netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: David Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
Cc: Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org,
	netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v3 0/3] can: at91_can: fix for errata 50.2.6.3 & 50.3.5.3
Date: Mon, 24 Jan 2011 15:19:16 +0100	[thread overview]
Message-ID: <4D3D8A64.6000305@pengutronix.de> (raw)
In-Reply-To: <1295878532-15769-1-git-send-email-mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>


[-- Attachment #1.1: Type: text/plain, Size: 2083 bytes --]

On 01/24/2011 03:15 PM, Marc Kleine-Budde wrote:
> Hello,
> 
> as promised I've implemented the proposed workaround for the errata
> 50.2.6.3 & 50.3.5.3:
> "Contents of Mailbox 0 can be sent Even if Mailbox is Disabled"
> 
> This means under high bus load it can happen that the mailbox 0 is send
> to the bus. And it does happen, even with the mainline driver where
> Mailbox 0 is a receive mailbox. The errata proposes not to use mailbox 0
> and load it with an unused can_id that will not disturb the bus.
> 
> The first patch cleans up the driver without any functional changes, so
> that the mailbox 0 can be disabled in the second patch. The third patch
> adds a sysfs parameter to the driver, so that the identifier of mailbox 0
> can configured.
> 
> This series applies to net-2.6/master. It has been tested on a ronetix pm9263
> board against a PCI-SJA1000 card with the canfdtest utility and on custom
> at91 boards against each other.

I've updated the patch series in my git-repo, too.

The following changes since commit b30532515f0a62bfe17207ab00883dd262497006:

  bonding: Ensure that we unshare skbs prior to calling pskb_may_pull (2011-01-20 16:45:56 -0800)

are available in the git repository at:
  git://git.pengutronix.de/git/mkl/linux-2.6.git can/at91_can-for-net-2.6

Marc Kleine-Budde (3):
      can: at91_can: clean up usage of AT91_MB_RX_FIRST and AT91_MB_RX_NUM
      can: at91_can: don't use mailbox 0
      can: at91_can: make can_id of mailbox 0 configurable

 Documentation/ABI/testing/sysfs-platform-at91 |   25 +++++
 drivers/net/can/at91_can.c                    |  138 ++++++++++++++++++++-----
 2 files changed, 137 insertions(+), 26 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-platform-at91

regards, Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

[-- Attachment #2: Type: text/plain, Size: 188 bytes --]

_______________________________________________
Socketcan-core mailing list
Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
https://lists.berlios.de/mailman/listinfo/socketcan-core

  parent reply	other threads:[~2011-01-24 14:19 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-24 14:15 [PATCH v3 0/3] can: at91_can: fix for errata 50.2.6.3 & 50.3.5.3 Marc Kleine-Budde
     [not found] ` <1295878532-15769-1-git-send-email-mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-01-24 14:15   ` [PATCH v3 1/3] can: at91_can: clean up usage of AT91_MB_RX_FIRST and AT91_MB_RX_NUM Marc Kleine-Budde
2011-01-24 14:15   ` [PATCH v3 3/3] can: at91_can: make can_id of mailbox 0 configurable Marc Kleine-Budde
2011-01-24 14:19   ` Marc Kleine-Budde [this message]
2011-01-24 23:17     ` [PATCH v3 0/3] can: at91_can: fix for errata 50.2.6.3 & 50.3.5.3 David Miller
2011-01-24 14:15 ` [PATCH v3 2/3] can: at91_can: don't use mailbox 0 Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D3D8A64.6000305@pengutronix.de \
    --to=mkl-bicnvbalz9megne8c9+irq@public.gmane.org \
    --cc=Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org \
    --cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
    --cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).