
action mirred egress redirect dev ifb0
After this when i start netperf on host1 I have panic (screenshot in
attached image).
Thanks
Pawel
[-- Attachment #2: ifb-eth2-mirred-redirect-panic.JPG --]
[-- Type: image/jpeg, Size: 105170 bytes --]
next reply other threads:[~2010-12-19 11:35 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-19 11:35 Paweł Staszewski [this message]
2010-12-19 11:39 ` Kernel panic eth2 mirred redirect to ifb0 Paweł Staszewski
2010-12-19 15:43 ` Eric Dumazet
2010-12-19 16:09 ` Paweł Staszewski
2010-12-19 16:22 ` Changli Gao
2010-12-19 20:34 ` Paweł Staszewski
2010-12-19 22:15 ` Jarek Poplawski
2010-12-19 22:21 ` Jarek Poplawski
2010-12-19 22:26 ` Jarek Poplawski
2010-12-20 8:01 ` Paweł Staszewski
2010-12-20 8:06 ` Eric Dumazet
2010-12-20 9:13 ` Paweł Staszewski
2010-12-20 8:56 ` Changli Gao
2010-12-20 9:08 ` Eric Dumazet
2010-12-20 9:11 ` Changli Gao
2010-12-20 9:21 ` Eric Dumazet
2010-12-20 10:32 ` Jarek Poplawski
2010-12-20 10:41 ` Eric Dumazet
2010-12-20 11:11 ` Jarek Poplawski
2010-12-20 11:58 ` Jarek Poplawski
2010-12-20 12:07 ` Paweł Staszewski
2010-12-20 12:22 ` Jarek Poplawski
2010-12-20 12:45 ` Eric Dumazet
2010-12-20 12:54 ` Eric Dumazet
2010-12-20 13:02 ` Jarek Poplawski
2010-12-20 14:05 ` Changli Gao
2010-12-20 14:25 ` [PATCH net-next-2.6] ifb: add performance flags to dev->features Eric Dumazet
2010-12-20 14:43 ` Changli Gao
2010-12-28 21:50 ` David Miller
2010-12-28 22:36 ` Eric Dumazet
2010-12-28 23:07 ` Jarek Poplawski
2011-01-02 20:24 ` [PATCH v2 net-next-2.6] ifb: add performance flags Eric Dumazet
2011-01-03 19:37 ` Jarek Poplawski
2011-01-03 19:40 ` David Miller
2011-01-03 20:35 ` Eric Dumazet
2011-01-03 20:40 ` David Miller
2010-12-20 12:30 ` Kernel panic eth2 mirred redirect to ifb0 Changli Gao
2010-12-20 13:37 ` Jarek Poplawski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D0DEDF9.7020102@itcare.pl \
--to=pstaszewski@itcare.pl \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).