netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* ipv6 doesn't chose correct source address
@ 2011-02-03 15:10 Stephen Clark
  0 siblings, 0 replies; only message in thread
From: Stephen Clark @ 2011-02-03 15:10 UTC (permalink / raw)
  To: Linux Kernel Network Developers

Hello,

I have a Linux 2.6.32.26-175.fc12 box with
two possible ipv6 default gateways. So I was trying
to have two different ipv6 addresses on my eth0 interface.
Then by simply changing my default ipv6 gateway have packets
routed appropriately.

But when I do this the source address in the packet always is the
first ipv6 address and not the one that should be associated with
the corresponding default route.

ip -6 addr sh
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
     inet6 2001:470:34::129:91/48 scope global
        valid_lft forever preferred_lft forever
     inet6 2001:4830:28::129:91/48 scope global
        valid_lft forever preferred_lft forever
     inet6 fe80::21c:c0ff:fe94:3a12/64 scope link
        valid_lft forever preferred_lft forever

ip -6 rout sh
default via 2001:4830:28::1 dev eth0  metric 1024  mtu 1500 advmss 1440 
hoplimit 0

so I would expect to have packet going out the default address use the 
source address
of 2001:4830:28::129:91

but:
09:50:28.887483 IP6 2001:470:34::129:91 > 2001:558:1002:5:68:87:64:48: 
ICMP6, echo request, seq 1, length 64

I would have expected the source address to be: 2001:4830:28::129:91

This works correctly with ipv4.
ip addr sh eth0
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast 
state UP qlen 1000
     link/ether 00:1c:c0:94:3a:12 brd ff:ff:ff:ff:ff:ff
     inet 10.0.129.91/17 brd 10.0.255.255 scope global eth0
     inet 192.168.198.48/24 scope global eth0
     inet 10.254.150.91/24 scope global eth0
     inet 10.0.1.91/24 scope global eth0
     inet 192.168.3.6/24 scope global eth0
     inet 192.168.198.91/24 scope global secondary eth0

default via 192.168.198.252 dev eth0

09:52:06.968934 IP 192.168.198.48 > 68.87.64.48: ICMP echo request, id 
34402, seq 1, length 64



Is this broken or a feature of ipv6 or a misconfiguration on my part?

Thanks,
Steve

-- 

"They that give up essential liberty to obtain temporary safety,
deserve neither liberty nor safety."  (Ben Franklin)

"The course of history shows that as a government grows, liberty
decreases."  (Thomas Jefferson)




^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2011-02-03 15:10 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-03 15:10 ipv6 doesn't chose correct source address Stephen Clark

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).