From: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
Cc: Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 3/3] can: at91_can: make can_id of mailbox 0 configurable
Date: Tue, 11 Jan 2011 12:56:54 +0100 [thread overview]
Message-ID: <4D2C4586.60207@pengutronix.de> (raw)
In-Reply-To: <4D2C42F0.5080703-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
[-- Attachment #1.1: Type: text/plain, Size: 1677 bytes --]
On 01/11/2011 12:45 PM, Wolfgang Grandegger wrote:
> On 01/11/2011 11:28 AM, Marc Kleine-Budde wrote:
>> Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
>> "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox
>> 0 may be send under certain conditions (even if disabled or in rx mode).
>>
>> The workaround in the errata suggests not to use the mailbox and load it
>> with a unused identifier.
>>
>> This patch implements the second part of the workaround. A sysfs entry
>> "mb0_id" is introduced. While the interface is down it can be used to
>> configure the can_id of mailbox 0. The default value id 0x7ff.
>>
>> In order to use an extended can_id add the CAN_EFF_FLAG (0x80000000U)
>> to the can_id. Example:
>>
>> - standard id 0x7ff:
>> echo 0x7ff > /sys/class/net/can0/mb0_id
>>
>> - extended if 0x1fffffff:
^^
I've fixed the typo on my git repo. I'll send an updated series later.
>> echo 0x9fffffff > /sys/class/net/can0/mb0_id
>
> As this is a device specific property, I think it should go into
> /sys/class/net/can0/device/.
The attribute goes autoamtically to /sys/class/net/can0 if you add it to
the driver via:
+ dev->sysfs_groups[0] = &at91_sysfs_attr_group;
I've copied this from the janz-ican3 driver[1].
regards, Marc
[1] http://lxr.linux.no/linux+v2.6.37/drivers/net/can/janz-ican3.c#L1682
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
[-- Attachment #2: Type: text/plain, Size: 188 bytes --]
_______________________________________________
Socketcan-core mailing list
Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
https://lists.berlios.de/mailman/listinfo/socketcan-core
next prev parent reply other threads:[~2011-01-11 11:56 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-11 10:28 [PATCH 0/3] can: at91_can: fix for errata 50.2.6.3 & 50.3.5.3 Marc Kleine-Budde
[not found] ` <1294741688-22699-1-git-send-email-mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-01-11 10:28 ` [PATCH 1/3] can: at91_can: clean up usage of AT91_MB_RX_FIRST and AT91_MB_RX_NUM Marc Kleine-Budde
2011-01-11 10:28 ` [PATCH 2/3] can: at91_can: don't use mailbox 0 Marc Kleine-Budde
2011-01-11 10:28 ` [PATCH 3/3] can: at91_can: make can_id of mailbox 0 configurable Marc Kleine-Budde
[not found] ` <1294741688-22699-4-git-send-email-mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-01-11 11:45 ` Wolfgang Grandegger
[not found] ` <4D2C42F0.5080703-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2011-01-11 11:56 ` Marc Kleine-Budde [this message]
[not found] ` <4D2C4586.60207-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-01-11 12:27 ` Wolfgang Grandegger
[not found] ` <4D2C4CC1.4070109-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2011-01-11 12:33 ` Marc Kleine-Budde
[not found] ` <4D2C4E2D.7050309-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-01-11 13:28 ` Wolfgang Grandegger
[not found] ` <4D2C5B04.4090706-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2011-01-11 13:43 ` Kurt Van Dijck
2011-01-11 11:57 ` Wolfram Sang
[not found] ` <20110111115739.GA25741-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-01-11 12:04 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D2C4586.60207@pengutronix.de \
--to=mkl-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).